CCalclabhub

Optics

Speed fraction and speed reduction

The speed fraction is the reciprocal of the refractive index, the share of the vacuum speed that light reaches in the medium. One minus this fraction gives the speed reduction, which is 0.33333333333333337 in the worked case.

The Formula

s = v / c = 1 / n

The speed fraction is the reciprocal of the refractive index, the share of the vacuum speed that light reaches in the medium. One minus this fraction gives the speed reduction, which is 0.33333333333333337 in the worked case.

SymbolMeaning
sSpeed fraction
vSpeed of light in material
cSpeed of light in vacuum

What Each Symbol Means

sdimensionless

Speed fraction

Proportion of the vacuum speed achieved in the material; reciprocal of n.

vm/s

Speed of light in material

The reduced speed measured inside the medium.

cm/s

Speed of light in vacuum

The reference speed used as the denominator.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate refractive index page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate Refractive Index, filed under Science. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Speed fraction and speed reduction?

The formula for Speed fraction and speed reduction is s = v / c = 1 / n. The speed fraction is the reciprocal of the refractive index, the share of the vacuum speed that light reaches in the medium. One minus this fraction gives the speed reduction, which is 0.33333333333333337 in the worked case.

What does each symbol in Speed fraction and speed reduction stand for?

s is speed fraction; v is speed of light in material; c is speed of light in vacuum.

What units should I use with Speed fraction and speed reduction?

Substitute s in dimensionless, v in m/s, c in m/s. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Speed fraction and speed reduction?

Assuming frequency changes at the boundary. Frequency is fixed by the source and does not change when light enters a new medium. It is speed and wavelength that adjust. If a calculation shows a frequency ratio other than 1.0, something has been inverted. Confusing frequency with wavelength here also leads to the wrong account of why colour is unchanged by refraction.