CCalclabhub

Science · 63 calculators

Beat Frequency Calculator

When two tones of slightly different pitch sound together, they produce a throbbing or pulsing loudness known as beats. This page turns the two frequencies into four useful numbers: how fast the beats arrive, how long each beat cycle lasts, the average pitch that is heard, and the gap between the tones as a fraction of that average. The central idea is simple, but the difference between a beat rate and a pitch is widely misunderstood, so each quantity is derived separately below.

Last updated

Beat frequency

2

Average frequency
441
Beat period
0.5
Relative difference
0.45%

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

f_beat = |f1 - f2|

f1
Frequency of the first tone
f2
Frequency of the second tone
f_beat
Beat frequency, the rate of the loudness pulses
T_beat
Beat period, the time for one complete pulse cycle

How to check the result by hand

  1. 1

    Write down the two frequencies

    Identify the frequencies of both tones and express them in the same unit, normally hertz. Check that both values are positive and that they refer to the same kind of wave. In the worked case the sources are at 440 Hz and 442 Hz, a difference of just two hertz.

  2. 2

    Subtract and take the absolute value

    Find the gap by subtracting one frequency from the other, then discard any minus sign. With 440 and 442 the difference is negative in one order and positive in the other, but the magnitude is 2 hertz either way. This magnitude is the beat frequency: two loudness pulses arrive each second.

  3. 3

    Average the two frequencies

    Add the tones and divide by two to estimate the pitch that is heard. Here 440 plus 442 is 882, and half of that is 441 Hz. This centre frequency sits between the two sources and is quite separate from the slow pulsing rate computed in the previous step.

  4. 4

    Invert the difference for the beat period

    Take the reciprocal of the beat frequency to find how long one pulse cycle lasts. One divided by 2 gives 0.5 s. Use the beat frequency here, not the average frequency, because it is the envelope that repeats twice a second rather than the underlying tone.

  5. 5

    Express the gap relative to the average

    Divide the beat frequency by the average frequency: 2 divided by 441 is 0.0045351473922902496. This is the relative difference as a raw decimal, which the display renders as roughly 0.4535 percent. Keep the decimal unmultiplied in the calculation and convert only when presenting the answer as a percentage.

Common Questions

How does the Beat Frequency Calculator work?

Subtract one frequency from the other and take the absolute value to get the beat frequency in hertz. The beat period is the reciprocal of that difference, and the average frequency is the ordinary mean of the two tones. The relative difference divides the gap by the average, giving a decimal that displays as a percentage. For tones of 440 Hz and 442 Hz the beat frequency is 2 Hz, the period is 0.5 s, the average is 441 Hz and the relative difference is 0.0045351473922902496, displayed as about 0.4535 percent.

What do I need to enter in the Beat Frequency Calculator?

It takes 2 inputs: First frequency (Hz), Second frequency (Hz). Fields that expect a unit say so next to the label.

Where does Beat frequency come from?

It comes from f_beat = |f1 - f2| — the rate of the loudness pulses equals the magnitude of the difference between the two frequencies. The absolute value removes any sign, since only the size of the gap matters.

What is the most common mistake with the Beat Frequency Calculator?

Forgetting the absolute value. Subtracting in the wrong order can return a negative beat frequency, which has no physical meaning. The gap has a size but no direction, so always take the magnitude of the difference before reporting the answer.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Beat Frequency page.