CCalclabhub

Business · 44 calculations

Marketing

How To Calculate Customer Retention Rate

Customer retention rate tells you what share of the customers you had at the start of a period you still have at the end. The apparent answer can be misleading unless new customers are removed from the ending count first. This page shows how to isolate genuinely retained customers, then derives the churn rate, the average customer lifetime and the net change in the customer base.

Last updated

Quick Answer

Retention rate = (Customers at end - New customers) / Customers at start

S
Customers at the start of the period
E
Customers at the end of the period
N
New customers acquired during the period
R
Retained customers, equal to E minus N

Subtract new customers acquired during the period from the ending count, then divide by the starting count. With 200 customers at the start, 180 at the end and 30 new customers, the retained count is 150 and the retention rate is 0.75, or 75 per cent. Churn is 0.25, average lifetime is 4.0 periods and net customer growth is -20.0 customers.

What Is Customer Retention Rate?

Customer retention rate measures the proportion of existing customers a business keeps over a defined period. It starts with the number of customers at the beginning, works out how many of those were still present at the end, and divides one by the other. In the worked case the business begins with 200 customers and ends with 180, but 30 of those ending customers were acquired during the period and were not there at the start. Removing them leaves 150 genuinely retained customers, and 150 divided by 200 gives a retention rate of 0.75, which displays as 75 per cent.

The subtraction of new customers is the step that most often goes wrong. The ending count is a snapshot of everyone active on that date, so it mixes two quite different groups: people who stayed from the beginning and people who arrived later. Counting all 180 ending customers against the original 200 would give 0.90, which overstates loyalty because it credits the business for recruitment as though it were retention. Only customers who were present at both ends of the period belong in the numerator, which is why the retained count is calculated as the ending count minus new acquisitions.

Churn rate is the complement of retention and describes the share of the starting base that was lost. Here 200 minus 150 leaves 50 customers who left, and 50 divided by 200 is 0.25, displayed as 25 per cent. Retention and churn always add to one when both are measured against the same starting population, so a retention rate of 0.75 immediately implies churn of 0.25. This identity is a useful check: if the two figures from a report do not sum to one, the denominators or the definitions behind them are different and should be investigated before the numbers are quoted together.

Average customer lifetime in periods turns the churn figure into a duration. Dividing the starting count of 200 by the 50 customers lost gives 4.0 periods. More generally it is the reciprocal of the churn rate, so a 25 per cent loss each period corresponds to an average tenure of four periods. This is a simplifying average rather than a promise that every customer stays exactly four periods: some leave immediately and others remain for far longer, but the reciprocal gives a convenient single number for planning and for comparison with acquisition cost.

Net customer growth describes what happened to the size of the base, and it is a different question from retention. Ending count minus starting count is 180 minus 200, which is -20.0 customers, a decline of ten per cent of the starting base. A business can post a strong retention rate and still shrink if it acquires too few new customers to replace the ones it loses. Here 30 new customers arrived but 50 departed, so the net movement was negative. Reading the two measures together separates the problem of keeping customers from the problem of finding new ones.

The period over which the figures are measured changes their meaning completely. A retention rate of 75 per cent per month is excellent for many subscription businesses, while 75 per cent per year may be unremarkable or poor depending on the sector. Always state the interval and compare like with like. The definition of a customer also matters: an account that has gone quiet but not cancelled, a paying subscriber and a registered user are three different populations, and mixing them makes the calculation unreliable. Decide in advance whether reactivated customers count as new and apply that rule consistently.

It helps to keep retention distinct from revenue retention. The measure here counts customers, treating each one as a single unit regardless of how much they spend. A company might keep 75 per cent of its customers while losing its largest accounts, so customer retention could look healthy while revenue falls. The reverse also happens when a business loses many small customers but keeps its biggest spenders. Revenue-based versions weight each account by its contribution and answer a different question; both are useful, and a material gap between them is a strong signal about where the value sits.

