CCalclabhub

Science · 63 calculators

Centripetal Acceleration Calculator

Centripetal acceleration is the inward acceleration that keeps an object moving around a circle. It depends on the square of the speed and inversely on the radius of the path, so a small change in speed has a large effect. This page shows how to work it out from a speed and a radius, and how the same number gives the inward force needed for any mass.

Last updated

Centripetal acceleration

40

Acceleration at double the speed
160
Acceleration at half the radius
80
Inward force for a 70 kg mass
2,800

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

a = v^2 / r

a
Centripetal acceleration, in metres per second squared
v
Speed along the circular path, in metres per second
r
Radius of the circular path, in metres
F
Required inward force, in newtons
m
Mass of the object, in kilograms

How to check the result by hand

  1. 1

    Write down the speed in metres per second

    If the value is given in kilometres per hour, divide it by three point six first, because the formula needs a speed in metres per second. The speed will be squared, so take extra care with this conversion: a mistake here is amplified rather than averaged out over the calculation.

  2. 2

    Write down the radius in metres

    Use the distance from the centre of the circle to the object, measured in metres. The radius is half the diameter, so divide a quoted diameter by two. Keep this number in metres to match the speed, otherwise the units of the final answer will not come out as metres per second squared.

  3. 3

    Square the speed

    Multiply the speed by itself. With the default speed of twenty metres per second this gives four hundred. This step is where the strong dependence on speed comes from, and it is why doubling the speed multiplies the answer by four rather than merely by two. Keep the squared value to hand for the later comparisons.

  4. 4

    Divide by the radius

    Divide the squared speed by the radius. Four hundred divided by ten gives forty metres per second squared, which is the centripetal acceleration and the primary result of the calculator. Check the units at this point: (metres per second) squared divided by metres leaves metres per second squared, confirming dimensional soundness.

  5. 5

    Work out the related quantities

    Use the same numbers for the related outputs. Doubling the speed before squaring gives forty squared over ten, or one hundred and sixty. Halving the radius gives four hundred divided by five, or eighty. Multiplying the acceleration by seventy kilograms gives two thousand eight hundred newtons, the force a seventy kilogram mass needs at that acceleration.

Common Questions

How does the Centripetal Acceleration Calculator work?

Centripetal acceleration equals the square of the speed divided by the radius of the circular path. With a speed of 20 metres per second and a radius of 10 metres, the acceleration is 40 metres per second squared. Doubling the speed raises it to 160, halving the radius gives 80, and the inward force required for a 70 kilogram mass is 2800 newtons.

What do I need to enter in the Centripetal Acceleration Calculator?

It takes 2 inputs: Speed, Radius. Fields that expect a unit say so next to the label.

Where does Centripetal acceleration come from?

It comes from a = v^2 / r — the primary relation: square the speed and divide by the radius of the circular path. The acceleration points towards the centre at every instant.

What is the most common mistake with the Centripetal Acceleration Calculator?

Forgetting to square the speed. Using v divided by r instead of v squared over r is the most common error. It makes the answer far too small and destroys the key prediction that doubling speed quadruples the acceleration. Always write the square explicitly before dividing.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Centripetal Acceleration page.