CCalclabhub

Finance · 109 calculations

Investing

How To Calculate Price To Book Ratio

The price-to-book ratio compares what the market pays for a company with what its accounts say it is worth. It divides the current share price by the book value per share, and a value below one can suggest a bargain or a business in trouble, while a value above one implies the market is pricing in intangibles and growth. Multiplying each per-share figure by the shares in issue also gives the market capitalisation and the total book equity behind the ratio.

Last updated

Quick Answer

P/B = share price / book value per share

P/B
Price-to-book ratio, a valuation multiple
P
Current market price of one share
B
Book value per share from the latest balance sheet
S
Number of ordinary shares in issue

Divide the share price by the book value per share to get the ratio. A 45 share against 30 of book value per share gives 1.5, meaning the market values the company at one and a half times its accounting equity. With 2,000,000 shares in issue, market capitalisation is 90000000.0 and total book equity is 60000000.0, and dividing one by the other returns the same 1.5.

What Is Price To Book Ratio?

The price-to-book ratio, often written P/B, compares a company's market value with its accounting book value on a per-share basis. It is calculated by dividing the current share price by the book value per share. With a price of 45 and book value of 30 per share, the ratio is 1.5. That single number says the market is paying one and a half times the net asset value recorded in the accounts for each share. Investors use it as a rough measure of how much confidence the market has in assets that accounting rules may not fully capture.

Book value comes from the balance sheet. It is the residual interest of shareholders: total assets minus total liabilities, sometimes called shareholders' equity or net assets. Divide that equity by the number of ordinary shares in issue and you have book value per share, which in the worked case is 30. It is a historical accounting figure, based largely on what assets cost when they were acquired rather than what they would fetch today.

A ratio below one means the market values the company for less than its recorded net assets. On the face of it that looks like a bargain, and value investors have long used a low P/B as a screening tool. A price of 18 against book value of 30 gives 0.6, implying the shares trade at a sixty per cent discount to accounting equity. The interpretation is not automatic, however, because a low ratio can also signal that the market expects those assets to be worth less than the accounts claim, or that the business is losing money.

A ratio above one is the norm for profitable companies. It indicates that investors are prepared to pay more than the recorded net assets, usually because the business earns returns on those assets that exceed the cost of capital. Software, pharmaceuticals and branded consumer firms commonly trade at several times book value because their most valuable assets, such as code, patents and brand strength, are developed internally and never appear on the balance sheet. In the worked case the market pays 1.5 times book, a modest premium that could reflect a solid but unspectacular return on equity.

The per-share figures can be scaled back up to company level. Multiply the share price by the shares outstanding to get market capitalisation: 45 times 2,000,000 gives 90000000.0. Multiply book value per share by the same share count to get total book equity: 30 times 2,000,000 gives 60000000.0. Dividing market capitalisation by book equity must return the same ratio, since the share count cancels out. This cross-check catches a wrong share count or a mismatched unit.

The direction of the ratio is simple but worth setting out. Hold book value per share at 30 and let the price rise from 45 to 60: the P/B climbs from 1.5 to 2.0. Hold the price at 45 and let book value per share fall to 20: the ratio rises to 2.25. A falling ratio can therefore come from a cheaper share price or from a larger equity base, and those two stories have very different implications. Always look at which input moved before drawing a conclusion.

The ratio has genuine limits. If a company has negative shareholders' equity, often after years of losses or large share buybacks, book value per share is negative and the ratio has no meaningful interpretation. Asset-heavy sectors such as banking and insurance report figures that are fairly comparable, but service and technology businesses carry few tangible assets, so their P/B tends to be high for reasons that say little about overvaluation. Historical cost accounting also understates the current value of property bought long ago, which can make an old company look expensive. None of this makes the ratio useless, but it does mean the number must be read with the business model in mind.

Price-to-book sits alongside several other valuation multiples. The price-earnings ratio divides the share price by profit per share and captures what investors pay for earnings rather than assets. Return on equity divides profit by book equity and explains, in part, why a company deserves a premium: a firm earning high returns on its equity should trade above book. Price-to-tangible-book strips out goodwill and other intangibles and is the stricter test for a company built on acquisitions. Reading these measures together is more informative than any one alone.

