CCalclabhub

Science · 63 calculations

Mechanics

How To Calculate Centripetal Acceleration

Centripetal acceleration is the inward acceleration that keeps an object moving around a circle. It depends on the square of the speed and inversely on the radius of the path, so a small change in speed has a large effect. This page shows how to work it out from a speed and a radius, and how the same number gives the inward force needed for any mass.

Last updated

Quick Answer

a = v^2 / r

a
Centripetal acceleration, in metres per second squared
v
Speed along the circular path, in metres per second
r
Radius of the circular path, in metres
F
Required inward force, in newtons
m
Mass of the object, in kilograms

Centripetal acceleration equals the square of the speed divided by the radius of the circular path. With a speed of 20 metres per second and a radius of 10 metres, the acceleration is 40 metres per second squared. Doubling the speed raises it to 160, halving the radius gives 80, and the inward force required for a 70 kilogram mass is 2800 newtons.

What Is Centripetal Acceleration?

An object moving around a circle is changing direction at every instant, even when its speed never changes. Because velocity is a vector, a change of direction is a change of velocity, and a change of velocity in time is an acceleration. For circular motion that acceleration points towards the centre of the circle, which is why it is called centripetal, from the Latin for centre-seeking. Its magnitude is the square of the speed divided by the radius of the path. Without this inward acceleration the object would not follow the circle at all: it would carry on in a straight line along the tangent, exactly as a stone released from a sling flies off. That is why circular motion needs a continuous inward influence.

The direction of the centripetal acceleration is always towards the centre, while the velocity is always along the tangent. The two are perpendicular at every instant. As the object goes round, the inward direction rotates with it, so the acceleration vector is constantly changing even though its size may be fixed. This is why uniform circular motion is still accelerated motion, and why a body in a steady orbit is not in equilibrium. A useful mental picture is to imagine the acceleration vector being dragged around the circle, always aiming at the middle and never pointing along the direction of travel. Students often expect acceleration to mean speeding up, but here it changes only the direction of the velocity while the speed stays the same throughout.

The formula follows from looking at a small step around the circle. In a short time the object turns through a small angle, and the change in its velocity is approximately the speed times that angle. The distance travelled along the arc is the radius times the same angle, and it is also the speed times the time. Combining these eliminates the angle and leaves the change in velocity per unit time equal to the speed squared divided by the radius. That derivation shows exactly why the speed appears squared: a faster object both covers more arc in a given time and turns its velocity more sharply, and the two effects multiply together. It also connects the result directly to Newton's second law, because force is mass times this acceleration, so the same reasoning governs both the motion and the cause of it.

The consequences of the square are dramatic and are worth checking against the default numbers. With a speed of twenty metres per second and a radius of ten metres, the acceleration is four hundred divided by ten, or forty metres per second squared. Double the speed to forty and the acceleration becomes sixteen hundred divided by ten, which is one hundred and sixty, four times as large. Halve the radius to five and it becomes four hundred divided by five, or eighty, twice as large. This is why a small increase in cornering speed can turn a safe turn into a skid, and why a tight bend demands far more grip than a gentle one at the same speed. Intuition built on straight-line motion tends to underestimate it badly.

Units are straightforward once the inputs are consistent. Speed should be in metres per second and radius in metres, which gives an acceleration in metres per second squared, since dividing (metres per second) squared by metres leaves metres per second squared. If a speed is quoted in kilometres per hour, divide it by three point six before using it. If a radius is quoted as a diameter, halve it first. Getting these conversions right matters more than the arithmetic, because the speed is squared and any error in it is effectively doubled. A quick dimensional check at the end catches most mistakes: if the answer does not come out in metres per second squared, something was entered in the wrong unit or the wrong quantity was used for the radius.

A circular path can also be described by its angular speed, the rate at which the radius sweeps out angle, measured in radians per second. The linear speed is the angular speed times the radius, so substituting gives a centripetal acceleration equal to the angular speed squared times the radius. In terms of the time for one full turn, the same quantity is four pi squared times the radius divided by the square of that period. These forms are useful when a problem gives a rotation rate rather than a linear speed, as with a spinning drum or a laboratory centrifuge. They are all the same physical statement written in different variables, and they convert into one another using the relationship between linear speed and angular speed and the radius of the circle.

Newton's second law turns the acceleration into the force needed to produce it. Multiply the centripetal acceleration by the mass of the object and you get the required centripetal force, directed towards the centre just like the acceleration itself. For a seventy kilogram person moving with an acceleration of forty metres per second squared the force is two thousand eight hundred newtons. This force is not a new type of force in nature; it is whatever physical interaction supplies the inward pull, such as friction between tyres and road, tension in a string, or the pull of gravity. Calling it centripetal describes the direction of the net force, not its source, and the same word applies whether the agent is a rope, a rail or a planet pulling on a satellite.

Where that inward force comes from determines whether the circular path can actually be held. A car corners because friction at the tyres points towards the centre of the turn; if the required value exceeds the available grip, the car cannot follow the curve and runs wide instead. A ball on a string is held by tension, which must be large enough to supply the value calculated here or the string goes slack and the ball flies off. A satellite is held by gravity, which weakens with distance and so fixes the speed needed for a stable orbital radius. In each case the arithmetic is identical, and the physical interpretation changes only in which force is doing the supplying. This is why the same short formula appears across such different branches of physics and engineering.

