CCalclabhub

Science · 51 calculators

Mach Number Calculator

The Mach number tells you how fast something is moving relative to the speed of sound in the medium around it. Instead of quoting a raw speed, it gives a dimensionless ratio, so a Mach 2 aircraft is travelling at twice the local speed of sound whether it is near sea level or high in the atmosphere. This page shows how to compute that ratio, how to classify the resulting flow regime, and how to convert the underlying speed into other units.

Last updated

Mach number

2

Speed (m/s)
680
Speed (km/h)
2,448
Speed of sound (km/h)
1,224

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

M = v / a

M
Mach number (dimensionless)
v
Speed of the object, in metres per second
a
Local speed of sound, in the same units as v

How to check the result by hand

  1. 1

    Put the speed in consistent units

    Express the object's speed in metres per second so it matches the usual value for the speed of sound. If your speed is quoted in kilometres per hour, divide it by 3.6 first. The Mach number only comes out right when the numerator and denominator share the same units, because the units must cancel to leave a pure number.

  2. 2

    Find the local speed of sound

    Use the speed of sound for the medium and conditions at the object's location, not a remembered constant. In air near room temperature it is roughly 340 metres per second, but it falls as the air gets colder. If you know the absolute temperature, the ideal-gas relation gives a good estimate; otherwise take the value from a standard atmosphere or an air-data instrument.

  3. 3

    Divide speed by the speed of sound

    Compute M = v / a. With a speed of 680 metres per second and a speed of sound of 340 metres per second the result is 680 divided by 340, which is exactly 2.0. Because the ratio is dimensionless there is no unit to attach; just report the number, often written with the Mach prefix as Mach 2.

  4. 4

    Classify the flow regime

    Compare the result with the regime boundaries. Below about 0.8 the motion is subsonic, around 1 it is transonic, above about 1.2 it is supersonic, and above roughly 5 it is hypersonic. At Mach 2 the flow is firmly supersonic, so shock waves and compressibility effects are expected and the sound barrier has been crossed.

  5. 5

    Convert the speed for reporting if needed

    Multiply any speed in metres per second by 3.6 to state it in kilometres per hour. In the worked case 680 metres per second becomes 2,448 kilometres per hour and the 340-metre-per-second speed of sound becomes 1,224 kilometres per hour. These conversions change only the units, so the Mach number itself stays at 2.0.

Common Questions

How does the Mach Number Calculator work?

Divide the object's speed v by the local speed of sound a. A result below 1 is subsonic, exactly 1 is sonic, and above 1 is supersonic. Because both speeds must be measured in the same units, the ratio has no units of its own. With a speed of 680 metres per second and a speed of sound of 340 metres per second, the Mach number is 2.0.

What do I need to enter in the Mach Number Calculator?

It takes 2 inputs: Object speed (metres per second), Speed of sound (metres per second). Fields that expect a unit say so next to the label.

Where does Mach number come from?

It comes from M = v / a — the defining relation. Divide the object's speed by the local speed of sound. Both quantities must be expressed in the same units so that the result is a pure number.

What is the most common mistake with the Mach Number Calculator?

Mixing speed units. Dividing a speed in kilometres per hour by a speed of sound in metres per second produces a number 3.6 times too large. Always convert one to match the other before dividing, and remember that multiplying by 3.6 changes only the units, never the Mach number itself.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Mach Number page.