CCalclabhub

Business · 44 calculations

Marketing

How To Calculate The Click Through Rate

Click-through rate answers a simple question in advertising and email marketing: of all the times an advert or link was shown, how often was it clicked? It divides the number of clicks by the number of impressions and presents the result as a percentage. With 500 clicks from 25,000 impressions the rate is 2 per cent, and the same division scales up, doubles and runs backwards to set a target.

Last updated

Quick Answer

Click-through rate = clicks / impressions, expressed as a percentage

CTR
Click-through rate — the share of impressions that earn a click
C
Number of clicks recorded over the chosen period
I
Number of impressions recorded over the same period

Divide the number of clicks by the number of impressions. With 500 clicks from 25,000 impressions the raw ratio is 0.02, shown as 2 per cent. Doubling the clicks to 1,000 lifts the rate to 0.04, or 4 per cent; reaching 5 per cent across 25,000 impressions needs 1,250.0 clicks, and a 4 per cent rate from 500 clicks needs 12,500.0 impressions.

What Is The Click Through Rate?

Click-through rate, usually shortened to CTR, is the number of clicks divided by the number of impressions, presented as a percentage. With 500 clicks from 25,000 impressions the calculation is 500 over 25,000, giving 0.02, which is displayed as 2 per cent. The result describes a rate of occurrence rather than a count: on average, two of every hundred showings earned a click. Because it is a ratio, a small campaign and a large one can be compared on the same scale. That comparability is the reason the measure is reported almost everywhere adverts or links are displayed.

An impression is one instance of an advert or link being displayed, whether or not anyone noticed or acted on it. A click is one recorded activation of that display. Both counts must come from the same period and the same audience definition, otherwise the ratio loses its meaning. Platforms differ in how they record a viewable impression and in how they treat duplicate clicks, so the figure is only as trustworthy as the tracking behind it. Keeping the definitions constant matters more than the arithmetic, which is simply a division.

The relationship with clicks is directly proportional when impressions stay fixed. Hold the impression count at 25,000 and double the clicks from 500 to 1,000: the rate doubles from 0.02 to 0.04, or from 2 per cent to 4 per cent. Halve the clicks to 250 and the rate halves to 1 per cent. A rising click-through rate can therefore mean that the creative became more appealing, or simply that fewer impressions were served to less interested viewers. Diagnosing which of the two moved is the first step before changing a campaign.

Impressions move the rate in the opposite direction. If clicks remain at 500 but impressions fall from 25,000 to 12,500, the rate doubles to 4 per cent, because the same clicks were earned from half the exposure. If impressions rise to 50,000 while clicks stay at 500, the rate halves to 1 per cent. This is why a narrow, highly targeted campaign often shows a healthier rate than a broad one with far greater reach. A high rate is not automatically a better campaign, since it may be buying far fewer total visits.

The division also runs backwards. Multiply the impression count by a target rate to find the clicks required: 25,000 impressions at a target of 5 per cent needs 25,000 times 0.05, which is 1,250 clicks. Divide the click count by a target rate to find the impression volume required: 500 clicks at a target of 4 per cent needs 500 over 0.04, or 12,500 impressions. Both rearrangements turn the metric from a report into a planning tool. They let you set a realistic goal before a campaign starts and check whether it was met afterwards.

A handy way to read the figure is to rescale it to a thousand impressions. A rate of 2 per cent means 20 clicks for every thousand showings, because 0.02 times 1,000 is 20. The original case of 500 clicks from 25,000 impressions gives the same answer: 25,000 is 25 thousands, and 500 over 25 is 20. This rescaling makes the number easier to hold in your head and links directly to cost per thousand impressions. It is the same ratio viewed through a different unit, not a new calculation.

Click-through rate sits between two money measures. Cost per thousand impressions prices the opportunity to be seen, while cost per click prices the visit that follows. The three connect neatly: a cost per thousand impressions of 5 with a click-through rate of 2 per cent produces 20 clicks per thousand, so the cost per click is 5 over 20, or 0.25. Change any one of the three and at least one other must move. Reading them together reveals whether a campaign is expensive to show, poor at attracting clicks, or both.

