Geometry
How To Calculate The Surface Area Of A Hemisphere
A hemisphere is exactly half a sphere, cut through its centre, and its surface area comes in two flavours that are easy to confuse. The curved dome covers 2 pi r squared, the flat circular base covers pi r squared, and together they give a total of 3 pi r squared. This page separates the two, shows where each term comes from and works through examples so you never report the wrong one.
Last updated
Quick Answer
Total SA = 3 pi r^2 (curved = 2 pi r^2, base = pi r^2)
- r
- Radius of the hemisphere
- pi
- The constant pi, about 3.14159
- SA
- Surface area, in square units
Square the radius, multiply by pi for the flat base, by two pi for the curved dome and by three pi for the whole surface including the base. With a radius of 6 the total surface area is 339.29200658769764 square units, the curved part is 226.1946710584651, the base is 113.09733552923255 and the enclosed volume is 452.3893421169302 cubic units. The classic mistake is to quote the curved area when the question asks for the total.
What Is The Surface Area Of A Hemisphere?
A hemisphere is one half of a sphere, obtained by slicing a sphere through its centre with a plane. The cut face is a great circle, the largest circle that can be drawn on the sphere, and it becomes the flat circular base of the solid. Everything about the hemisphere follows from this single construction: the dome is half the sphere's curved skin and the base is the circular disk exposed by the cut. Recognising the two separate surfaces is the key to getting the area right.
The curved surface area is exactly half of a full sphere's surface. A sphere has curved area 4 pi r squared, so halving it leaves 2 pi r squared for the dome. This part is sometimes called the lateral surface area, by analogy with the sides of a prism, and it is the figure you want when an object rests on its flat face and the underside is not exposed. For a hemisphere of radius 6 that curved area is 226.1946710584651 square units.
The flat base is an ordinary circle of radius r, so its area is pi r squared. With radius 6 that is 113.09733552923255 square units. Notice that the curved area is precisely twice the base area, because 2 pi r squared is two copies of pi r squared. That simple two-to-one relationship holds for every hemisphere and is a quick way to check your work before moving on.
The total surface area of the solid includes both the dome and the flat base. Adding 2 pi r squared and pi r squared gives 3 pi r squared, which for radius 6 is 339.29200658769764 square units. Confusing the curved area with the total is the classic error: the dome alone is 2 pi r squared, but a closed hemisphere has one more pi r squared from the disk underneath. Ask whether the base is exposed or covered before you choose which formula to use.
The volume of a hemisphere is two thirds the volume of a full sphere, because volume splits evenly when a sphere is cut through the centre. A sphere holds 4/3 pi r cubed, so a hemisphere holds 2/3 pi r cubed. With radius 6 this is 452.3893421169302 cubic units. This is a cubic measure and answers how much the solid holds, quite unlike the square-unit surface area that answers how much material covers it.
A neat relationship links the three areas to one another. If the base area is called B, then the curved area is 2B and the total is 3B, so knowing any one of them immediately gives the other two. In the worked example B is 113.09733552923255, the curved area is twice that at 226.1946710584651 and the total is three times it at 339.29200658769764. Keeping this ratio in mind makes it much harder to accidentally report the curved figure as the total.
Scaling behaves the way it does for every solid: lengths grow linearly, areas grow with the square of the radius and volumes grow with its cube. Doubling the radius multiplies every area by four but multiplies the volume by eight, so a large dome needs proportionally less surface material per unit of enclosed space than a small one. This is why large storage tanks are cheaper to clad per litre than small vessels, and why small droplets evaporate far faster than large puddles.
Hemispheres appear constantly in the physical world. Architectural domes, mixing bowls, the bowls of spoons, half-spherical tanks and the northern and southern halves of a planet are all approximate hemispheres. A manufacturer covering a dome with cladding needs the curved area, whereas someone painting the entire outside of a solid model needs the total. Deciding which surface is actually exposed is a modelling question that comes before the arithmetic. A hemispherical bowl is the reverse case again: a maker glazing the inside wants the curved area, but someone estimating the material in a solid hemisphere-shaped paperweight wants the whole 3 pi r squared. The same object therefore has two legitimate answers depending on what is being measured, which is exactly why the two formulas are kept distinct throughout this page.