For the calculation itself, only two numbers are needed, and the share count is only required for the company-level cross-check. Use the most recent published book value and a current share price, and note that the figure will move whenever either changes. A ratio near one deserves a closer look at the quality of the assets and the durability of earnings, not an immediate buy or sell decision. A ratio far above one is not automatically a bubble, nor is a low one automatically a bargain. Used with care, P/B is a quick way to anchor a market price against the accounting record, and its two companion figures show the same story in aggregate terms.

Formula

P/B = P / B

Formula page →

Share price divided by book value per share. With P equal to 45 and B equal to 30, the ratio is 1.5, a multiple with no currency unit.

SymbolMeaning
PShare price
BBook value per share

Market capitalisation = P x S

Formula page →

The market value of all ordinary shares. At 45 per share and 2,000,000 shares the result is 90000000.0.

SymbolMeaning
PShare price
SShares outstanding

Total book equity = B x S

Formula page →

Accounting equity scaled to the whole company. At 30 per share and 2,000,000 shares the result is 60000000.0.

SymbolMeaning
BBook value per share
SShares outstanding

How To Calculate Price To Book Ratio

  1. 1

    Take a current share price

    Use the latest traded price for an ordinary share, preferably taken at the same moment as the other data you are comparing it with. In the worked case the price is 45. Because the price changes on every trading day, record the date alongside the figure so that the ratio can be reproduced later. A price from a stale screenshot will quietly distort an otherwise correct calculation.

  2. 2

    Find the latest book value per share

    Take shareholders' equity from the most recent published balance sheet and divide it by the number of ordinary shares in issue to get book value per share, here 30. If the company reports this figure directly, confirm that it uses the same share count. Check the reporting date too: a price from today divided by accounts from two years ago mixes two different moments in the company's life.

  3. 3

    Divide price by book value per share

    Compute the ratio as share price divided by book value per share. With 45 over 30 the answer is 1.5, so the market pays one and a half times recorded accounting equity. The calculator reports this as the primary result. Keep the raw multiple rather than converting it into a percentage, and compare it with peers in the same sector before deciding whether the premium is large or small.

  4. 4

    Compute market capitalisation

    Multiply the share price by the number of shares outstanding to scale the price up to the whole company. Here 45 times 2,000,000 gives 90000000.0. This figure is the market's assessment of total ordinary equity and is the natural counterpart to the accounting figure computed next. Using the same share count in both steps is essential, or the cross-check will fail.

  5. 5

    Compute total book equity and cross-check

    Multiply book value per share by the shares outstanding: 30 times 2,000,000 gives 60000000.0. Divide market capitalisation by this equity figure and you should recover the original ratio, since 90000000.0 over 60000000.0 is 1.5. If it does not, one of the three inputs is inconsistent. Treat this agreement as a quick integrity check before using the ratio in any comparison.

Examples

Example 1: The worked default — a 45 share against 30 of book value

sharePrice
45
bookValuePerShare
30
sharesOutstanding
2000000
StepCalculationResult
Price-to-book ratiosharePrice / bookValuePerShare1.5
Market capitalisationsharePrice * sharesOutstanding90000000.0
Total book equitybookValuePerShare * sharesOutstanding60000000.0

Result: At 45 per share and 30 of book value the P/B is 1.5, market capitalisation is 90000000.0 and total book equity is 60000000.0.

Example 2: A share trading below book value

sharePrice
18
bookValuePerShare
30
sharesOutstanding
1000000
StepCalculationResult
Price-to-book ratiosharePrice / bookValuePerShare0.6
Market capitalisationsharePrice * sharesOutstanding18000000.0
Total book equitybookValuePerShare * sharesOutstanding30000000.0

Result: The 18 price against 30 of book value gives a P/B of 0.6, with market capitalisation of 18000000.0 and total book equity of 30000000.0.

