CCalclabhub

Health · 36 calculators

Body Weight Change Calculator

Body weight change is simply current weight minus previous weight, but the raw kilograms rarely tell the whole story. Expressing that change as a share of the starting weight makes it comparable between people of different sizes, while dividing by the number of weeks gives an average rate. This page works through the arithmetic and the sign convention that makes a loss come out negative.

Last updated

Weight change

-5.00%

Change in kilograms
-4
Average weekly rate
-0.5
Five-per-cent target weight
76

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

delta_w = w_1 - w_0, p = delta_w / w_0, rate = delta_w / weeks, target_5 = 0.95 w_0

w_0
Previous or starting weight
w_1
Current weight
delta_w
Absolute change in weight
weeks
Number of weeks between the two weigh-ins

How to check the result by hand

  1. 1

    Record the two weigh-ins

    Write down the previous weight and the current weight in the same units, ideally kilograms, and note how many weeks separate them. Weigh yourself under identical conditions each time: same scale, same time of day, similar clothing and after using the bathroom. Consistent inputs matter more than an extra decimal place, because day-to-day fluctuation can exceed the change you are trying to measure.

  2. 2

    Subtract to find the absolute change

    Take the current weight away from nothing else; the change is current minus previous. For 76 kilograms after starting at 80, the change is 76 minus 80, which is -4.0 kilograms. Keep the negative sign, as it is the only thing distinguishing a loss from a gain at this stage.

  3. 3

    Divide by the starting weight for the percentage

    Divide the absolute change by the previous weight, not the current one. Here -4 divided by 80 gives -0.05, which the display shows as minus 5 per cent. The result is stored as a plain fraction, so never multiply by 100 in the expression; the rendering layer does that conversion once, at the end.

  4. 4

    Divide by the number of weeks for the rate

    Spread the total change across the elapsed time by dividing by the number of weeks. Four kilograms lost over eight weeks gives -4 divided by 8, or -0.5 kilograms per week. Treat this as an average over the whole interval rather than a promise about each individual week.

  5. 5

    Compute the five-per-cent target weight

    Multiply the previous weight by 0.95 to find the weight at which a 5 per cent loss has been achieved. From a starting point of 80 kilograms that is 80 times 0.95, giving 76.0 kilograms. Compare this target with the current weight to see whether the milestone has been reached, and remember it is a convention rather than personal medical advice.

Common Questions

How does the Body Weight Change Calculator work?

Subtract the previous weight from the current weight, then divide by the previous weight to get the fractional change; the display layer shows this as a percentage. For a fall from 80 to 76 kilograms over eight weeks the change is -4.0 kilograms, the relative change is -0.05 (a loss of 5 per cent), the average rate is -0.5 kilograms per week, and a five-per-cent target from 80 kilograms is 76.0 kilograms. A negative result means weight was lost.

What do I need to enter in the Body Weight Change Calculator?

It takes 3 inputs: Previous weight, Current weight, Weeks between weigh-ins. Fields that expect a unit say so next to the label.

Where does Weight change come from?

It comes from delta_w = w_1 - w_0 — current weight minus previous weight. A negative result signifies a loss, a positive result a gain. This helper value feeds all three other outputs.

What is the most common mistake with the Body Weight Change Calculator?

Dividing by the current weight instead of the previous weight. The percentage change must use the starting weight as its denominator, because that is the baseline against which the change occurred. Dividing -4 by 76 rather than by 80 gives -0.0526 instead of -0.05, a small-looking difference that grows large for bigger changes and makes results from different starting weights incomparable.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Body Weight Change page.