CCalclabhub

Business · 44 calculations

Metrics

How To Calculate LTV To CAC Ratio

The LTV-to-CAC ratio answers a single question: is a customer worth more than it cost to win them? It divides lifetime value by acquisition cost and returns a plain multiple that can be compared across channels, products and periods. With a lifetime value of 2400 and an acquisition cost of 400, the ratio is 6.0 — comfortably above the widely used 3.0 benchmark.

Last updated

Quick Answer

LTV to CAC ratio = customer lifetime value / acquisition cost

LTV
Customer lifetime value — the gross profit a customer generates over the whole relationship
CAC
Customer acquisition cost — the full cost of winning one new customer
Ratio
The dimensionless multiple of value returned per unit of acquisition spend

Divide the total value a customer brings over their lifetime by the cost of acquiring that customer. With 2400 of lifetime value and 400 of acquisition cost the ratio is 6.0. Doubling the acquisition cost to 800 halves the ratio to 3.0; the cost consistent with a 3x ratio is 800.0, and the lifetime value needed for a 5x ratio at a 400 cost is 2000.0.

What Is LTV To CAC Ratio?

The LTV-to-CAC ratio divides the total value a customer brings over their lifetime by the cost of acquiring that customer. With a lifetime value of 2400 and an acquisition cost of 400, the ratio is 6.0. That means each customer returns six times what was spent to win them. The figure is a plain multiple with no currency unit, which is why it can be compared across products, channels and periods of very different sizes.

The measure exists to judge growth efficiency. A business can nearly always buy more customers by spending more, but the real question is whether those customers are worth more than they cost to obtain. A ratio of 6.0 suggests the acquisition engine is healthy, while a ratio at or below 1.0 says each customer costs more than they return. Investors favour it because a repeatable, efficient acquisition model is the mark of a business that can scale without running out of cash.

The standard benchmark is 3.0. At that level lifetime value is three times acquisition cost, leaving enough margin to cover the rest of the business. The worked ratio of 6.0 sits well above it. Doubling the acquisition cost from 400 to 800 halves the ratio to 3.0, exactly at the benchmark. That sensitivity is the fastest way to see how much room a company has before its unit economics stop working.

The formula rearranges in both directions. Divide lifetime value by the target ratio to learn the largest acquisition cost that still meets it: 2400 divided by 3 gives 800.0. Multiply acquisition cost by the target ratio to learn the lifetime value needed for that ratio: 400 times 5 gives 2000.0. These two rearrangements turn a diagnostic number into a spending ceiling and a product target, which is why the same calculation is useful in a boardroom and in a marketing plan.

Directionality is worth stating plainly because it is easy to invert by mistake. Holding lifetime value at 2400, a higher acquisition cost always lowers the ratio and a lower cost raises it. Holding the cost at 400, a higher lifetime value raises the ratio and a lower one reduces it. A falling ratio can therefore mean either that marketing has become more expensive or that customers have become less valuable, and those two causes call for opposite responses.

Lifetime value is itself an estimate, and the ratio inherits every weakness in that estimate. It typically combines average revenue per customer, a gross margin and an assumed lifespan or churn rate. If churn is understated, lifetime value is overstated and the ratio flatters the business. The same applies to a margin figure that ignores discounts, refunds or support costs. Treat the ratio as only as trustworthy as the inputs behind it, and revisit those inputs whenever customer behaviour changes.

The acquisition cost in the denominator must be complete. A fully loaded figure includes media spend, platform fees, creative work, sales salaries and any tooling used to win the customer. Counting only advertising spend makes the denominator too small and the ratio too large, a habit that flatters every channel unevenly. The period must also match: a lifetime value built from annual data should be paired with acquisition costs from the same window, not from a single unusually quiet month.

Payback period is the closest companion metric. It asks how long a customer takes to repay the acquisition cost, whereas the ratio asks how much total value they create. In the worked case an acquisition cost of 400 repaid at 200 of gross profit a month is recovered in two months, even though the full relationship is worth 2400. A business with a healthy 6.0 ratio but a slow payback can still face cash pressure, because most of the value arrives later.

