Investing
How To Calculate Book Value Per Share
Book value per share reduces a company's balance sheet to a single per-share figure: the accounting value of each share of shareholders' equity. It asks what each share would be worth if the recorded assets were realised at their book amounts and every liability were settled. The calculation divides total equity by the number of shares outstanding, and the same two inputs also drive a doubling scenario, a per-thousand-share rescaling and the price-to-book multiple.
Last updated
Quick Answer
BVPS = Total shareholders' equity / Shares outstanding
- E
- Total shareholders' equity attributable to ordinary shareholders
- S
- Number of shares outstanding
- BVPS
- Book value per share
- P
- Current market price per share
Divide total shareholders' equity by the number of shares outstanding to get the accounting value of one share. With 5,000,000 of equity and 250,000 shares, book value per share is 20.0. Doubling equity doubles it to 40.0, each block of a thousand shares is backed by 20,000.0, and a market price of 40 implies a price-to-book multiple of 2.0.
What Is Book Value Per Share?
Book value per share is the portion of a company's shareholders' equity that belongs to each share in issue. It is found by dividing total equity by the number of shares outstanding. If a firm reports 5,000,000 of equity and has 250,000 shares in the market, each share carries 20.0 of accounting value. The figure is sometimes called the book value of a share, and it is a balance-sheet measure rather than a market price. It tells you what the accounts say a share is backed by, not what a buyer will pay for it today. Because it rests on recorded figures, it changes only when the balance sheet or the share count changes.
The idea follows directly from the accounting identity that assets minus liabilities equal equity. Everything on the balance sheet is carried at historical cost or a prescribed revaluation, so book value is an accounting construct and not a market appraisal. Assets such as property may sit at what was paid years ago, while brands and other internally generated intangibles may not appear at all. Book value per share therefore measures recorded capital, and investors treat it as a conservative floor only when those recorded values are close to realisable values.
The denominator must be the number of shares actually outstanding, not the number authorised or merely issued. Authorised shares are a ceiling set in the company's constitution, and issued shares may include treasury stock that the firm has bought back and no longer has in the market. Using the wrong count scales the answer in the opposite direction: count too many shares and book value per share falls; count too few and it rises. Always take the figure from the latest balance sheet or share register and keep it on the same date as the equity figure.
The measure is directly proportional to equity and inversely proportional to the share count. Doubling equity while holding shares fixed doubles the figure, from 20.0 to 40.0 with the worked numbers, because the same number of shares now backs twice the recorded capital. Doubling the share count instead would halve it. This linearity is useful for quick mental checks: if a company issues a large block of new shares, you can estimate the dilution to book value per share before a revised figure is published. The relationship holds exactly because there are no nonlinear terms in the division.
Rescaling the denominator is often convenient. Dividing equity by the number of thousands of shares gives the capital backing each block of a thousand shares. With 250,000 shares there are 250 such blocks, so 5,000,000 of equity works out at 20,000.0 per thousand shares. This is the same 20.0 per share expressed on a larger unit and is handy when comparing companies with very different share counts or when quoting a figure in a more readable size. It adds no new information, because it is simply the per-share result multiplied by a thousand.
Comparing the per-share book value with the market price gives the price-to-book ratio: market price divided by book value per share. At a market price of 40 and a book value per share of 20.0, the ratio is 2.0, meaning the market pays twice the recorded accounting value. A ratio above one usually reflects expectations of future growth or assets not fully captured in the accounts; a ratio below one can signal distress or simply a business whose value lies in earnings rather than recorded assets. The multiple is meaningful only when both numbers use the same share basis and the same reporting date.
Book value per share sits alongside earnings per share as a per-share statistic, but the two answer different questions. Earnings per share measures a flow of profit over a period, while book value per share measures a stock of capital at a point in time. A company can report strong earnings yet a low book value if it pays out most profits as dividends, and a high book value with weak earnings if its assets earn little. Reading the two together is more informative than either alone, and the same equity figure feeds related measures such as return on equity and the debt-to-capital ratio.
The figure has clear limits. It relies on historical accounting values that may be far from what assets would fetch in a sale, and it ignores off-balance-sheet obligations and the franchise value of a business. It can be negative when accumulated losses exceed paid-in capital, in which case the per-share result is also negative and the price-to-book ratio stops being meaningful. Share buybacks can shrink the denominator and lift the figure without adding any new capital, while large write-downs can cut it sharply. Treat it as one lens on value rather than a verdict.