One boundary is worth stating plainly: these formulas assume a mathematically perfect hemisphere defined by a single radius, with the cut passing exactly through the centre. A shallower or deeper cap is a spherical segment and needs a different formula. Likewise, answers are in square units for area and cubic units for volume, using the same length unit throughout; convert the radius to one unit before squaring it, and remember that the many decimal places shown here are the true computed values, not rounded estimates.
Formula
SA = 3 pi r^2
Formula page →The curved dome contributes 2 pi r squared and the flat circular base contributes pi r squared, so the closed solid has three pi r squared in total.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius | length units | Distance from the centre of the base circle to any point on the rim. |
| pi | Pi | constant | The constant ratio of a circle's circumference to its diameter, about 3.14159. |
CSA = 2 pi r^2
Formula page →Half of a sphere's 4 pi r squared of curved skin. Use this when the flat base is not part of the surface you are measuring.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius | length units | Radius of the sphere from which the hemisphere was cut. |
| pi | Pi | constant | The circular constant, about 3.14159. |
V = (2/3) pi r^3
Formula page →Two thirds of a sphere's 4/3 pi r cubed, since the cut divides the sphere's volume exactly in half.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius | length units | Radius of the hemisphere, cubed in this formula. |
| pi | Pi | constant | The circular constant, about 3.14159. |
How To Calculate The Surface Area Of A Hemisphere
- 1
Identify the radius and fix its units
Write down the radius r, which runs from the centre of the flat base to any point on the rim. If you are given a diameter, halve it first. Make sure the radius is in a single consistent unit, because every later step squares or cubes it and any unit mismatch is magnified.
- 2
Square the radius
Multiply the radius by itself. With radius 6 the square is 36. This quantity appears in all three area formulas, so computing it once and reusing it avoids repeated errors and keeps the arithmetic tidy.
- 3
Work out the base, curved and total areas
The flat base is pi times the squared radius, here 113.09733552923255. The curved dome is twice that, 226.1946710584651. Adding them gives the total surface area, three times the base, which is 339.29200658769764 square units for this radius.
- 4
Compute the volume if needed
For the enclosed space use two thirds of pi times the radius cubed. Take the squared radius from earlier, multiply by the radius again and then by two thirds of pi. For radius 6 the volume is 452.3893421169302 cubic units, a different quantity with different units from any of the areas.
- 5
Decide which area the question wants and check units
If the base is exposed, report the total 3 pi r squared; if only the dome matters, report 2 pi r squared. Label areas in square units and volume in cubic units. As a final check, confirm that the curved area is exactly twice the base and that the total is exactly three times the base; if that ratio fails, a factor has been lost somewhere.
Examples
Example 1: The default hemisphere: radius 6
- radius
- 6
| Step | Calculation | Result |
|---|---|---|
| Square the radius | radius x radius = 6 x 6 | 36.0 |
| Flat circular base | pi x 36 | 113.09733552923255 |
| Curved dome | 2 x pi x 36 | 226.1946710584651 |
| Volume | (2/3) x pi x 6 x 36 | 452.3893421169302 |
| Total surface area | 3 x pi x 36 | 339.29200658769764 |
Result: A hemisphere of radius 6 has a total surface area of 339.29200658769764 square units, made up of a curved area of 226.1946710584651 and a base of 113.09733552923255. Its volume is 452.3893421169302 cubic units.
Example 2: A small dome: radius 3
- radius
- 3
| Step | Calculation | Result |
|---|---|---|
| Square the radius | radius x radius = 3 x 3 | 9.0 |
| Flat circular base | pi x 9 | 28.274333882308138 |
| Curved dome | 2 x pi x 9 | 56.548667764616276 |
| Volume | (2/3) x pi x 3 x 9 | 56.548667764616276 |
| Total surface area | 3 x pi x 9 | 84.82300164692441 |
Result: With radius 3 the total surface area is 84.82300164692441 square units. The curved dome accounts for 56.548667764616276 and the base for 28.274333882308138 square units, while the volume is 56.548667764616276 cubic units.
