CCalclabhub

Math · 75 calculators

Arc Length Of A Circle Calculator

An arc is the curved portion of a circle's edge between two points, and calculating its length tells you how far it is to travel around the rim rather than across it. This page shows how the central angle fixes what fraction of the full circumference an arc covers, then extends the same idea to sector area, the share of the circle and the angle left over. The worked examples use a radius of 10 and an angle of 60 degrees.

Last updated

Arc length

10.472

Sector area
52.3599
Arc as a share of the circle
16.67%
Degrees remaining
300

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

s = 2πr × (θ / 360)

s
Arc length — the distance along the curve
r
Radius of the circle
θ
Central angle in degrees
C
Full circumference, 2πr

How to check the result by hand

  1. 1

    Identify the radius and the central angle

    Write down the radius r and the angle θ at the centre of the circle. Check that the angle is in degrees before using the degree formula. If a diameter is given, halve it first, because the formula needs the radius. With the default inputs the radius is 10 and the angle is 60 degrees.

  2. 2

    Find the full circumference

    Compute the circumference of the whole circle as 2πr. For a radius of 10 this is 62.83185307179586. This is the distance all the way around, and the arc will be a fraction of this total. Keeping full precision here matters more than rounding π early, which would push the final answer off by a noticeable amount.

  3. 3

    Work out the angular fraction

    Divide the central angle by 360 to find what share of a complete turn the arc covers. With θ = 60 the fraction is 0.16666666666666666, or about 16.67 per cent. The remaining portion of the circle is 360 − 60 = 300 degrees, which corresponds to the major arc.

  4. 4

    Multiply to obtain the arc length and sector area

    Multiply the circumference by the angular fraction: 62.83185307179586 × 0.16666666666666666 gives an arc length of 10.471975511965976. For the sector area, multiply πr² by the same fraction, giving 52.35987755982988. Both quantities scale with the identical angular share.

  5. 5

    Interpret and sanity-check the result

    The arc length must be smaller than the full circumference and proportional to both the radius and the angle. Here one sixth of a circle of radius 10 gives an arc of about 10.47, while the straight chord between the same endpoints is only 10. A result larger than the circumference means the fraction was applied the wrong way round.

Common Questions

How does the Arc Length Of A Circle Calculator work?

Find the full circumference 2πr, work out the fraction of a complete turn swept by the central angle (θ / 360), and multiply the two. That same fraction of the circle's area gives the sector area, and 360 − θ gives the angle that remains. Doubling the radius or the angle doubles the arc length.

What do I need to enter in the Arc Length Of A Circle Calculator?

It takes 2 inputs: Radius (length), Central angle (degrees). Fields that expect a unit say so next to the label.

Where does Arc length come from?

It comes from s = 2πr × (θ / 360) — multiply the full circumference by the fraction of a complete turn swept by the central angle. Use this form when the angle is given in degrees.

What is the most common mistake with the Arc Length Of A Circle Calculator?

Using the angle without dividing by 360. The angle is a fraction of a turn, not a multiplier in its own right. Multiplying the circumference by 60 instead of 60/360 inflates the answer sixfold. Always reduce the central angle to a fraction between zero and one before multiplying.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Arc Length Of A Circle page.