CCalclabhub

Health · 36 calculators

Cholesterol Ratio Calculator

A lipid panel reports several numbers, and the total-to-HDL cholesterol ratio combines two of them into a single figure by simple division. This page explains that arithmetic, along with non-HDL cholesterol and the HDL share, using worked numbers. It is general formula education only and is not personal medical advice.

Last updated

Total-to-HDL cholesterol ratio

4

Non-HDL cholesterol
150
Ratio if HDL were halved
8
HDL share of total
25.00%

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Cholesterol ratio = Total cholesterol / HDL cholesterol

Total
Total cholesterol, the numerator
HDL
HDL cholesterol, the denominator
R
The resulting total-to-HDL ratio
S
HDL share of total, a proportion

How to check the result by hand

  1. 1

    Read the two numbers from the same panel

    Take total cholesterol and HDL cholesterol from the same report so that they share a sample and a unit. The arithmetic assumes the figures are directly comparable concentrations; mixing results from different days, laboratories or unit conventions makes the division meaningless. Write them down clearly before doing anything else, noting which figure is the total and which is the HDL.

  2. 2

    Compute the total-to-HDL ratio

    Divide the total by the HDL. With the default figures this is 200 divided by 50, which gives 4.0. The answer has no units because the concentration units cancel, and it is conventionally reported to one or two decimal places. Keep more precision in intermediate work if you intend to use the ratio in a further calculation.

  3. 3

    Find non-HDL cholesterol

    Subtract the HDL value from the total to get the non-HDL figure. Using the defaults, 200 minus 50 gives 150.0. This is a simple difference in the same concentration units, and it rises when the total rises or the HDL falls. It is an alternate summary of the same two inputs, calculated by subtraction instead of division.

  4. 4

    Find the HDL share of the total

    Divide HDL by the total to express how much of the whole is HDL. With the defaults, 50 divided by 200 gives 0.25, which a display layer shows as 25 per cent. Keep this as a proportion of 0.25 in the working; the multiplication by one hundred belongs to presentation, not to the formula, so do not build it into the arithmetic.

  5. 5

    Check how sensitive the ratio is to HDL

    Because HDL is the denominator, halving it at a fixed total doubles the ratio. Halve the default HDL of 50 to 25 and divide again: 200 divided by 25 gives 8.0, exactly twice the original 4.0. This is a useful mental check on any result, and it shows why a small change in the denominator can produce a large change in the ratio.

Common Questions

How does the Cholesterol Ratio Calculator work?

Divide total cholesterol by HDL cholesterol to get the ratio. Subtract HDL from total to get non-HDL cholesterol, and divide HDL by total to get the HDL share as a proportion. With a total of 200 and HDL of 50, the ratio is 4.0, non-HDL is 150.0, the HDL share is 0.25 (shown as 25 per cent), and halving HDL would double the ratio to 8.0.

What do I need to enter in the Cholesterol Ratio Calculator?

It takes 2 inputs: Total cholesterol, HDL cholesterol. Fields that expect a unit say so next to the label.

Where does Total-to-HDL cholesterol ratio come from?

It comes from R = Total / HDL — divide total cholesterol by HDL cholesterol. Both figures are concentrations in the same units, so the ratio itself carries no units.

What is the most common mistake with the Cholesterol Ratio Calculator?

Dividing HDL by total instead of total by HDL. The ratio puts the total in the numerator and HDL in the denominator. Reversing them gives the HDL share rather than the ratio, a completely different number that moves in the opposite direction. Read the labels carefully and check that the answer is greater than one whenever the total exceeds HDL.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Cholesterol Ratio page.