CCalclabhub

Math · 64 calculators

Area Of An Annulus Calculator

An annulus is the ring-shaped region between two circles that share the same centre. Calculating its area means subtracting the smaller circle from the larger one, which reduces to a single expression in the two radii. This page explains that formula, shows how the ring width relates to the area, and works through examples so you can apply it to pipes, paths and washers with confidence.

Area of the annulus

50.2655

Outer circle area
78.5398
Inner circle area
28.2743
Ring width
2

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

Area = pi * (R^2 - r^2)

A
Area of the annulus, in square units
R
Radius of the outer circle
r
Radius of the inner circle, the hole
w
Width of the ring, equal to R minus r

How to check the result by hand

  1. 1

    Identify the two radii

    Find the radius of the outer circle, R, and the radius of the inner circle, r, making sure the two circles really share a centre. If a problem gives diameters instead, halve each one first, because the formula works only with radii. Check that both measurements use the same unit, converting one if necessary, and confirm which of the two is larger so that the subtraction comes out positive.

  2. 2

    Square each radius

    Multiply each radius by itself. With the default values, the outer radius of 5 gives 25 and the inner radius of 3 gives 9. Squaring both numbers before subtracting is essential: subtracting first and then squaring produces a much smaller and incorrect result. Keep the squares to hand, since the calculator reuses them for the two companion circle areas as well as the ring itself.

  3. 3

    Subtract the inner square from the outer square

    Compute R squared minus r squared. For the default radii this is 25 minus 9, which equals 16. This single number captures how much larger the outer circle is than the hole, and it is the only place where the two radii interact. A negative answer here means the radii were entered in the wrong order or that the supposed inner radius is actually the larger one.

  4. 4

    Multiply the difference by pi

    Multiply the difference of squares by pi, approximately 3.141592653589793. With a difference of 16 the annulus area is 50.26548245743669 square units. This multiplication converts the squared lengths into a proper area and is the last operation in the main formula. Carrying the full value of pi through the calculation avoids the small drift that comes from rounding it to 3.14 too early.

  5. 5

    Check the companion quantities

    As a sanity check, compute the full circle areas: pi times 25 is 78.53981633974483 and pi times 9 is 28.274333882308138. Subtracting the second from the first should return the ring area of 50.26548245743669, confirming the algebra. Finally find the ring width as 5 minus 3, which is 2.0 units. Agreement between the two routes means the radii, their order and the units are all consistent.

Common Questions

How does the Area Of An Annulus Calculator work?

Subtract the square of the inner radius from the square of the outer radius, then multiply by pi. With the default radii of 5 and 3 the difference of squares is 16, so the ring area is 50.26548245743669 square units. The outer circle covers 78.53981633974483, the inner circle 28.274333882308138, and the ring has a width of 2.0 units.

What do I need to enter in the Area Of An Annulus Calculator?

It takes 2 inputs: Outer radius, Inner radius. Fields that expect a unit say so next to the label.

Where does Area of the annulus come from?

It comes from A = pi * (R^2 - r^2) — the outer circle's area minus the inner circle's area, factorised. With R equal to 5 and r equal to 3 the difference of squares is 16 and the area is 50.26548245743669 square units.

What is the most common mistake with the Area Of An Annulus Calculator?

Using diameters instead of radii. The formula needs radii, so entering a diameter directly squares a number twice as large as it should be and inflates the area fourfold. If the dimensions are given across the circle, halve each one first and only then square. Writing down R and r separately before substituting makes this error easy to spot.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Area Of An Annulus page.