Everyday Life · 57 calculators
Moving Cost Calculator
A DIY moving cost adds up three things: the truck rental, any paid labour and a charge for the miles driven. Splitting the total into those components shows where the money actually goes, while dividing by the hours worked puts the effort in context.
Last updated
Total moving cost
$324.00
- Labour cost
- $180.00
- Mileage cost
- $24.00
- Effective cost per hour
- $81.00
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Total = truckRental + (hours x hourlyRate) + (miles x mileageRate) | cost per hour = Total / hours
- truckRental
- The fixed cost of hiring the truck or van
- hours
- Number of hours of paid help
- hourlyRate
- What each helper is paid per hour
- miles
- Distance driven to deliver the goods
- mileageRate
- Charge per mile driven
How to check the result by hand
- 1
Note the fixed truck rental
Start with the hire cost, which is 120 here and does not change with hours or distance. Confirm what the rental covers — insurance, mileage allowance and any fuel deposit — so that the same item is not charged again elsewhere in the estimate.
- 2
Work out the paid labour
Multiply the hours by the hourly rate: 4 x 45 = 180.0. If several helpers work at different rates, calculate each one separately and add the results, and be clear about whether the hours are for the whole crew or for each individual person.
- 3
Calculate the mileage charge
Multiply the distance by the per-mile rate: 30 x 0.8 = 24.0. Use the actual route length rather than a straight-line guess, and check whether the rate already includes fuel so that petrol is not counted a second time.
- 4
Add the three components
Sum the rental, labour and mileage: 120 + 180 + 24 = 324.0. This is the core cost of the move. Keep the components visible rather than collapsing them, because the breakdown is what lets you see where a quote can be reduced.
- 5
Divide by hours for the effective hourly figure
Take the total and divide by the hours worked: 324.0 / 4 = 81.0. This exceeds the 45 wage because each hour also carries 30 of truck cost and 6 of mileage cost. Compare this figure, not just the wage, when weighing paid help against doing the work yourself. Keep it alongside the total, because a lower per-hour cost does not automatically mean a smaller bill.
Common Questions
How does the Moving Cost Calculator work?
Multiply the hours by the hourly rate to get labour, multiply the miles by the per-mile rate to get the mileage charge, then add both to the truck rental. With a 120 rental, four hours at 45 an hour and thirty miles at 0.8 a mile, labour is 180.0, mileage is 24.0 and the total is 324.0. Dividing by four hours gives an effective cost of 81.0 per hour.
What do I need to enter in the Moving Cost Calculator?
It takes 5 inputs: Truck rental, Hours of paid labour, Labour rate per hour, Miles driven, Mileage rate per mile. Fields that expect a unit say so next to the label.
Where does Total moving cost come from?
It comes from L = hours x hourlyRate — multiply the number of hours by the rate paid per hour. For four hours at 45 an hour this gives 180.0, the largest single component of the worked move.
What is the most common mistake with the Moving Cost Calculator?
Quoting the hourly wage as the cost per hour. The 45 wage is only part of the picture. Each hour also carries a share of the truck rental and the mileage charge, so the true effective figure here is 81.0, almost double the wage.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate A Moving Cost page.
