Length
Millimetres to centimetres
Ten millimetres make one centimetre, so 100 millimetres is exactly 10.0 centimetres and no inch factor is involved.
Last updated
The Formula
cm = mm / 10
Ten millimetres make one centimetre, so 100 millimetres is exactly 10.0 centimetres and no inch factor is involved.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| mm | Length in millimetres | millimetres | The same input used for the inch conversion. |
| cm | Length in centimetres | centimetres | One tenth of the millimetre value. |
What Each Symbol Means
mmmillimetres
Length in millimetres
The same input used for the inch conversion.
cmcentimetres
Length in centimetres
One tenth of the millimetre value.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to convert millimeters to inches page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Convert Millimeters To Inches, filed under Unit Conversion. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Millimetres to centimetres?
The formula for Millimetres to centimetres is cm = mm / 10. Ten millimetres make one centimetre, so 100 millimetres is exactly 10.0 centimetres and no inch factor is involved.
What units should I use with Millimetres to centimetres?
Substitute mm in millimetres, cm in centimetres. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Millimetres to centimetres?
Mixing centimetres with millimetres. A centimetre is ten millimetres, not a hundred, so the centimetre output divides the input by ten. Entering 10 for a one-centimetre length when the field expects millimetres produces a result ten times too small. Convert every part of a measurement into millimetres before applying the inches factor.