CCalclabhub

Business · 44 calculations

Marketing

How To Calculate The Cost Per Thousand Impressions

Cost per thousand impressions, often written CPM, answers how much it costs to put an advert in front of a thousand viewers. It divides total spend by the number of thousands of impressions delivered, giving a price that can be compared across campaigns of very different sizes. With a spend of 500 and 100,000 impressions the figure is 5.0, and the same division doubles with spend, falls with reach and runs backwards to set a target.

Last updated

Quick Answer

CPM = ad spend / (impressions / 1000)

CPM
Cost per thousand impressions — the price of one thousand views
S
Total advertising spend over the chosen period
I
Number of impressions over the same period

Divide the advertising spend by the number of thousands of impressions. Spending 500 for 100,000 impressions gives a CPM of 5.0. Doubling the spend to 1,000 at the same reach raises it to 10.0; holding a CPM of 5 across that reach needs 500.0 of spend, and reaching a CPM of 10 from 500 of spend needs 50,000.0 impressions.

What Is The Cost Per Thousand Impressions?

Cost per thousand impressions, almost always shortened to CPM, is the price of one thousand views of an advert. It is calculated by dividing total spend by the number of thousands of impressions delivered. With a spend of 500 and 100,000 impressions, the number of thousands is 100, and 500 over 100 gives 5.0. The letter M comes from the Roman numeral for one thousand, which is why the measure is sometimes called cost per mille. The result is an average price per block of a thousand views, not what any single impression cost.

The measure exists to compare the price of reach. Two campaigns can spend very different amounts and deliver very different audiences, yet cost per thousand impressions puts both on a common scale. A campaign costing 500 for 100,000 impressions and one costing 2,000 for 500,000 impressions both work out at 5.0, revealing that the larger buy was not actually cheaper per view. Without this normalisation, a big budget merely looks expensive because the total is large. Comparing campaigns on this basis is far more informative than comparing headline spend.

The first practical step is to convert raw impressions into thousands, because the measure is defined per thousand rather than per view. Divide the impression count by 1,000: 100,000 becomes 100. This conversion is the whole reason the helper in the calculator exists, and getting it wrong is the most common source of a figure that is a thousand times too large or too small. Once impressions are expressed in thousands, the remaining calculation is a simple division of spend by that count. Keeping the two steps distinct makes the result easy to audit.

Cost per thousand impressions is directly proportional to spend when reach is held constant. Keep the audience at 100,000 impressions, which is 100 thousands, and raise spend from 500 to 1,000: the CPM doubles from 5.0 to 10.0. Cut spend to 250 and it halves to 2.5. A rising CPM with unchanged reach means the same viewers cost more to reach, perhaps because of increased auction competition or a narrower target. Diagnosing whether spend or reach moved is essential before concluding that a campaign became less efficient.

Reach moves the figure in the opposite direction. Hold spend at 500 and double impressions from 100,000 to 200,000, or 100 to 200 thousands: the CPM halves from 5.0 to 2.5. Halve impressions to 50,000 and it doubles to 10.0. This is why a broad, cheap placement can show a very low CPM while delivering viewers who never engage. A low price per thousand is only good news if the extra reach is worth having, which is a question the metric cannot answer on its own.

The division runs backwards in both directions. Multiply the thousands of impressions by a target CPM to find the spend required: 100 thousands at a target of 5 needs 500.0. Divide spend by a target CPM and multiply by 1,000 to find the reach required: 500 at a target of 10 needs 50,000.0 impressions. Both rearrangements support planning rather than reporting. They let a manager set a ceiling for a test, or calculate how much reach a fixed budget can buy at a price the auction is likely to deliver.

The measure prices visibility, not action, and that is both its strength and its limitation. Cost per click prices the visit that follows, and the two connect through click-through rate. A CPM of 5.0 with a click-through rate of 2 per cent delivers 20 clicks per thousand impressions, because 0.02 times 1,000 is 20, so the cost per click is 5 over 20, or 0.25. Change the click-through rate and the same CPM produces a very different price per visit. Reading the measures together separates a cheap audience from a cheap click.

