Geometry
How To Calculate The Arc Length Of A Circle
An arc is the curved portion of a circle's edge between two points, and calculating its length tells you how far it is to travel around the rim rather than across it. This page shows how the central angle fixes what fraction of the full circumference an arc covers, then extends the same idea to sector area, the share of the circle and the angle left over. The worked examples use a radius of 10 and an angle of 60 degrees.
Last updated
Quick Answer
s = 2πr × (θ / 360)
- s
- Arc length — the distance along the curve
- r
- Radius of the circle
- θ
- Central angle in degrees
- C
- Full circumference, 2πr
Find the full circumference 2πr, work out the fraction of a complete turn swept by the central angle (θ / 360), and multiply the two. That same fraction of the circle's area gives the sector area, and 360 − θ gives the angle that remains. Doubling the radius or the angle doubles the arc length.
What Is The Arc Length Of A Circle?
An arc is a portion of the circumference of a circle — the curved path traced between two points on the circle's edge. Its length is not a property of the circle alone but of how far around the circle you travel. A small slice of the edge gives a short arc; a sweep all the way around gives the whole circumference. Measuring an arc therefore means measuring a fraction of a known total and multiplying, and that fraction is set by the angle at the centre of the circle.
That angle is called the central angle: it is formed by two radii drawn from the centre to the ends of the arc. If the central angle is θ degrees, the arc sweeps θ out of a possible 360 degrees, so it covers the fraction θ/360 of the whole circle. Multiplying the circumference 2πr by this fraction gives the arc length s = 2πr × θ/360. The formula is really nothing more than the statement that the part is to the whole as the angle is to a complete turn.
Working in radians often simplifies the expression. A radian is the angle subtended when the arc length equals the radius, and a complete turn is 2π radians, so 360 degrees equals 2π radians. In radians the fraction θ/360 becomes θ/(2π), and the 2π cancels, leaving the compact form s = rθ. A 60 degree angle is π/3 radians, and with r = 10 this gives an arc length of 10.471975511965976, exactly the value the degree formula produces. The two forms are the same calculation expressed in different angular units.
The same angular fraction governs the area of the sector — the wedge swept out between the two radii. A full circle has area πr², so a sector covering θ degrees has area πr² × θ/360. With r = 10 and θ = 60 this is 52.35987755982988. Notice the relationship between the two results: sector area equals half the radius times the arc length, because πr² × θ/360 = ½r × (2πr × θ/360) = ½rs. That identity is a convenient way to move between arc length and sector area without recomputing the angle at all.
Every arc has a companion: the rest of the circle. If one arc spans θ degrees, the remaining arc spans 360 − θ degrees, and with the default 60 degree angle that leaves 300 degrees. The smaller of the two is called the minor arc and the larger the major arc. When someone says the arc between two points without qualification they usually mean the minor arc, so it is worth checking which one a problem actually wants before applying the formula. Expressing the arc as a share of the circle, here 0.16666666666666666 or about 16.67 per cent, makes that choice explicit.
Arc length is linear in both of its inputs, which makes mental checks easy. Double the radius while holding the angle fixed and the arc doubles, because the circumference doubles. Double the angle while holding the radius fixed and the arc also doubles, because the swept fraction doubles. In the worked example the arc is one sixth of a circle of radius 10; the same 60 degree angle on a radius of 20 gives an arc of 20.94395102393195, exactly twice as long. There are no cross terms or squares of the angle to worry about.
The calculation appears whenever a distance is measured along a curve rather than across it. Clock hands trace arcs, a rotating wheel carries a point along an arc, circular running tracks are laid out in arcs, and surveyors describe curved boundaries the same way. An architect sizing a curved window frame or an engineer bending a pipe both need the length along the curve, not the straight-line distance between its ends, and the central angle is the natural input in each case. Converting an angular specification into a physical length is precisely what this formula does.
The inputs have natural boundaries. An angle of zero gives an arc of zero length, while an angle of 360 degrees gives the entire circumference. A negative angle or one larger than 360 describes more than one full turn and should be reduced modulo 360 before using the fraction, unless the extra revolutions are genuinely part of the path being measured. The radius must be positive, and the radius and the arc length are measured in the same length unit — centimetres in give centimetres out, metres in give metres out. Mixing units is a frequent source of wrong answers.