The ratio also has limits as a decision tool. It averages across all customers, so a profitable segment can hide an unprofitable one, and a blended figure can justify spending that destroys value in a particular channel. It says nothing about the absolute scale of spending or the time value of money. The calculator returns four core numbers — a ratio of 6.0, a doubled-cost ratio of 3.0, an 800.0 acquisition cost for a 3x ratio and a 2000.0 lifetime value for a 5x ratio — as a starting point for analysis rather than a verdict.

Formula

Ratio = LTV / CAC

Formula page →

Customer lifetime value divided by the full cost of acquiring one customer. With LTV of 2400 and CAC of 400 the result is 6.0, meaning six units of value for each unit of acquisition spend.

SymbolMeaning
LTVCustomer lifetime value
CACCustomer acquisition cost

CAC = LTV / target ratio

Formula page →

Rearrangement that gives the spending ceiling. With LTV of 2400 and a target of 3, the maximum acquisition cost is 800.0.

SymbolMeaning
CACMaximum acquisition cost
LTVCustomer lifetime value
RTarget ratio

LTV = CAC x target ratio

Formula page →

Rearrangement that sets a product target. With CAC of 400 and a target of 5, the lifetime value required is 2000.0.

SymbolMeaning
LTVRequired lifetime value
CACCustomer acquisition cost
RTarget ratio

How To Calculate LTV To CAC Ratio

  1. 1

    Establish the lifetime value

    Estimate the gross profit one customer delivers over the whole relationship, not the raw sales total. Multiply average revenue per customer by gross margin, then by the expected number of periods before churn. In the worked case the lifetime value is 2400. Be conservative with the lifespan assumption, because an optimistic churn figure raises lifetime value and flatters the final ratio.

  2. 2

    Total the cost of acquisition

    Add the fully loaded cost of winning one new customer: media, platform fees, creative work, sales time and any tooling. Divide the total acquisition bill by the number of customers won over the same period. Here that cost is 400. Counting only advertising spend makes the denominator too small and the ratio misleadingly large, so decide what is included before comparing channels.

  3. 3

    Divide lifetime value by acquisition cost

    Compute the ratio as LTV divided by CAC. With 2400 over 400 the answer is 6.0, so each customer returns six times their acquisition cost. The calculator displays this as the primary result. Keep the raw multiple and compare it with the 3.0 benchmark and with your own historical figures, always using the same definitions for both inputs.

  4. 4

    Test a higher acquisition cost

    Hold lifetime value at 2400 and double the acquisition cost to 800. The ratio falls to 3.0, exactly the common benchmark. This step shows how much cost inflation a business can absorb before its economics look ordinary, and it is a useful stress test when planning a more expensive channel or a weaker exchange rate for overseas media.

  5. 5

    Rearrange for a target ratio

    Solve the same relationship for either input. Dividing 2400 by 3 gives 800.0, the acquisition cost consistent with a 3x ratio. Multiplying 400 by 5 gives 2000.0, the lifetime value needed for a 5x ratio at that cost. These two figures convert the ratio from a score into a practical budget ceiling and a product improvement target.

Examples

Example 1: The worked default — 2400 lifetime value, 400 acquisition cost

customerLifetimeValue
2400
acquisitionCost
400
StepCalculationResult
Ratio at double the acquisition costcustomerLifetimeValue / (acquisitionCost * 2)3.0
Acquisition cost for a 3x ratiocustomerLifetimeValue / 3800.0
Lifetime value for a 5x ratioacquisitionCost * 52000.0
LTV-to-CAC ratiocustomerLifetimeValue / acquisitionCost6.0

Result: A lifetime value of 2400 against an acquisition cost of 400 gives an LTV-to-CAC ratio of 6.0. Doubling the cost reduces the ratio to 3.0, the cost consistent with a 3x ratio is 800.0, and the lifetime value needed for a 5x ratio is 2000.0.

Example 2: A costlier channel at the same lifetime value

customerLifetimeValue
2400
acquisitionCost
800
StepCalculationResult
Divide lifetime value by the new costcustomerLifetimeValue / acquisitionCost3.0

Result: Dividing the 2400 lifetime value by the 800 acquisition cost gives a ratio of 3.0, exactly the benchmark and half the original 6.0.