Not every impression is equal. A served impression means an advert was requested, while a viewable impression means a reasonable share of it actually appeared on screen. Platforms may charge on either basis, so a CPM calculated from served impressions can look flattering next to one based on viewable ones. Fraudulent and duplicate displays inflate the denominator and depress the reported price. Keep the counting rule consistent across campaigns, and check what the platform actually bills for before treating two CPM figures as directly comparable.

There is no single good CPM. A premium video placement can command a figure many times higher than a text banner, because the audience and format differ. Channel, geography, device and season all move the benchmark, so compare like with like and judge the price against what the reach is worth. The average also hides variation between placements within one campaign. The calculator returns four linked outputs — a CPM of 5.0, a doubled-spend CPM of 10.0, a spend of 500.0 for a CPM of 5 and a reach of 50,000.0 for a CPM of 10 — to be read alongside engagement and conversion data.

Formula

CPM = S / (I / 1000)

Formula page →

Spend divided by impressions expressed in thousands. With S of 500 and I of 100,000 the thousands figure is 100 and the result is 5.0.

SymbolMeaning
STotal ad spend
INumber of impressions

CPM (double spend) = 2 × S / (I / 1000)

Formula page →

Doubling spend with reach fixed doubles the CPM. With S of 500 and I of 100,000 the result is 10.0.

SymbolMeaning
STotal ad spend
INumber of impressions

S = (I / 1000) × T, and I = S / T × 1000

Formula page →

Two rearrangements for planning. At 100 thousands of impressions and a target of 5 the spend is 500.0; at 500 of spend and a target of 10 the reach is 50,000.0 impressions.

SymbolMeaning
SRequired spend
IRequired impressions
TTarget CPM

How To Calculate The Cost Per Thousand Impressions

  1. 1

    Total the advertising spend

    Add every cost charged to the campaign over the period, including media and any platform or management fees you choose to include. In the worked case the spend is 500. Decide what is inside the figure before comparing campaigns, since excluding a fee can make one look cheaper without changing the reach it bought.

  2. 2

    Count the impressions

    Take the impression count reported for the same dates, here 100,000. Check whether the platform counts served or viewable impressions, and remove invalid or duplicate displays where it allows. Match the reporting window to the spend exactly, because a part-month against a full month distorts the result even when the division is correct.

  3. 3

    Convert impressions to thousands

    Divide the impression count by 1,000. Here 100,000 divided by 1,000 is 100, so the campaign delivered 100 thousands of impressions. This helper step is where the mille in cost per mille is applied. Skipping it produces a number a thousand times too small, so make the conversion explicit before dividing.

  4. 4

    Divide spend by the thousands

    Compute CPM as spend over the thousands of impressions. With 500 over 100 the answer is 5.0, so each thousand views cost five currency units on average. This is the primary output of the calculator. Keep the raw figure and compare it with what the reach is actually worth to the business.

  5. 5

    Work backwards from a target

    Multiply the thousands of impressions by a target CPM to find the spend needed: 100 times 5 is 500.0. Divide spend by a target CPM and multiply by 1,000 to find the reach needed: 500 over 10 times 1,000 is 50,000.0. Use these rearrangements to set a budget ceiling or a reach goal before the campaign launches.

Examples

Example 1: The worked default — 500 spend for 100,000 impressions

adSpend
500
impressions
100000
StepCalculationResult
Convert impressions to thousandsimpressions / 1000 = 100000 / 1000100
Divide spend by the thousandsadSpend / thousandImpressions = 500 / 1005.0
Cost per thousand impressionsadSpend / thousandImpressions5.0

Result: Spending 500 for 100,000 impressions gives a CPM of 5.0. Doubling the spend to 1,000 at the same reach raises it to 10.0, and a target CPM of 5 on this reach needs 500.0 of spend.

Example 2: Doubling the spend on the same reach

adSpend
1000
impressions
100000
StepCalculationResult
Cost per thousand impressionsadSpend / thousandImpressions = 1000 / 10010.0
CPM at double the spendadSpend * 2 / thousandImpressions = 2000 / 10020.0

Result: With 1,000 of spend on 100,000 impressions the CPM is 10.0; doubling the spend again to 2,000 at that same reach would push it to 20.0.