Example 3: A large tank end: radius 10
- radius
- 10
| Step | Calculation | Result |
|---|---|---|
| Square the radius | radius x radius = 10 x 10 | 100.0 |
| Flat circular base | pi x 100 | 314.1592653589793 |
| Curved dome | 2 x pi x 100 | 628.3185307179587 |
| Volume | (2/3) x pi x 10 x 100 | 2094.395102393195 |
| Total surface area | 3 x pi x 100 | 942.4777960769379 |
Result: For radius 10 the total surface area is 942.4777960769379 square units. The curved portion is 628.3185307179587 and the flat base is 314.1592653589793 square units, with a volume of 2094.395102393195 cubic units.
Calculator
Total surface area (including base)
339.292
- Curved surface area
- 226.1947
- Flat base area
- 113.0973
- Volume
- 452.3893
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
Prefer a full-width tool? Open the The Surface Area Of A Hemisphere calculator page.
Common Mistakes
Confusing the curved area with the total
The dome alone is 2 pi r squared, but a closed hemisphere also has the flat base of pi r squared, giving 3 pi r squared in total. For radius 6 those are 226.1946710584651 and 339.29200658769764. Quoting the curved figure as the answer is the single most common error on this topic.
Using the full sphere formula
A sphere has 4 pi r squared of curved surface, so applying that to a hemisphere doubles the correct curved area. Remember that the dome is half the sphere's skin; only the volume, not the curved area, is also halved in the same way.
Forgetting to square the radius
Every area formula uses r squared, not r. Multiplying pi by the radius once gives a length times a constant, which is dimensionally wrong. Square the radius first, then multiply by pi and the appropriate factor.
Using the diameter instead of the radius
If a problem states a diameter of 12, the radius is 6, not 12. Substituting the diameter directly makes every area four times too large and the volume eight times too large, because those quantities depend on the square and cube of the radius.
Mixing square and cubic units
Surface area is measured in square units and volume in cubic units. Writing 452.3893421169302 square units for the volume of the worked example is a dimensional error. Keep the two quantities clearly labelled even when their numbers are written side by side.
Rounding pi or the final value too early
Truncating pi to 3.14 or rounding an intermediate result shifts the answer noticeably, and the long decimal tails shown in these examples are the exact computed values. Keep full precision until the final step, then round only if the problem explicitly asks for a given number of decimal places.
FAQ
What is the formula for the total surface area of a hemisphere?
It is 3 pi r squared. The curved dome contributes 2 pi r squared and the flat circular base contributes pi r squared, so the two together give three pi r squared.
What is the difference between curved and total surface area?
Curved surface area covers only the dome and equals 2 pi r squared. Total surface area adds the flat base and equals 3 pi r squared. Use the curved figure when the object rests on its base and the underside is hidden.
How do you find the volume of a hemisphere?
Use 2/3 pi r cubed, which is half the volume of a full sphere. For radius 6 that gives 452.3893421169302 cubic units. Remember that volume uses cubic units, not square units.
Is a hemisphere's surface area just half of a sphere's?
Only the curved part is. Half of a sphere's 4 pi r squared is 2 pi r squared for the dome, but a closed hemisphere has an extra circular base, so its total is 3 pi r squared rather than 2 pi r squared.
What if I am given the diameter instead of the radius?
Divide the diameter by two to get the radius, then substitute into the formula. Because the area depends on the radius squared, using the diameter by mistake makes the answer four times too big.
What units should the answer be in?
Square units for any surface area and cubic units for volume, using the same length unit throughout. If the radius is in centimetres, the areas are in square centimetres and the volume is in cubic centimetres.
Does the total surface area formula still apply to a hollow hemisphere?
For a thin shell with both an inside and an outside curved face, the exposed area is larger than the solid's, because you must count the inner dome as well. The 3 pi r squared figure describes a solid hemisphere with one curved face and one flat base, so decide first whether you are dealing with a solid or a shell before choosing the formula.
References
- [1], Hemisphere — https://en.wikipedia.org/wiki/Hemisphere
- [2], Sphere — https://en.wikipedia.org/wiki/Sphere
- [3], Surface area — https://en.wikipedia.org/wiki/Surface_area
