CCalclabhub

Science · 63 calculators

Gravitational Acceleration Calculator

Gravitational acceleration is the rate at which a freely falling object gains speed near a planet's surface. This calculation turns the mass and radius of a spherical body into the single number that governs falling, weight and nearly every other motion in a gravitational field.

Last updated

Gravitational acceleration

9.8195

Acceleration at twice the radius
2.4549
Acceleration at half the radius
39.2781
Weight of a 75 kg mass
736.4649

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

g = G x M / r^2

g
Gravitational acceleration at the surface
G
Newton's gravitational constant, 6.674e-11
M
Mass of the attracting body
r
Radius measured from the body's centre

How to check the result by hand

  1. 1

    Write down the mass and radius in SI units

    Record the body's mass M in kilograms and its radius r in metres, measured from the centre rather than the surface. For the Earth these are 5.972e24 kilograms and 6,371,000 metres. Using kilometres for the radius without converting is the single most common source of a wildly wrong answer.

  2. 2

    Square the radius

    Multiply the radius by itself to obtain r squared. For the Earth example, 6,371,000 squared is 4.0589641e13 square metres. The square is not optional: gravity weakens with the square of distance, so omitting it would make the answer wrong by a factor of millions.

  3. 3

    Multiply the constant by the mass

    Compute G times M using the gravitational constant 6.674e-11. With a mass of 5.972e24, the product is 3.9857128e14. This combined quantity is sometimes called the standard gravitational parameter and is known far more precisely than either factor alone.

  4. 4

    Divide to obtain the acceleration

    Divide the product by the squared radius. Here 3.9857128e14 divided by 4.0589641e13 gives 9.819532032815959 metres per second squared, which rounds to about 9.82. Check the magnitude: a result near ten for an Earth-like body is plausible, while one near 0.01 or 1000 signals a unit error.

  5. 5

    Scale the radius or convert to weight

    Reuse the result for related questions. Scaling the radius gives 2.4548830082039896 at twice the radius and 39.278128131263834 at half, and multiplying by a 75 kilogram mass gives a weight of 736.464902461197 newtons. Each is the same base calculation viewed from a different angle.

Common Questions

How does the Gravitational Acceleration Calculator work?

Divide the product of the gravitational constant and the body's mass by the square of its radius. For an idealised Earth with a mass of 5.972e24 kilograms and a radius of 6,371,000 metres the result is 9.819532032815959 metres per second squared. Doubling the radius quarters that figure, halving it multiplies it by four, and a 75 kilogram mass weighs 736.464902461197 newtons there.

What do I need to enter in the Gravitational Acceleration Calculator?

It takes 2 inputs: Mass of the body, Radius of the body. Fields that expect a unit say so next to the label.

Where does Gravitational acceleration come from?

It comes from g = G x M / r^2 — the acceleration at the surface of a spherical body equals the gravitational constant times its mass divided by the square of its radius. The mass of the falling object cancels out, so the result depends only on the body being stood on.

What is the most common mistake with the Gravitational Acceleration Calculator?

Using the diameter instead of the radius. The formula needs the distance from the centre, which is half the diameter. Entering a diameter doubles r and divides the answer by four, turning 9.819532032815959 into roughly 2.45.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Gravitational Acceleration page.