Math · 75 calculators
Volume Of A Frustum Calculator
A frustum is what remains when the pointed tip of a cone is sliced away by a plane parallel to its base, leaving two circular faces of different sizes. This page explains how to calculate the volume of a frustum from the two radii and the perpendicular height, and shows how the slant height, the lateral surface area and the volume of the original uncut cone follow from the same three inputs. All working uses a large radius of 5, a small radius of 3 and a height of 4.
Last updated
Frustum volume
205.2507
- Lateral surface area
- 112.397
- Slant height
- 4.4721
- Full cone volume
- 261.7994
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
V = (πh/3)(R² + Rr + r²); slant height s = √(h² + (R − r)²); lateral area A = π(R + r)s
- R
- Radius of the larger circular face, in ordinary length units
- r
- Radius of the smaller circular face, in the same units
- h
- Perpendicular height between the two circular faces
- V
- Volume of the frustum, in cubic units
How to check the result by hand
- 1
Identify the radii and the perpendicular height
Write down the radius of the larger circular face R, the radius of the smaller face r, and the perpendicular distance h between the two faces. For the worked example these are 5, 3 and 4. Do not confuse the perpendicular height with the slant height, which runs down the outside of the shape and is longer. If a problem supplies diameters, halve each one first. Convert all three lengths to the same unit before substituting.
- 2
Build the sum of squares of the radii
Square the large radius, multiply the two radii together, and square the small radius, then add the three results. With R = 5 and r = 3 the terms are 25, 15 and 9, giving a total of 49. This bracket is the only place where the two radii enter the volume formula, and it is symmetric, so the order of the faces does not matter. Keep the full value rather than approximating it, because it is multiplied by π and by the height in the next step.
- 3
Apply the frustum volume formula
Multiply π by the height and by the bracket, then divide by three: V = π × 4 × 49 / 3 = 205.25072003453315 cubic units. An equivalent one-line substitution is (π × 4 / 3)(5² + 5 × 3 + 3²). Carry enough digits through the working so that the final value is not degraded by premature rounding. The answer must be positive and, for these inputs, must lie between the cone volume 104.71975511965978 and the cylinder volume 314.1592653589793.
- 4
Find the slant height and the lateral surface area
Compute the slant height from s = √(h² + (R − r)²). Here the radius difference is 2, so s = √(16 + 4) = √20 = 4.47213595499958. The lateral surface area is then π(R + r)s = π × 8 × 4.47213595499958 = 112.39703569665163 square units. Remember that this covers only the curved side; add the two circular ends if the question asks for the total surface area. The slant height should exceed the perpendicular height whenever the radii differ.
- 5
Compute the full cone as a comparison and check
For reference, extend the sloped sides to their apex. Similar triangles give a full height of hR/(R − r) = 4 × 5 / 2 = 10, and the corresponding full cone volume is π × 5² × 10 / 3 = 261.79938779914943. This value is larger than the frustum volume and is a comparison quantity, not the answer to the frustum question. The difference of about 56.55 cubic units is the small cone that was cut away. Finally, sanity check the units: cubic for volume, square for area, and ordinary length for each height.
Common Questions
How does the Volume Of A Frustum Calculator work?
The volume is one third of π times the height times the sum of the large radius squared, the product of the two radii and the small radius squared. With R = 5, r = 3 and h = 4 the three radius terms are 25, 15 and 9, which add to 49, giving a frustum volume of 205.25072003453315 cubic units. The slant height is 4.47213595499958 and the lateral surface area is 112.39703569665163. Extending the sloped sides to their apex gives a full cone of height 10 and volume 261.79938779914943, a useful comparison rather than the answer to the question.
What do I need to enter in the Volume Of A Frustum Calculator?
It takes 3 inputs: Large radius, Small radius, Perpendicular height. Fields that expect a unit say so next to the label.
Where does Frustum volume come from?
It comes from V = (πh/3)(R² + Rr + r²) — take one third of π times the perpendicular height, and multiply by the sum of the large radius squared, the product of the radii and the small radius squared. The three terms replace the single radius squared used for a full cone.
What is the most common mistake with the Volume Of A Frustum Calculator?
Averaging the two end areas instead of using the radius sum. Multiplying the mean of πR² and πr² by the height gives 68π = 213.62830044410595 here, not 205.25072003453315. Cross-sectional area grows with the square of the radius, so a plain linear average of the ends misses the middle term Rr. Always use (πh/3)(R² + Rr + r²) rather than a shortcut average.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Volume Of A Frustum page.
