CCalclabhub

Optics

Refractive index from the two speeds

The defining ratio. Divide the speed of light in a vacuum by the speed of light in the material. Both quantities are speeds, so the result is dimensionless and at least one for ordinary materials.

The Formula

n = c / v

The defining ratio. Divide the speed of light in a vacuum by the speed of light in the material. Both quantities are speeds, so the result is dimensionless and at least one for ordinary materials.

SymbolMeaning
cSpeed of light in vacuum
vSpeed of light in material
nRefractive index

What Each Symbol Means

cm/s

Speed of light in vacuum

Very nearly 300,000,000 metres per second; use the same units as v.

vm/s

Speed of light in material

The phase velocity inside the medium, lower than c in ordinary matter.

ndimensionless

Refractive index

The dimensionless ratio c/v; never below one for conventional materials.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate refractive index page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate Refractive Index, filed under Science. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Refractive index from the two speeds?

The formula for Refractive index from the two speeds is n = c / v. The defining ratio. Divide the speed of light in a vacuum by the speed of light in the material. Both quantities are speeds, so the result is dimensionless and at least one for ordinary materials.

What does each symbol in Refractive index from the two speeds stand for?

c is speed of light in vacuum; v is speed of light in material; n is refractive index.

What units should I use with Refractive index from the two speeds?

Substitute c in m/s, v in m/s, n in dimensionless. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Refractive index from the two speeds?

Dividing the speeds the wrong way round. The refractive index is vacuum speed divided by material speed, not the other way about. Inverting the fraction for the worked values gives 0.6666666666666666, a number below one that cannot be an ordinary refractive index. An index below one is a clear signal to check the order of the division.