Math · 75 calculators
Surface Area Of A Hemisphere Calculator
A hemisphere is exactly half a sphere, cut through its centre, and its surface area comes in two flavours that are easy to confuse. The curved dome covers 2 pi r squared, the flat circular base covers pi r squared, and together they give a total of 3 pi r squared. This page separates the two, shows where each term comes from and works through examples so you never report the wrong one.
Last updated
Total surface area (including base)
339.292
- Curved surface area
- 226.1947
- Flat base area
- 113.0973
- Volume
- 452.3893
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
Total SA = 3 pi r^2 (curved = 2 pi r^2, base = pi r^2)
- r
- Radius of the hemisphere
- pi
- The constant pi, about 3.14159
- SA
- Surface area, in square units
How to check the result by hand
- 1
Identify the radius and fix its units
Write down the radius r, which runs from the centre of the flat base to any point on the rim. If you are given a diameter, halve it first. Make sure the radius is in a single consistent unit, because every later step squares or cubes it and any unit mismatch is magnified.
- 2
Square the radius
Multiply the radius by itself. With radius 6 the square is 36. This quantity appears in all three area formulas, so computing it once and reusing it avoids repeated errors and keeps the arithmetic tidy.
- 3
Work out the base, curved and total areas
The flat base is pi times the squared radius, here 113.09733552923255. The curved dome is twice that, 226.1946710584651. Adding them gives the total surface area, three times the base, which is 339.29200658769764 square units for this radius.
- 4
Compute the volume if needed
For the enclosed space use two thirds of pi times the radius cubed. Take the squared radius from earlier, multiply by the radius again and then by two thirds of pi. For radius 6 the volume is 452.3893421169302 cubic units, a different quantity with different units from any of the areas.
- 5
Decide which area the question wants and check units
If the base is exposed, report the total 3 pi r squared; if only the dome matters, report 2 pi r squared. Label areas in square units and volume in cubic units. As a final check, confirm that the curved area is exactly twice the base and that the total is exactly three times the base; if that ratio fails, a factor has been lost somewhere.
Common Questions
How does the Surface Area Of A Hemisphere Calculator work?
Square the radius, multiply by pi for the flat base, by two pi for the curved dome and by three pi for the whole surface including the base. With a radius of 6 the total surface area is 339.29200658769764 square units, the curved part is 226.1946710584651, the base is 113.09733552923255 and the enclosed volume is 452.3893421169302 cubic units. The classic mistake is to quote the curved area when the question asks for the total.
What do I need to enter in the Surface Area Of A Hemisphere Calculator?
It takes 1 inputs: Radius. Fields that expect a unit say so next to the label.
Where does Total surface area (including base) come from?
It comes from SA = 3 pi r^2 — the curved dome contributes 2 pi r squared and the flat circular base contributes pi r squared, so the closed solid has three pi r squared in total.
What is the most common mistake with the Surface Area Of A Hemisphere Calculator?
Confusing the curved area with the total. The dome alone is 2 pi r squared, but a closed hemisphere also has the flat base of pi r squared, giving 3 pi r squared in total. For radius 6 those are 226.1946710584651 and 339.29200658769764. Quoting the curved figure as the answer is the single most common error on this topic.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Surface Area Of A Hemisphere page.
