Geometry
Area and diagonal from the side
The interior area is the side squared, while the corner-to-corner diagonal follows from Pythagoras on half the square.
Last updated
The Formula
A = s² and d = s × √2
The interior area is the side squared, while the corner-to-corner diagonal follows from Pythagoras on half the square.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| s | Side length | length | The same side length used for the perimeter. |
| A | Area | length² | The flat space enclosed, measured in square units. |
| d | Diagonal | length | The corner-to-corner distance, about 1.414 times the side. |
What Each Symbol Means
slength
Side length
The same side length used for the perimeter.
Alength²
Area
The flat space enclosed, measured in square units.
dlength
Diagonal
The corner-to-corner distance, about 1.414 times the side.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate the perimeter of a square page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate The Perimeter Of A Square, filed under Math. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Area and diagonal from the side?
The formula for Area and diagonal from the side is A = s² and d = s × √2. The interior area is the side squared, while the corner-to-corner diagonal follows from Pythagoras on half the square.
What units should I use with Area and diagonal from the side?
Substitute s in length, A in length², d in length. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Area and diagonal from the side?
Using two sides instead of four. Two times the side gives only half the perimeter, 18.0 when s = 9. This mistake often happens when someone pictures just a pair of opposite edges. Count all four sides before multiplying, or remember that the full boundary is twice the halfway distance.