The figures respond predictably to changes in the inputs, which makes them easy to sanity-check. If the ending count were 220 rather than 180 with the same 30 new customers, the retained count would be 190 and the retention rate 0.95, or 95 per cent. Only 10 customers would have been lost, churn would be 0.05, average lifetime would rise to 20.0 periods and net growth would become positive 20 customers. Conversely, a lower ending count reduces retention, raises churn and shortens the implied lifetime. Holding the ending count fixed, a larger number of new customers lowers the measured retention rate because fewer of the ending customers were present at the start.

Every measure has boundaries, and this one is no exception. It records whether a customer remained, not whether they were satisfied, profitable or active, so it does not explain why people left. It also treats all customers as equal, which can hide the loss of a small number of very valuable accounts. A single period can be distorted by a campaign that brought in a large cohort at the end, or by a billing change that reclassified dormant accounts. Use the rate as a trend, pair it with the reasons customers give for leaving and with measures of customer lifetime value, and investigate sudden moves before assuming the underlying behaviour has changed.

Formula

Retention rate = (E - N) / S

Formula page →

Subtract new customers from the ending count to isolate those present at the start, then divide by the starting count. The result is stored as a raw decimal and displayed as a percentage.

SymbolMeaning
ECustomers at end
NNew customers
SCustomers at start

Churn rate = (S - R) / S = 1 - Retention rate

Formula page →

The share of the starting base that was lost. Because both rates share the same denominator, retention and churn sum to one and each is the complement of the other.

SymbolMeaning
SCustomers at start
RRetained customers
CChurn rate

Average lifetime = S / (S - R)

Formula page →

Divide the starting base by the number lost to get the average number of periods a customer stays. It is the reciprocal of the churn rate under a constant-loss assumption.

SymbolMeaning
SCustomers at start
RRetained customers
LAverage lifetime

How To Calculate Customer Retention Rate

  1. 1

    Count the customers at the start

    Take the number of active customers on the first day of the period from the customer system. In the worked case the base is 200. Use the same definition of an active customer that you will use at the end, so the two counts describe the same kind of population rather than, for example, paying subscribers at one end and registered accounts at the other.

  2. 2

    Count the ending customers and the new arrivals

    Record the active count on the final day, which is 180 here, and separately count the customers acquired during the interval, which is 30. The new figure must include everyone who joined and was still active at the end, including reactivated accounts if that is your convention. Keep this number distinct from the ending total.

  3. 3

    Isolate the retained customers

    Subtract new customers from the ending count: 180 minus 30 gives 150 customers who were present at both the start and the end. This is the numerator of the retention rate and the quantity the helper retainedCount computes. Counting all 180 ending customers instead would mix acquisition into loyalty and give a misleadingly high 0.90.

  4. 4

    Compute retention and churn

    Divide the 150 retained customers by the 200 at the start to get 0.75, displayed as 75 per cent. The lost count is 200 minus 150, which is 50, so churn is 50 divided by 200, or 0.25, displayed as 25 per cent. The two rates add to one, which is a quick check that the retained count was calculated correctly.

  5. 5

    Find lifetime and net growth

    Divide the starting 200 by the 50 lost customers to get an average lifetime of 4.0 periods. Then subtract the starting count from the ending count: 180 minus 200 is -20.0 customers of net growth. Keep both percentage outputs as raw decimals in any formula, because the display layer performs the conversion to percentages.

Examples

Example 1: The default retention rate

customersAtStart
200
customersAtEnd
180
newCustomers
30
StepCalculationResult
Customers at startopening active base200
Customers at endclosing active base180
New customersacquired during the period30
Retained customers180 - 30150
Retention rate150 / 2000.75

Result: The customer retention rate is 0.75, or 75 per cent, meaning three quarters of the customers present at the start were still active at the end.

Example 2: Churn and implied lifetime

customersAtStart
200
customersAtEnd
180
newCustomers
30
StepCalculationResult
Retained customers180 - 30150
Customers lost200 - 15050
Churn rate50 / 2000.25
Average lifetime200 / 504.0

Result: Average customer lifetime is 4.0 periods, with a churn rate of 0.25, or 25 per cent, of the starting base lost.

