Everyday Life · 69 calculators
Landscaping Cost Calculator
A landscaping estimate reduces a garden project to three numbers: the area to be treated, a rate for each square foot, and a fixed fee for delivery or setup. This page shows how those inputs combine into a total, how to express the result per hundred square feet, and what happens to the bill when the area doubles.
Last updated
Total landscaping cost
$3,300.00
- Material cost
- $3,000.00
- Cost per hundred square feet
- $275.00
- Cost for double the area
- $6,300.00
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Total = area x rate per square foot + fixed fee
- A
- Area to be landscaped, in square feet
- R
- Rate charged per square foot
- F
- Fixed fee added once to the project
- T
- Total landscaping cost
How to check the result by hand
- 1
Measure the area in square feet
Work out the ground to be treated and express it in square feet. For a rectangle multiply length by width; for an irregular shape split it into rectangles and add them. In the worked example the area is 1200 square feet. If your plan uses square metres, convert before continuing, since the rate is quoted per square foot and mixing units will badly distort the estimate.
- 2
Compute the material cost
Multiply the area by the rate per square foot: 1200 x 2.5 = 3000. This is the part of the estimate that pays for materials and scales with the ground covered. Keep the full precision of the product for later steps. If the supplier sells in whole bags or pallets, note that the real order may need rounding up after the arithmetic is done.
- 3
Add the fixed fee once
Add the fixed charge to the material cost: 3000 + 300 = 3300. The fee covers delivery, setup or a minimum call-out and is added after multiplication, not folded into the rate. This total is the primary result of the calculation and the figure to use when comparing one supplier's quote with another's.
- 4
Express the result per hundred square feet
Divide the total by the area in hundreds: 1200 square feet is 12 hundreds, so 3300 / 12 = 275 per hundred square feet. This includes the fixed fee and therefore exceeds the bare material rate. It is a convenient shorthand for comparing bulk prices, and it decreases as the area grows because the fixed charge is spread more widely.
- 5
Rescale for a larger area
To price double the ground, double only the area term: 1200 x 2 x 2.5 + 300 = 6000 + 300 = 6300. Notice the total of 6300 is less than twice 3300, precisely because the fixed fee was not doubled. Use the same approach for any other size: recompute the material portion, then add the same single fee.
Common Questions
How does the Landscaping Cost Calculator work?
Multiply the area in square feet by the rate per square foot to get the material portion, then add the fixed fee once. The cost per hundred square feet divides the whole total by the area measured in hundreds. With an area of 1200, a rate of 2.5 and a fixed fee of 300, the material cost is 3000, the total is 3300, and the per-hundred rate is 275. Doubling the area doubles the material part but leaves the fixed fee unchanged, giving a total of 6300.
What do I need to enter in the Landscaping Cost Calculator?
It takes 3 inputs: Area in square feet, Rate per square foot, Fixed fee. Fields that expect a unit say so next to the label.
Where does Total landscaping cost come from?
It comes from T = A x R + F — multiply the area by the rate per square foot to get the material cost, then add the fixed fee once. The fee is not multiplied by the area.
What is the most common mistake with the Landscaping Cost Calculator?
Charging the fixed fee per square foot. The fixed fee is a one-off addition, not a rate applied across the whole area. Multiplying it by the square footage inflates the estimate enormously. In the worked case the correct fee is 300 once, giving 3300, not 300 for each of the 1200 square feet.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Landscaping Cost page.
