Length
Millimetres to inches
Divide by the exact 25.4 millimetres per inch, which is the same as multiplying by 0.03937007874015748. With 100 millimetres the result is 3.937007874015748 inches.
Last updated
The Formula
in = mm / 25.4
Divide by the exact 25.4 millimetres per inch, which is the same as multiplying by 0.03937007874015748. With 100 millimetres the result is 3.937007874015748 inches.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| mm | Length in millimetres | millimetres | The input measurement, one thousandth of a metre per unit. |
| in | Length in inches | inches | The same physical length after conversion, kept at full precision. |
What Each Symbol Means
mmmillimetres
Length in millimetres
The input measurement, one thousandth of a metre per unit.
ininches
Length in inches
The same physical length after conversion, kept at full precision.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to convert millimeters to inches page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Convert Millimeters To Inches, filed under Unit Conversion. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Millimetres to inches?
The formula for Millimetres to inches is in = mm / 25.4. Divide by the exact 25.4 millimetres per inch, which is the same as multiplying by 0.03937007874015748. With 100 millimetres the result is 3.937007874015748 inches.
What units should I use with Millimetres to inches?
Substitute mm in millimetres, in in inches. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Millimetres to inches?
Multiplying by 25.4 instead of dividing. The number 25.4 is millimetres per inch, so it is the divisor when the input is already in millimetres. Multiplying 100 by 25.4 gives 2540, an absurd result for a ten-centimetre length. Multiply by the reciprocal 0.03937007874015748, or divide by 25.4, and the answer is 3.937007874015748 inches.