Example 3: Raising lifetime value at the original acquisition cost

customerLifetimeValue
4000
acquisitionCost
400
StepCalculationResult
Divide the improved lifetime value by costcustomerLifetimeValue / acquisitionCost10.0

Result: With lifetime value raised to 4000 and cost held at 400, the ratio becomes 10.0, showing how retention can improve efficiency without changing the media budget.

Calculator

LTV to CAC ratio

6

Ratio at double the acquisition cost
3
Acquisition cost for a 3x ratio
$800.00
Lifetime value for a 5x ratio
$2,000.00

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the LTV To CAC Ratio calculator page.

Common Mistakes

  • Using revenue where gross profit belongs

    Lifetime value must be built from gross profit, not sales. If 2400 of sales carries a 40 per cent margin, the customer is worth 960 before acquisition cost, not 2400, and the true ratio at a 400 cost is 2.4 rather than 6.0. Putting revenue in the numerator is the quickest way to make a weak business look excellent.

  • Understating the acquisition cost

    Counting only media spend ignores sales salaries, creative work, platform charges and software. Each omitted item shrinks the denominator and inflates the ratio. Decide on a fully loaded definition once, apply it to every channel and period, and resist the temptation to include a new cost for one channel but not another.

  • Trusting an optimistic churn assumption

    Lifetime value rises sharply when the assumed lifespan lengthens, so a small change in churn can move the ratio a long way. A customer thought to last four years at 600 a year is worth 2400, but at two years the value is 1200 and the ratio falls from 6.0 to 3.0. Base the lifespan on observed cohorts rather than hope.

  • Mixing periods across numerator and denominator

    A lifetime value calculated from annual figures must be compared with an acquisition cost averaged over the same full year, not one month's spend. A quiet month makes the cost look small and the ratio implausibly high. Align the windows, use trailing data where possible and state the period beside every figure you report.

  • Reading the ratio without the payback period

    A ratio of 6.0 says the relationship is valuable overall, but says nothing about when the cash arrives. If gross profit accrues slowly, the 400 acquisition cost may take many months to recover and strain working capital. Pair the ratio with a payback figure before concluding that a channel is safe to scale.

  • Treating a blended average as the whole story

    A healthy company-wide ratio can conceal a segment that loses money on every customer. Premium buyers may return far more than the average while discount-driven buyers never repay their cost. Break the figure down by channel, product and cohort, and stop scaling any segment whose own ratio sits below the benchmark even if the blended number looks strong.

FAQ

What is a good LTV-to-CAC ratio?

A ratio of 3.0 is the usual benchmark: each customer returns three times what they cost to acquire. Above 3.0 is generally healthy, and the worked case at 6.0 is strong. The right figure depends on gross margin and payback period, so compare against your own break-even and historical cohorts rather than adopting 3.0 blindly.

What does a ratio of 6.0 actually mean?

It means six units of customer value for each unit spent on acquisition. In the worked case 2400 of lifetime value against 400 of cost gives 6.0. Put another way, acquisition consumes about 16.7 per cent of the value each customer creates, leaving the rest to cover the business and its profit.

How is lifetime value estimated?

Multiply average revenue per customer by gross margin, then by the expected number of periods they remain active before churning. Some teams use a retention curve instead of a simple lifespan. Whatever the method, use gross profit rather than revenue and base churn on observed cohorts, because the ratio is highly sensitive to that assumption.

What should be included in acquisition cost?

Include every fully loaded cost of winning a new customer: advertising, platform fees, creative production, sales time, commissions and relevant software. Divide the total by the number of customers acquired in the same period. Leaving out a cost makes the denominator smaller and the ratio misleadingly flattering.

How do I find the acquisition cost that keeps a 3x ratio?

Divide lifetime value by the target ratio. With a lifetime value of 2400, the calculation is 2400 divided by 3, giving 800.0. That is the most you can spend per customer while still achieving 3x. Spending more lowers the ratio; spending less raises it.

How is this different from return on ad spend?

Return on ad spend compares the revenue from advertising with the advertising bill, usually over a short window. The LTV-to-CAC ratio compares the long-run gross profit of a customer with the full cost of acquiring them. One is a campaign measure and the other is a unit-economics measure, so they should be read together rather than treated as interchangeable.

References