Everyday Life · 57 calculators
Road Trip Cost Calculator
A road trip cost collects into three buckets: fuel, tolls and a place to sleep. The calculation turns a distance and a fuel efficiency figure into the gallons you will burn, prices those gallons, and then layers on road charges and the nights you spend away from home. Dividing the total by the distance gives a cost per mile, which is the handiest number for comparing one route or one vehicle with another.
Last updated
Total trip cost
$335.00
- Gallons needed
- 20
- Fuel cost
- $70.00
- Lodging cost
- $240.00
- Cost per mile
- 0.67
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Total = (distance / efficiency) x price + tolls + nights x nightly rate
- d
- Trip distance in miles
- e
- Fuel efficiency in miles per gallon
- p
- Price of fuel per gallon
- t
- Tolls and road charges for the route
- n
- Number of nights away from home
- r
- Hotel rate per night
How to check the result by hand
- 1
Put distance and efficiency in matching units
Write down the total distance in miles and the vehicle's consumption in miles per gallon. If your efficiency is quoted in litres or kilometres, convert it first, otherwise the division in the next step is meaningless. For the worked trip the figures are 500 miles and 25 miles per gallon, which are already compatible.
- 2
Work out the gallons required
Divide the distance by the efficiency: 500 divided by 25 gives 20.0 gallons. This single intermediate value drives both the fuel cost and, through it, the total. Keep the full figure rather than rounding it at this stage, particularly when the division produces a long decimal.
- 3
Price the fuel
Multiply the gallons by the price per gallon. With 20.0 gallons at 3.5 per gallon the fuel cost is 70.0. Check the direction of the result: a higher price or a lower efficiency should push this figure up, while a more economical car should bring it down.
- 4
Add tolls and lodging
Work out lodging as nights times the nightly rate, here 2 times 120 giving 240.0, then add the tolls of 25. Adding those to the 70.0 of fuel gives a total of 335.0. Keeping the components separate in your notes makes it obvious which assumption to revisit if the total looks too high.
- 5
Divide by distance for the cost per mile
Take the total of 335.0 and divide by the 500 miles to obtain 0.67 per mile. This last number is the one to use when comparing options. Remember that it will fall if the same tolls and hotel nights are spread over a longer drive, so do not assume a bigger number always means worse value.
Common Questions
How does the Road Trip Cost Calculator work?
Divide the distance by the fuel efficiency in miles per gallon to get the gallons needed. Multiply those gallons by the price per gallon for the fuel cost, then add tolls and the product of nights and the nightly hotel rate. The sum is the trip total; dividing it by the distance gives the cost per mile.
What do I need to enter in the Road Trip Cost Calculator?
It takes 6 inputs: Trip distance (miles), Fuel efficiency (miles per gallon), Fuel price per gallon, Tolls and road charges, Nights away from home, Hotel rate per night. Fields that expect a unit say so next to the label.
Where does Total trip cost come from?
It comes from G = d / e — divide the distance by the fuel efficiency. Both must use the same distance unit and the efficiency must be expressed as distance per gallon, not the other way round.
What is the most common mistake with the Road Trip Cost Calculator?
Mixing distance and efficiency units. If the distance is in kilometres but the efficiency is in miles per gallon, the gallons figure is wrong before you begin. Convert everything to one consistent set of units first, and remember that kilometres per litre is not the same quantity as miles per gallon.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate A Road Trip Cost page.