Example 3: Finding the reach for a ten CPM target

adSpend
500
impressions
50000
StepCalculationResult
Impressions in thousandsimpressions / 1000 = 50000 / 100050
CPM achievedadSpend / thousandImpressions = 500 / 5010.0
Impressions needed for a CPM of 10adSpend / 10 * 1000 = 500 / 10 * 100050000.0

Result: With 500 of spend the CPM reaches 10.0 once impressions fall to 50000.0, half the original reach of 100,000.

Calculator

Cost per thousand impressions

$5.00

CPM at double the spend
$10.00
Spend for a CPM of 5
$500.00
Impressions for a CPM of 10
50,000

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the The Cost Per Thousand Impressions calculator page.

Common Mistakes

  • Forgetting to divide impressions by a thousand

    The measure is per thousand views, so using the raw impression count as the denominator gives a figure a thousand times too small. With 100,000 impressions the divisor must be 100, not 100,000. Always perform the conversion first and sanity-check that the result looks like a plausible price per block of views.

  • Mismatching spend and impression periods

    A full month of spend divided by two weeks of impressions overstates the CPM, and the reverse understates it. Align both figures to identical dates before dividing. Because the arithmetic itself is correct, the mistake survives until someone checks the reporting window.

  • Mixing served and viewable impressions

    Served impressions count requests whereas viewable ones require the advert to have appeared on screen. A CPM based on served impressions will look lower than one based on viewable ones for the same spend. Keep one definition across all comparisons and check which basis the platform bills on.

  • Counting invalid and duplicate displays

    Bots, repeated loads and fraudulent placements inflate the denominator and depress the reported price. A suspiciously cheap CPM often traces back to low-quality inventory rather than a good deal. Filter what the platform allows and treat a price that looks too good as a prompt to investigate.

  • Treating a low CPM as proof of a good campaign

    The metric prices visibility and says nothing about whether anyone engaged or bought. A placement with a CPM of 0.5 that nobody notices is worse than one at 10 that converts reliably. Read the figure beside click-through rate, conversion rate and revenue before judging the campaign.

  • Comparing CPM across unlike formats

    A premium video placement and a text banner deliver very different audiences, so their typical prices differ sharply. Channel, geography, device and season all shift the benchmark. Compare like with like and judge the price against the value of the reach rather than against a number from another campaign.

FAQ

What is a good cost per thousand impressions?

It depends on the format and audience. A premium video placement can legitimately cost many times more than a display banner, because the attention it buys is worth more. Compare against similar campaigns in the same channel and judge the price by what the reach earns, not by a single universal benchmark.

What does a CPM of 5.0 actually mean?

It means five currency units were paid for each thousand views. In the worked case 500 of spend bought 100,000 impressions, which is 100 thousands, and 500 over 100 gives 5.0. It is an average across the whole campaign, so particular placements will have cost more or less per thousand.

Why did my CPM rise when I increased the budget?

If reach did not grow as quickly as spend, the price per thousand rose. Holding impressions at 100,000, raising spend from 500 to 1,000 doubles the CPM from 5.0 to 10.0. A higher budget can push you into more expensive auctions or narrower audiences, so check whether the extra money actually bought extra impressions.

How do I work out the spend for a target CPM?

Express the reach in thousands and multiply by the target CPM. For 100,000 impressions, which is 100 thousands, at a target of 5 the calculation is 100 times 5, giving 500.0. If the auction cannot deliver at that price, the real CPM will be higher and the effective reach lower than planned.

How is CPM different from cost per click?

CPM prices the chance to be seen, while cost per click prices the visit that follows. They link through click-through rate: a CPM of 5 with a 2 per cent rate yields 20 clicks per thousand impressions, so the cost per click is 5 over 20, or 0.25. An advert can be cheap to show yet expensive to click.

Why convert impressions into thousands first?

Because cost per mille is defined per thousand views, the denominator must be the count divided by 1,000. With 100,000 impressions the divisor is 100. Skipping that step yields a number a thousand times too small and makes the result meaningless, so treat the conversion as an explicit step in any calculation.

References