It is important not to confuse arc length with chord length. The chord is the straight segment joining the two endpoints, while the arc is the curved path between them, and for the same two points the chord is always shorter. For a 60 degree angle on a radius of 10 the chord is 10 units long, while the arc is about 10.47 units. As the angle shrinks the two converge, and for very small angles the chord is a good approximation to the arc, which is why the small-angle approximation is so useful in geometry and physics. Knowing which of the two a question asks for avoids a large class of mistakes.
Formula
s = 2πr × (θ / 360)
Formula page →Multiply the full circumference by the fraction of a complete turn swept by the central angle. Use this form when the angle is given in degrees.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius of the circle | length | Distance from the centre to the edge; must be positive. |
| θ | Central angle | degrees | Angle between the two radii, measured in degrees. |
| s | Arc length | length | Distance along the curved edge between the two endpoints. |
A = πr² × (θ / 360)
Formula page →The sector occupies the same angular fraction of the full circle's area as the arc does of its circumference. Equivalently, A equals half the radius times the arc length.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius of the circle | length | The same radius used for the arc length. |
| θ | Central angle | degrees | Swept angle in degrees, identical to the one used for the arc. |
| A | Sector area | area | Area of the wedge bounded by the two radii and the arc. |
s = rθ
Formula page →When the angle is measured in radians the fraction θ/(2π) cancels the 2π in the circumference, leaving radius times angle. A 60 degree angle is π/3 radians.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| r | Radius of the circle | length | Distance from the centre to the circumference. |
| θ | Central angle | radians | Swept angle measured in radians, not degrees. |
How To Calculate The Arc Length Of A Circle
- 1
Identify the radius and the central angle
Write down the radius r and the angle θ at the centre of the circle. Check that the angle is in degrees before using the degree formula. If a diameter is given, halve it first, because the formula needs the radius. With the default inputs the radius is 10 and the angle is 60 degrees.
- 2
Find the full circumference
Compute the circumference of the whole circle as 2πr. For a radius of 10 this is 62.83185307179586. This is the distance all the way around, and the arc will be a fraction of this total. Keeping full precision here matters more than rounding π early, which would push the final answer off by a noticeable amount.
- 3
Work out the angular fraction
Divide the central angle by 360 to find what share of a complete turn the arc covers. With θ = 60 the fraction is 0.16666666666666666, or about 16.67 per cent. The remaining portion of the circle is 360 − 60 = 300 degrees, which corresponds to the major arc.
- 4
Multiply to obtain the arc length and sector area
Multiply the circumference by the angular fraction: 62.83185307179586 × 0.16666666666666666 gives an arc length of 10.471975511965976. For the sector area, multiply πr² by the same fraction, giving 52.35987755982988. Both quantities scale with the identical angular share.
- 5
Interpret and sanity-check the result
The arc length must be smaller than the full circumference and proportional to both the radius and the angle. Here one sixth of a circle of radius 10 gives an arc of about 10.47, while the straight chord between the same endpoints is only 10. A result larger than the circumference means the fraction was applied the wrong way round.
Examples
Example 1: Radius 10, central angle 60 degrees
- radius
- 10
- angleDegrees
- 60
| Step | Calculation | Result |
|---|---|---|
| Full circumference | 2 × 3.141592653589793 × 10 | 62.83185307179586 |
| Angular fraction | 60 / 360 | 0.16666666666666666 |
| Degrees remaining | 360 - 60 | 300 |
| Sector area | 3.141592653589793 × 10 × 10 × 0.16666666666666666 | 52.35987755982988 |
| Arc length | 62.83185307179586 × 0.16666666666666666 | 10.471975511965976 |
Result: The arc length is 10.471975511965976, the sector area is 52.35987755982988, the arc is 16.67% of the circle and 300 degrees of the turn remain.
Example 2: Radius 5, central angle 90 degrees (a quarter circle)
- radius
- 5
- angleDegrees
- 90
| Step | Calculation | Result |
|---|---|---|
| Full circumference | 2 × 3.141592653589793 × 5 | 31.41592653589793 |
| Angular fraction | 90 / 360 | 0.25 |
| Degrees remaining | 360 - 90 | 270 |
| Sector area | 3.141592653589793 × 5 × 5 × 0.25 | 19.634954084936208 |
| Arc length | 31.41592653589793 × 0.25 | 7.853981633974483 |
Result: With a radius of 5 and an angle of 90 degrees the arc length is 7.853981633974483, exactly a quarter of the circumference, and the sector area is 19.634954084936208.