Example 3: Net movement in the base

customersAtStart
200
customersAtEnd
180
newCustomers
30
StepCalculationResult
New customersacquired during the period30
Customers lost200 - 15050
Net customer growth180 - 200-20.0

Result: Net customer growth is -20.0 customers: 30 arrivals were fewer than the 50 departures, so the base contracted by ten per cent of its opening size.

Calculator

Customer retention rate

75.00%

Churn rate
25.00%
Average customer lifetime
4
Net customer growth
-20

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the Customer Retention Rate calculator page.

Common Mistakes

  • Counting every ending customer as retained

    The ending count includes people acquired during the period. Dividing 180 by 200 gives 0.90 instead of the correct 0.75 because it credits new acquisition as loyalty. Subtract the 30 new customers first to isolate the 150 who were present at the start.

  • Using the ending count as the denominator

    Retention measures the share of the starting population that survived, so the denominator must be the 200 customers at the beginning. Dividing retained customers by the ending count answers a different question and makes the rate sensitive to how many new customers were recruited.

  • Writing a multiplication by one hundred in the expression

    The stored values of 0.75 and 0.25 already display as 75 per cent and 25 per cent. Multiplying by one hundred inside the formula would render them as 7,500 per cent and 2,500 per cent. Keep the raw decimals in the expression and let the display layer convert them.

  • Confusing customer retention with revenue retention

    Counting customers treats a small account and a major account as identical. Losing a handful of high-value clients can damage revenue while the customer retention rate stays healthy. Track a revenue-weighted version alongside the headcount measure when accounts differ greatly in size.

  • Comparing rates over different periods

    Seventy-five per cent over a month and seventy-five per cent over a year describe very different levels of loyalty. State the interval explicitly and compare only figures measured over the same duration, otherwise a change in reporting cadence can look like a change in performance.

  • Ignoring the definition of an active customer

    Dormant accounts, cancelled subscriptions and registered users who never bought anything are not interchangeable. If the starting and ending counts use different definitions, the derived retention and churn figures are meaningless. Fix the rule, including how reactivations are treated, before comparing periods.

FAQ

What is customer retention rate?

It is the share of customers present at the start of a period who are still active at the end. Subtract new customers from the ending count to find those who were retained, then divide by the starting count. In the worked example 150 of 200 customers were retained, giving 0.75 or 75 per cent.

Why do you subtract new customers from the ending count?

Because the ending total mixes two groups: customers who stayed from the beginning and customers who arrived later. Only the first group speaks to retention. Using all 180 ending customers against 200 at the start would give 0.90 and wrongly count acquisition as loyalty.

How are retention and churn related?

They are complements when measured against the same starting base. Retention of 0.75 implies churn of 0.25, because the 150 retained and 50 lost customers together make up the original 200. If two published figures do not sum to one, their definitions or denominators differ.

How is average customer lifetime calculated?

Divide the starting count by the number of customers lost over the period. With 200 at the start and 50 lost, the average lifetime is 4.0 periods. This is the reciprocal of the churn rate and assumes the observed loss rate continues steadily.

Can retention be high while the customer base shrinks?

Yes. Here 75 per cent of the original customers stayed, yet 30 arrivals could not replace 50 departures and net growth was -20.0 customers. Retention measures keeping the old base, while net growth also reflects how many new customers are being acquired.

What should I watch when comparing retention rates?

Make sure the period length and the definition of an active customer match, and remember that a headcount rate ignores how much each customer spends. A rate that looks strong can conceal the loss of a few large accounts, so compare it with revenue retention and with customer lifetime value.

References

  1. [1]Wikipedia, Customer retention — https://en.wikipedia.org/wiki/Customer_retention
  2. [2]Wikipedia, Churn rate — https://en.wikipedia.org/wiki/Churn_rate
  3. [3]Wikipedia, Customer lifetime value — https://en.wikipedia.org/wiki/Customer_lifetime_value