Science · 63 calculators
Elastic Potential Energy Calculator
Squashing or stretching a spring stores energy that can be released later, and this page shows exactly how much. The calculation turns a spring constant and a displacement into the stored elastic potential energy, the restoring force, and what happens to both when the displacement is doubled.
Last updated
Elastic potential energy
2.25
- Restoring force
- 30
- Energy at double displacement
- 9
- Force at double displacement
- 60
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
E = (1/2)kx^2
- E
- Elastic potential energy stored in the spring, in joules (J)
- k
- Spring constant, a measure of stiffness, in newtons per metre (N/m)
- x
- Displacement from the unstretched position, in metres (m)
- F
- Restoring force exerted by the spring, in newtons (N)
How to check the result by hand
- 1
Identify the spring constant
Find the spring constant k and confirm it is quoted in newtons per metre. In the worked case it is 200 N/m, meaning the spring pushes back with 200 newtons for every metre of displacement. If the value is given in newtons per centimetre, convert it first, because using the wrong unit here will flow through the whole calculation and spoil both the energy and the force.
- 2
Convert the displacement to metres
Express the displacement x from the unstretched position in metres. The worked spring is displaced by 0.15 m, which is fifteen centimetres written in base units. This conversion is the single most important habit with this formula: because x is squared, a unit slip is magnified enormously, so always write the displacement in metres before doing anything else.
- 3
Square the displacement
Work out x squared, the displacement multiplied by itself. For 0.15 m this gives 0.0225 square metres. Squaring makes the sign irrelevant, so a compression of 0.15 m produces the same value as a stretch of 0.15 m. Keeping this intermediate figure explicit helps you see where the quadratic behaviour comes from and makes it easy to reuse for the doubled-displacement case.
- 4
Apply the energy and force formulas
Multiply half the spring constant by the squared displacement to get the stored energy: 0.5 times 200 times 0.0225 gives 2.25 J. Separately, multiply the spring constant by the displacement for the restoring force: 200 times 0.15 gives 30.0 N. Energy and force are related but different quantities, so keep the two results labelled clearly rather than treating them as interchangeable.
- 5
Check the doubled displacement
Replace x by 2x to see the scaling rule in action. At 0.30 m the force is 200 times 0.30, or 60.0 N, exactly double the original 30.0 N. The energy is 0.5 times 200 times 0.30 times 0.30, which is 9.0 J, exactly four times the original 2.25 J. If your doubled energy is not four times the first value, the displacement was not squared correctly.
Common Questions
How does the Elastic Potential Energy Calculator work?
Elastic potential energy is half the spring constant multiplied by the square of the displacement from equilibrium. The restoring force at that displacement is the spring constant times the displacement. With k = 200 N/m and x = 0.15 m the stored energy is 2.25 J and the force is 30.0 N; doubling the displacement gives 9.0 J and 60.0 N.
What do I need to enter in the Elastic Potential Energy Calculator?
It takes 2 inputs: Spring constant (N/m), Displacement (m). Fields that expect a unit say so next to the label.
Where does Elastic potential energy come from?
It comes from E = (1/2) k x^2 — half the spring constant times the square of the displacement from equilibrium. Because x is squared, doubling the displacement quadruples the stored energy.
What is the most common mistake with the Elastic Potential Energy Calculator?
Leaving the displacement in centimetres. The spring constant is in newtons per metre, so displacement must be in metres. Entering 15 instead of 0.15 makes the squared term one hundred times larger in the force-free sense and ten thousand times too large in the energy, because the displacement is squared. Convert every length to metres before substituting.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Elastic Potential Energy page.