Example 3: A growth company with a large premium

sharePrice
120
bookValuePerShare
40
sharesOutstanding
500000
StepCalculationResult
Price-to-book ratiosharePrice / bookValuePerShare3.0
Market capitalisationsharePrice * sharesOutstanding60000000.0
Total book equitybookValuePerShare * sharesOutstanding20000000.0

Result: With a 120 price and 40 of book value the P/B is 3.0, market capitalisation is 60000000.0 and total book equity is 20000000.0.

Calculator

Price-to-book ratio

1.5

Market capitalisation
$90,000,000.00
Total book equity
$60,000,000.00

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the Price To Book Ratio calculator page.

Common Mistakes

  • Mixing a current price with stale accounts

    A share price taken today and a book value from a balance sheet published two years ago produce a ratio that compares two different companies in all but name. Book equity changes every quarter through retained profit, losses and new share issues. Always use the most recent published figure and note its date so the calculation can be repeated and defended later.

  • Ignoring negative book equity

    When a company has accumulated losses or has bought back more shares than its equity is worth, book value per share can be negative. Dividing a positive price by a negative number gives a meaningless multiple that should be discarded, not reported. In that situation analysts turn to other measures such as enterprise value to sales or price to tangible book.

  • Treating a ratio below one as automatically cheap

    A low multiple can be a genuine bargain, but it can also be a value trap: the market may be anticipating write-downs, losses or a business in structural decline. Accounting equity is a historical cost figure and may overstate what assets are really worth today. Investigate earnings quality, debt and the reason for the discount before calling the shares undervalued.

  • Comparing ratios across different sectors

    Banks and insurers carry large financial asset bases and often trade near book value, while software and consultancy firms hold few tangible assets and routinely trade at several times book. That difference reflects business models rather than relative value. Compare a company only with peers facing similar accounting rules and asset structures, and never infer expensiveness from a cross-sector ranking.

  • Using mismatched share counts

    The per-share and company-wide views agree only if the same number of shares is used throughout. A count that includes treasury shares, a different share class or a figure from before a split will make market capitalisation and book equity disagree. Run the cross-check of market capitalisation over book equity against the per-share ratio to expose the error at once.

  • Confusing book value with tangible or liquidation value

    Book value includes goodwill and other intangibles that may be worth far less in a sale, so it is not the same as the cash shareholders would receive if the company were wound up. Price-to-tangible-book removes those items and gives a stricter measure. State which version is in use, especially for an acquisition-heavy business where goodwill can be a large share of equity.

FAQ

What does the price-to-book ratio measure?

It compares the market price of a share with the accounting value of the net assets behind that share. Divide the share price by book value per share and you get a multiple: 45 over 30 is 1.5, meaning investors pay one and a half times recorded equity. It is a valuation multiple, not a percentage and not a measure of profit.

What does a ratio below one mean?

It means the shares trade for less than the net asset value recorded in the accounts. That can signal a bargain, but it can equally signal that the market expects losses, write-downs or a decline in the business. A price of 18 against book value of 30 gives 0.6. Investigate the reason for the discount before assuming the stock is cheap.

Why do growth companies trade well above book value?

Because their most valuable assets are often developed internally, such as software, brands, patents and expertise, and accounting rules do not record those as assets. The market is paying for future earning power that the balance sheet cannot show. A high ratio is therefore common in technology and branded consumer businesses and does not by itself indicate overvaluation.

How do I find book value per share?

Take shareholders' equity from the latest balance sheet and divide it by the number of ordinary shares in issue. Many data providers publish the figure directly, but confirm that it uses the same share count you use elsewhere. In the worked case equity works out to 30 for each of 2,000,000 shares, giving total book equity of 60000000.0.

How do market capitalisation and book equity relate to the ratio?

Market capitalisation is the share price times the shares outstanding, here 90000000.0, while book equity is book value per share times the same count, here 60000000.0. Dividing the first by the second gives exactly the same ratio as dividing the two per-share figures. The share count cancels, which makes the relationship a useful cross-check.

When is the price-to-book ratio not useful?

It is not meaningful when shareholders' equity is negative, because the ratio then divides by a negative number. It is also weak for asset-light service businesses and for companies whose assets are recorded at historical cost far below their current value. In those cases use earnings-based or cash-flow-based multiples instead, and compare only with genuine sector peers.

References