The measure also stops at the click. Conversion rate describes what happens afterwards, such as the share of clicks that become purchases. A 2 per cent click-through rate combined with a 10 per cent conversion rate means about 0.2 per cent of impressions become customers, since 0.02 times 0.10 is 0.002. Traffic that never converts is expensive at any price, so a high click-through rate cannot rescue a weak landing page. Treat the figure as the top of a funnel rather than a measure of business results.

There is no universal good click-through rate. A search advert answering a specific query can reasonably exceed 5 per cent, while a display banner might be considered healthy near 0.5 per cent. Benchmarks vary by channel, placement, device and intent, so compare like with like before drawing conclusions. The average also hides weaker segments: one placement can look excellent while another wastes its budget. The calculator returns four linked outputs — a rate of 0.02, a doubled-click rate of 0.04, 1,250.0 clicks for 5 per cent and 12,500.0 impressions for 4 per cent — to be read with cost and conversion data.

Formula

CTR = C / I

Formula page →

Clicks divided by impressions. With C equal to 500 and I equal to 25,000 the raw ratio is 0.02, which the renderer displays as 2 per cent.

SymbolMeaning
CNumber of clicks
INumber of impressions

CTR (double clicks) = 2 × C / I

Formula page →

Doubling clicks while holding impressions fixed doubles the rate. With C of 500 and I of 25,000 the result is 0.04, shown as 4 per cent.

SymbolMeaning
CNumber of clicks
INumber of impressions

C = I × T, and I = C / T

Formula page →

Rearrangements that convert a target rate into the required clicks or impressions. At I of 25,000 and a target of 0.05 the answer is 1,250.0 clicks; at C of 500 and a target of 0.04 it is 12,500.0 impressions.

SymbolMeaning
CRequired clicks
IImpressions
TTarget rate as a decimal

How To Calculate The Click Through Rate

  1. 1

    Count the clicks

    Take the valid click count reported for the advert or link, here 500. Exclude duplicate or invalid activity where the platform allows it, and confirm that the figure covers the same dates as the impressions. A click is usually counted when the advert is activated, regardless of what the visitor does next.

  2. 2

    Count the impressions

    Record how many times the advert was shown over that same window, here 25,000. Check whether the platform reports served or viewable impressions, because the two can differ substantially. Whatever definition you choose, keep it consistent across the campaigns you intend to compare.

  3. 3

    Divide clicks by impressions

    Compute the raw ratio as clicks over impressions. With 500 over 25,000 the answer is 0.02, which the display layer shows as 2 per cent. The stored value stays a decimal between zero and one; multiplying it by a hundred again would turn 2 per cent into 200 per cent.

  4. 4

    Check the doubled-click case

    Hold impressions at 25,000 and double the clicks to 1,000: the rate becomes 0.04, displayed as 4 per cent. This confirms the directly proportional link between clicks and the rate, and it gives a quick sense of how much traffic would be needed to lift performance.

  5. 5

    Work backwards from a target

    Multiply impressions by a target rate to find the clicks it would take: 25,000 times 0.05 is 1,250.0. Divide clicks by a target rate to find the reach it would take: 500 over 0.04 is 12,500.0. Use these rearrangements to set goals rather than simply to describe what already happened.

Examples

Example 1: The worked default — 500 clicks from 25,000 impressions

clicks
500
impressions
25000
StepCalculationResult
Clicks divided by impressionsclicks / impressions = 500 / 250000.02
Clicks per thousand impressions0.02 × 100020
Rate at double the clicksclicks * 2 / impressions = 1000 / 250000.04
Click-through rateclicks / impressions = 500 / 250000.02

Result: With 500 clicks from 25,000 impressions the click-through rate is 0.02, or 2 per cent; that is 20 clicks per thousand impressions. Doubling the clicks to 1,000 lifts the rate to 0.04, displayed as 4 per cent.

Example 2: Doubling the clicks on the same reach

clicks
1000
impressions
25000
StepCalculationResult
Clicks after the improvementclicks1000
Click-through rateclicks / impressions = 1000 / 250000.04

Result: At 1,000 clicks from 25,000 impressions the click-through rate is 0.04, or 4 per cent — exactly double the 2 per cent baseline, because the impression count did not change.