In practice, book value per share is most useful for asset-heavy businesses such as banks, insurers and property companies, where recorded values are closer to market values. For software or other asset-light firms it is a poor anchor because the valuable assets are people and ideas that do not appear on the balance sheet. A sound habit is to compute the figure, compare it with the current market price and with peers in the same sector, and ask what the gap says about expectations. Used that way, a simple division becomes a quick screen rather than a precise valuation.
Formula
BVPS = E / S
Formula page →Divide the equity attributable to ordinary shareholders by the number of shares outstanding. Both figures must come from the same reporting date and be expressed in the same currency.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| E | Total shareholders' equity | currency | Assets minus liabilities attributable to ordinary shareholders, taken from the balance sheet. |
| S | Shares outstanding | shares | The count of shares actually held by investors, excluding treasury stock. |
Equity per thousand = E / (S / 1000)
Formula page →Rescale the per-share result to blocks of a thousand shares. With 250,000 shares there are 250 blocks, so 5,000,000 of equity gives 20,000.0 per thousand.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| E | Total shareholders' equity | currency | The same balance-sheet equity used in the main formula. |
| S / 1000 | Number of thousand-share blocks | blocks | Shares outstanding divided by one thousand, the rescaled denominator. |
P/B = P / BVPS
Formula page →Market price per share divided by book value per share. A price of 40 against a book value of 20.0 gives a multiple of 2.0; substituting the main formula shows the ratio is market price times shares divided by equity.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| P | Market price per share | currency | The current traded price of a single share. |
| BVPS | Book value per share | currency | The accounting value per share computed from equity and shares outstanding. |
How To Calculate Book Value Per Share
- 1
Find total shareholders' equity
Take the equity attributable to ordinary shareholders from the latest balance sheet. It equals total assets minus total liabilities and may be labelled shareholders' funds or owners' equity. Check whether the figure includes or excludes minority interests, and make sure you are using equity rather than a liability or a revenue line. Keep the reporting date in mind, because the share count must match it.
- 2
Establish the shares outstanding
Use the number of shares actually in investors' hands at that date, not the authorised maximum and not the number issued if some shares are held as treasury stock. The share register or the notes to the accounts usually gives the exact count. If you want a diluted figure, say so explicitly and use the diluted count throughout; mixing a basic count with diluted equity produces a misleading result.
- 3
Divide equity by shares
Divide the equity figure by the share count to obtain book value per share. With 5,000,000 of equity and 250,000 shares the result is 20.0. Confirm that both numbers are in the same currency and that the share count is a plain quantity. A result that is wildly out of line with the share price is a signal to recheck the units rather than a discovery.
- 4
Rescale to a thousand shares if needed
For a per-thousand view, divide equity by the number of thousands of shares. Here 250,000 shares form 250 blocks of a thousand, so equity per thousand shares is 20,000.0. This is the per-share answer multiplied by a thousand, so it carries exactly the same information in a more convenient size for comparison across firms with very different capital structures.
- 5
Compare with the market price
Divide the market price per share by book value per share to get the price-to-book multiple. At a price of 40 against a book value of 20.0 the multiple is 2.0, so the market pays twice the recorded accounting value. Read the multiple alongside earnings and sector norms, since a low figure can mean either a bargain or an asset base that earns poorly.
Examples
Example 1: The default case — 5,000,000 of equity over 250,000 shares
- totalEquity
- 5000000
- sharesOutstanding
- 250000
| Step | Calculation | Result |
|---|---|---|
| Equity available to shareholders | totalEquity | 5000000.0 |
| Shares outstanding | sharesOutstanding | 250000.0 |
| Book value per share | 5,000,000 / 250,000 | 20.0 |
Result: With 5,000,000 of equity and 250,000 shares outstanding, book value per share is 20.0 of accounting capital behind each share.
Example 2: Doubling equity with the share count unchanged
- totalEquity
- 10000000
- sharesOutstanding
- 250000
| Step | Calculation | Result |
|---|---|---|
| Doubled equity | 5,000,000 x 2 | 10000000.0 |
| Shares unchanged | sharesOutstanding | 250000.0 |
| Book value at double equity | 10,000,000 / 250,000 | 40.0 |
Result: With equity doubled to 10,000,000 and the same 250,000 shares, book value per share rises to 40.0, exactly twice the original figure.
