CCalclabhub

Math · 61 calculators

Volume Of A Hemisphere Calculator

A hemisphere is exactly half a sphere, cut through its centre, and its volume is two-thirds of pi times the radius cubed. This page explains where that formula comes from, how it differs from the sphere and from the surface-area formulas, and how doubling the radius changes the answer, with three worked examples.

Last updated

Volume

452.3893

Curved surface area
226.1947
Total surface area
339.292
Great-circle area
113.0973

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

V = (2/3) × π × r³

r
The radius of the hemisphere, measured from the centre of the flat base to the top of the dome
V
The volume enclosed by the curved surface and the flat base, in cubic units
π
The constant pi, approximately 3.141592653589793

How to check the result by hand

  1. 1

    Find the radius of the hemisphere

    Take the distance from the centre of the flat base to the top of the dome. If the problem gives a diameter, halve it, because using the diameter in place of the radius would multiply the volume by eight. In the worked example the radius is 6 and the corresponding square is 36 and cube is 216.

  2. 2

    Cube the radius for the volume

    Compute r cubed by multiplying the radius by itself twice. For radius 6 that is 6 times 6 times 6, equal to 216. This cubing is the reason volume responds so strongly to the radius, and it is the step most often skipped by people who square instead.

  3. 3

    Apply the two-thirds factor

    Multiply the cube by pi and then by two-thirds, giving two pi r cubed over three. With a cube of 216 this is two times pi times 216 divided by 3, which evaluates to 452.3893421169302 cubic units. Multiplying by the fraction last keeps the arithmetic easy to follow.

  4. 4

    Work out the curved and base areas

    For surface area, square the radius to get 36. The curved dome is two pi times 36, or 226.1946710584651, and the flat great-circle base is pi times 36, or 113.09733552923255. These are square units, not cubic units, and the base area is exactly one third of the curved area.

  5. 5

    Add the base for the total surface area

    Sum the curved area and the flat base, which simplifies to three pi r squared. For radius 6 the total is 339.29200658769764 square units. Remember that this total is only relevant to a closed solid; an open bowl that has no material across its mouth still has that flat disk as its bottom.

Common Questions

How does the Volume Of A Hemisphere Calculator work?

Cube the radius, multiply by pi and by two-thirds. For a radius of 6 the cube is 216 and the volume is 452.3893421169302 cubic units. The curved surface alone is 2πr², or 226.1946710584651, while the total surface including the flat circular base is 3πr², or 339.29200658769764. The great circle at the base has area πr², about 113.09733552923255.

What do I need to enter in the Volume Of A Hemisphere Calculator?

It takes 1 inputs: Radius. Fields that expect a unit say so next to the label.

Where does Volume come from?

It comes from V = (2/3) × π × r³ — half of the sphere volume, four-thirds pi r cubed. Cube the radius first, then multiply by pi and by two-thirds. With radius 6 this gives 452.3893421169302 cubic units.

What is the most common mistake with the Volume Of A Hemisphere Calculator?

Using four-thirds pi r cubed instead of two-thirds. Four-thirds pi r cubed is the volume of a whole sphere. A hemisphere is half of that, so the factor must be two-thirds. Using the sphere formula doubles the correct answer and is easy to miss because the rest of the expression looks identical.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Volume Of A Hemisphere page.