Example 3: Planning for a five per cent target

clicks
1250
impressions
25000
StepCalculationResult
Target rate as a decimal5 per cent0.05
Clicks needed for the targetimpressions * 0.05 = 25000 * 0.051250.0

Result: A 5 per cent goal on 25,000 impressions requires 1250.0 clicks, which is 2.5 times the 500-click baseline. If those clicks never arrived, the campaign would fall short of its stated target.

Calculator

Click-through rate

2.00%

Click-through rate at double the clicks
4.00%
Clicks needed for a 5 per cent rate
1,250
Impressions needed for a 4 per cent rate
12,500

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the The Click Through Rate calculator page.

Common Mistakes

  • Treating the raw decimal and the percentage as the same number

    The calculator stores 0.02 for a 2 per cent rate, because the renderer applies the multiplication. Writing an expression that also multiplies by a hundred turns the displayed figure into 200 per cent. Keep the stored value between zero and one and let the display layer do the conversion.

  • Mismatching the click and impression periods

    A full month of impressions divided by two weeks of clicks overstates the rate, while the reverse understates it. Align both counts to identical dates before dividing. The arithmetic stays correct, so the error is easy to miss until someone checks the reporting window.

  • Mixing served and viewable impressions

    Served impressions count requests while viewable ones require the advert to have actually appeared. Switching definitions between campaigns makes their rates incomparable and can flatter the broader measure. Choose one definition and keep it for every comparison.

  • Ignoring invalid and duplicate clicks

    Accidental taps, bots and repeat clicks from one user all inflate the numerator and lift the reported rate. Filter what the platform allows and remember that even genuine clicks vary in intent. A high rate built on low-quality traffic is not a real improvement.

  • Assuming a high rate means a successful campaign

    Click-through rate stops at the visit and says nothing about purchases, order value or margin. A campaign with a 4 per cent rate and no conversions can lose more money than one at 1 per cent that sells reliably. Read the figure beside conversion rate and revenue before praising it.

  • Comparing benchmarks across unlike channels

    A search advert answering a specific query and a passive display banner compete for very different kinds of attention, so their typical rates differ by an order of magnitude. Compare like with like in terms of channel, placement and intent. A number that looks poor in one context may be excellent in another.

FAQ

What is a good click-through rate?

There is no universal figure. A targeted search advert can reasonably exceed 5 per cent, while a display banner around 0.5 per cent may be perfectly healthy. The right benchmark depends on channel, placement, device and the intent of the audience, so compare your result against similar campaigns rather than against a single industry number.

What does a click-through rate of 2 per cent actually mean?

It means two out of every hundred impressions earned a click. In the worked case 500 clicks came from 25,000 impressions, giving a raw ratio of 0.02 that is displayed as 2 per cent. Rescaled, that is 20 clicks for every thousand impressions. It is an average, so individual placements will do better or worse.

Why did my click-through rate fall when my impressions grew?

Clicks are the numerator and impressions the denominator, so if clicks do not grow as fast as impressions the rate falls. With clicks fixed at 500, going from 25,000 to 50,000 impressions halves the rate from 2 per cent to 1 per cent. Broader targeting often brings in viewers less likely to click, which produces the same effect.

How do I work out the clicks needed for a target rate?

Multiply the planned impressions by the target rate written as a decimal. For 25,000 impressions at 5 per cent the calculation is 25,000 times 0.05, giving 1,250.0 clicks. If you instead know the clicks and want the reach, divide clicks by the target rate: 500 over 0.04 gives 12,500.0 impressions.

How is click-through rate different from CPC and CPM?

Click-through rate is a share with no currency attached, while cost per click prices a visit and cost per thousand impressions prices visibility. They link through clicks per thousand: a CPM of 5 with a 2 per cent rate yields 20 clicks per thousand, and therefore a cost per click of 0.25. Each metric describes a different stage of the same funnel.

Can a high click-through rate ever be misleading?

Yes. It can reflect a narrow audience served very few impressions, or clicks from people who never buy. It can also hide weak placements behind a healthy blended average. Always read the figure alongside total volume, conversion rate and cost before treating a rising rate as a better result.

References