Example 3: Price-to-book at a market price of 40
- totalEquity
- 5000000
- sharesOutstanding
- 250000
| Step | Calculation | Result |
|---|---|---|
| Market price per share | given price | 40.0 |
| Book value per share | 5,000,000 / 250,000 | 20.0 |
| Price-to-book ratio | 40 / 20 | 2.0 |
Result: At a market price of 40 and a book value per share of 20.0, the price-to-book ratio is 2.0 times recorded accounting value.
Calculator
Book value per share
20
- Book value at double equity
- 40
- Equity per thousand shares
- 20000
- Price-to-book at a price of 40
- 2
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
Prefer a full-width tool? Open the Book Value Per Share calculator page.
Common Mistakes
Using authorised or issued shares instead of outstanding shares
Authorised shares are only a constitutional ceiling, and issued shares can include treasury stock the company still holds. Dividing by either overstates the denominator and understates book value per share. Always use the count of shares actually held by investors on the balance-sheet date.
Confusing total assets with shareholders' equity
Book value per share is built on equity, which is assets minus liabilities. Dividing the gross asset total by shares ignores what the company owes and produces a figure far too high. Check that the numerator is the equity line, not the top line of the balance sheet.
Mismatching the dates of the two inputs
Equity is a point-in-time figure while the share count can change through issues or buybacks. Pairing an old equity figure with a current share count, or the reverse, silently distorts the result. Take both numbers from the same reporting date and note any later share movements separately.
Treating book value as the market price
Book value is an accounting record of past capital, not a forecast of what a share will sell for. Market prices reflect expected earnings, growth and risk, so they can sit far above or below book value. Use the two together rather than assuming one must equal the other.
Ignoring preference shares and minority interests
If preference shareholders have a claim on equity, their capital should be removed before dividing by ordinary shares. Likewise, decide whether minority interests belong in the numerator and stay consistent with the share count you use. Mixing the conventions changes the per-share figure without any change in the business.
Reading a price-to-book below one as automatically cheap
A low multiple can mean the market doubts the quality of the assets or expects losses ahead. It is only a signal when the recorded assets are realistically valued and the business is profitable. Compare with peers in the same sector before drawing a conclusion from the ratio alone.
FAQ
What exactly does book value per share measure?
It measures the accounting capital attributable to each ordinary share, found by dividing shareholders' equity by shares outstanding. In the worked case 5,000,000 of equity over 250,000 shares gives 20.0 per share. It is a balance-sheet figure, so it reflects recorded assets and liabilities rather than current market sentiment or future earnings power.
How is book value per share different from market value per share?
Market value is the price at which shares currently trade and changes with every transaction. Book value is an accounting figure that moves only when equity or the share count changes. The two can diverge widely: a profitable growth company may trade at several times book value, while a struggling asset-heavy firm may trade below it.
Why does doubling equity double the result?
The formula divides equity by a fixed share count, so it is directly proportional to the numerator. Holding 250,000 shares constant, moving equity from 5,000,000 to 10,000,000 lifts book value per share from 20.0 to 40.0. Conversely, issuing more shares with equity unchanged would reduce the figure in exact proportion.
What does the price-to-book ratio tell me?
It compares what the market pays with the recorded accounting value. Dividing a price of 40 by a book value per share of 20.0 gives 2.0, so investors pay twice the book amount. A multiple above one usually embeds expectations of growth or unrecorded assets, while a multiple below one may reflect doubt about asset quality or future profits.
Can book value per share be negative?
Yes. If accumulated losses exceed paid-in capital, shareholders' equity turns negative and so does the per-share figure. In that situation the price-to-book ratio is not meaningful, because dividing a positive price by a negative book value gives a misleading sign. Focus instead on the size of the deficit and the path to restoring equity.
Do share buybacks change book value per share?
Yes. Buybacks reduce both equity, because cash leaves the company, and the number of shares outstanding, because repurchased shares become treasury stock. The net effect depends on the price paid relative to book value per share: buying below book value tends to lift the remaining per-share figure, while buying above it can lower it.
References
- [1], Book value — https://en.wikipedia.org/wiki/Book_value
- [2], Shareholders' equity — https://en.wikipedia.org/wiki/Shareholders%27_equity
- [3], Price-to-book ratio — https://en.wikipedia.org/wiki/Price-to-book_ratio
