CCalclabhub

Science · 63 calculators

Lorentz Factor Calculator

The Lorentz factor tells you how strongly time, length and momentum are altered for something moving at a significant fraction of the speed of light. It depends only on the speed, expressed as a fraction of light speed, and it stays almost exactly one at everyday speeds before rising sharply towards light speed. This page shows how to work it out and how the same number gives the time dilation and length contraction factors.

Last updated

Lorentz factor (gamma)

1.25

Time dilation factor
1.25
Length contraction factor
0.8
Lorentz factor at half the speed
1.0483

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

gamma = 1 / sqrt(1 - beta^2), where beta = v / c

gamma
The Lorentz factor, a dimensionless multiplier
beta
Speed as a fraction of the speed of light, between zero and one
v
Speed of the object, in metres per second
c
Speed of light in a vacuum, about three hundred million metres per second

How to check the result by hand

  1. 1

    Express the speed as a fraction of light speed

    Divide the speed of the object by the speed of light to obtain beta, a plain number between zero and one. If the speed is already given as a percentage of light speed, divide it by one hundred first: sixty per cent becomes zero point six. Do not append a percent sign to the input, because the calculator expects an ordinary decimal fraction and treats sixty as a speed sixty times that of light, which has no physical meaning for a massive object.

  2. 2

    Square the speed fraction

    Multiply beta by itself. With the default speed fraction of zero point six this gives zero point three six. Squaring is what makes the effect so weak at low speeds and so dramatic near light speed: at one tenth of light speed the square is only one hundredth, whereas at nine tenths it is eighty-one hundredths. Keep this squared value to hand, because it is the quantity that is subtracted from one in the next step.

  3. 3

    Subtract from one and take the square root

    Work out one minus beta squared, then take the positive square root. At the default speed, one minus zero point three six is zero point six four, and its square root is exactly zero point eight. This square root is itself the length contraction factor: a moving object measures zero point eight of its rest length along the direction of travel. As the speed rises, this term shrinks towards zero, which is the mathematical source of the rise in gamma.

  4. 4

    Take the reciprocal to find gamma

    Divide one by the value from the previous step. One divided by zero point eight is one point two five, so the Lorentz factor at six tenths of light speed is one point two five. This is the primary result and it is always at least one. Check the direction of the answer: a larger speed fraction must give a larger gamma, so if your result has fallen below one, you have inverted the fraction the wrong way round.

  5. 5

    Work out the related factors

    Use the same numbers for the other outputs. The time dilation factor equals gamma exactly, so it is also one point two five at the default speed; this is not a coincidence but the same physical multiplier applied to a clock. The length contraction factor is zero point eight, the square root term from step three. Halving the speed to zero point three gives a factor of one point zero four eight two eight four eight three six seven two one nine one eight two, much closer to one and a useful check on the trend.

Common Questions

How does the Lorentz Factor Calculator work?

Express the speed as a fraction of light speed, square it, subtract that from one, take the square root and then take the reciprocal. At six tenths of light speed the result is one point two five. The time dilation factor is the same number, while the length contraction factor is its reciprocal, zero point eight.

What do I need to enter in the Lorentz Factor Calculator?

It takes 1 inputs: Speed as a fraction of light speed. Fields that expect a unit say so next to the label.

Where does Lorentz factor (gamma) come from?

It comes from gamma = 1 / sqrt(1 - beta^2) — the primary relation. Express the speed as a fraction of light speed, square it, subtract from one, take the square root and invert. The result is a dimensionless multiplier.

What is the most common mistake with the Lorentz Factor Calculator?

Entering a percentage instead of a fraction. The input is an ordinary decimal between zero and one, so sixty per cent of light speed is entered as zero point six. Entering sixty, or adding a percent unit, makes beta far larger than one and produces a negative value under the square root.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Lorentz Factor page.