Example 3: Radius 12, central angle 270 degrees (a major arc)
- radius
- 12
- angleDegrees
- 270
| Step | Calculation | Result |
|---|---|---|
| Full circumference | 2 × 3.141592653589793 × 12 | 75.39822368615503 |
| Angular fraction | 270 / 360 | 0.75 |
| Degrees remaining | 360 - 270 | 90 |
| Sector area | 3.141592653589793 × 12 × 12 × 0.75 | 339.29200658769764 |
| Arc length | 75.39822368615503 × 0.75 | 56.548667764616276 |
Result: A 270 degree sweep on a radius of 12 gives an arc length of 56.548667764616276, three quarters of the circumference, leaving 90 degrees for the minor arc.
Calculator
Arc length
10.472
- Sector area
- 52.3599
- Arc as a share of the circle
- 16.67%
- Degrees remaining
- 300
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
Prefer a full-width tool? Open the The Arc Length Of A Circle calculator page.
Common Mistakes
Using the angle without dividing by 360
The angle is a fraction of a turn, not a multiplier in its own right. Multiplying the circumference by 60 instead of 60/360 inflates the answer sixfold. Always reduce the central angle to a fraction between zero and one before multiplying.
Confusing the radius with the diameter
The circumference formula uses the radius, so a diameter must be halved first. Substituting a diameter of 20 as if it were a radius of 20 doubles the circumference and therefore doubles the arc length. Check which measurement the problem actually supplies.
Mixing degrees and radians
The degree formula s = 2πr × θ/360 and the radian formula s = rθ are not interchangeable. Feeding 60 directly into the radian formula gives a wildly wrong answer; convert 60 degrees to π/3 radians first, or use the degree form and keep the angle as it is.
Confusing arc length with sector area
Arc length is a distance measured along the curve, while sector area is a region measured in square units. They are related by sector area = ½r × arc length, but they are not the same quantity and never share a unit.
Picking the wrong arc
Two points on a circle define both a minor arc and a major arc. Using θ when the problem wants 360 − θ, or the other way round, gives a complementary answer. State which arc is required and check whether the fraction is below or above one half.
Rounding π too early
Replacing π with 3.14 truncates the arc length in the fourth significant figure and the error grows with the radius. Use the full value of π throughout and round only the final answer, especially when the arc will feed into a later calculation.
FAQ
What is the difference between an arc and a chord?
An arc is the curved path between two points on a circle, while a chord is the straight line joining those same points. For any pair of distinct points the chord is shorter than the arc. For a 60 degree angle on a radius of 10 the chord is 10 units but the arc is about 10.47 units.
How do I calculate arc length in radians?
Use the compact formula s = rθ with θ in radians. Convert degrees to radians by multiplying by π/180, so 60 degrees becomes π/3. With a radius of 10 the arc length is 10 × π/3 = 10.471975511965976, the same result as the degree formula.
What happens if the central angle is greater than 360 degrees?
An angle above 360 degrees describes more than one complete revolution. If you only want the arc around the circle once, reduce the angle modulo 360 and apply the usual fraction. If the extra turns are genuinely part of a path, such as a rope wound several times, include them in the total angle instead.
Is arc length the same as the perimeter of a sector?
No. The perimeter of a sector includes the arc plus the two straight radii that bound it, so it equals the arc length plus 2r. The arc length alone measures only the curved edge. Add the radii when a question asks for the perimeter of the wedge rather than the length of its arc.
How does the arc length change if I double the radius?
It doubles, because arc length is directly proportional to the radius. The angular fraction stays the same while the circumference doubles. Likewise, doubling the central angle at a fixed radius also doubles the arc, since the swept share of the circle doubles.
What is the difference between a major arc and a minor arc?
The minor arc is the shorter path between two points and spans less than 180 degrees; the major arc is the longer path and spans more than 180 degrees. The two angles add to 360. With a 60 degree minor arc, the corresponding major arc spans 300 degrees.
References
- [1]Wikipedia, Arc (geometry) — https://en.wikipedia.org/wiki/Arc_(geometry)
- [2]Wikipedia, Circle — https://en.wikipedia.org/wiki/Circle
- [3]Wikipedia, Sector (geometry) — https://en.wikipedia.org/wiki/Sector_(geometry)