The formula has boundaries that are worth stating plainly. It assumes a fixed radius and a speed that is constant around the circle, the case called uniform circular motion. If the object is also speeding up or slowing down, there is an extra tangential acceleration and the total acceleration is the combination of the two perpendicular components. If the radius changes, as it does in a spiral or an elliptical orbit, the simple expression no longer applies at every point along the path. At speeds approaching that of light, relativistic corrections become necessary. Finally, the familiar outward centrifugal force is a fictitious effect that appears only when describing motion from a rotating viewpoint; in an ordinary stationary frame the only real acceleration is the inward one calculated above.

Formula

a = v^2 / r

Formula page →

The primary relation: square the speed and divide by the radius of the circular path. The acceleration points towards the centre at every instant.

SymbolMeaning
vSpeed along the path
rRadius of the circle
aCentripetal acceleration

a = omega^2 x r

Formula page →

When a rotation rate is given instead of a linear speed, use the angular speed in radians per second; substituting v = omega x r into the primary formula gives this form.

SymbolMeaning
omegaAngular speed
rRadius of the circle

F = m x a = m x v^2 / r

Formula page →

Newton's second law applied to circular motion. The inward force equals mass times centripetal acceleration, and points towards the centre.

SymbolMeaning
FRequired inward force
mMass of the object
aCentripetal acceleration

How To Calculate Centripetal Acceleration

  1. 1

    Write down the speed in metres per second

    If the value is given in kilometres per hour, divide it by three point six first, because the formula needs a speed in metres per second. The speed will be squared, so take extra care with this conversion: a mistake here is amplified rather than averaged out over the calculation.

  2. 2

    Write down the radius in metres

    Use the distance from the centre of the circle to the object, measured in metres. The radius is half the diameter, so divide a quoted diameter by two. Keep this number in metres to match the speed, otherwise the units of the final answer will not come out as metres per second squared.

  3. 3

    Square the speed

    Multiply the speed by itself. With the default speed of twenty metres per second this gives four hundred. This step is where the strong dependence on speed comes from, and it is why doubling the speed multiplies the answer by four rather than merely by two. Keep the squared value to hand for the later comparisons.

  4. 4

    Divide by the radius

    Divide the squared speed by the radius. Four hundred divided by ten gives forty metres per second squared, which is the centripetal acceleration and the primary result of the calculator. Check the units at this point: (metres per second) squared divided by metres leaves metres per second squared, confirming dimensional soundness.

  5. 5

    Work out the related quantities

    Use the same numbers for the related outputs. Doubling the speed before squaring gives forty squared over ten, or one hundred and sixty. Halving the radius gives four hundred divided by five, or eighty. Multiplying the acceleration by seventy kilograms gives two thousand eight hundred newtons, the force a seventy kilogram mass needs at that acceleration.

Examples

Example 1: Default case — 20 m/s around a 10 m circle

speed
20 m/s
radius
10 m
StepCalculationResult
Square the speed20 x 20400
Divide by the radius400 / 1040
Acceleration at double the speed40 x 40 / 10160
Acceleration at half the radius400 / 580
Force for a 70 kg mass70 x 402800

Result: The centripetal acceleration is 40 m/s^2; at double the speed it is 160 m/s^2, at half the radius it is 80 m/s^2, and a 70 kg mass needs an inward force of 2800 N.

Example 2: A gentle turn — 15 m/s around a 30 m circle

speed
15 m/s
radius
30 m
StepCalculationResult
Square the speed15 x 15225
Divide by the radius225 / 307.5
Acceleration at double the speed30 x 30 / 3030
Acceleration at half the radius225 / 1515
Force for a 70 kg mass70 x 7.5525

Result: At 15 m/s around a 30 m radius the acceleration is 7.5 m/s^2; doubling the speed gives 30 m/s^2, halving the radius gives 15 m/s^2, and a 70 kg mass needs 525 N.

Example 3: A tight bend — 25 m/s around a 5 m circle

speed
25 m/s
radius
5 m
StepCalculationResult
Square the speed25 x 25625
Divide by the radius625 / 5125
Acceleration at double the speed50 x 50 / 5500
Acceleration at half the radius625 / 2.5250
Force for a 70 kg mass70 x 1258750

Result: At 25 m/s around a 5 m radius the acceleration is 125 m/s^2; double the speed gives 500 m/s^2, half the radius gives 250 m/s^2, and a 70 kg mass needs 8750 N.

Calculator

Centripetal acceleration

40

Acceleration at double the speed
160
Acceleration at half the radius
80
Inward force for a 70 kg mass
2,800

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the Centripetal Acceleration calculator page.

Common Mistakes

  • Forgetting to square the speed

    Using v divided by r instead of v squared over r is the most common error. It makes the answer far too small and destroys the key prediction that doubling speed quadruples the acceleration. Always write the square explicitly before dividing.

  • Confusing the radius with the diameter

    The formula needs the distance from the centre to the object, not the distance right across the circle. Entering a diameter doubles the radius in the denominator and halves the answer, so halve any quoted diameter first.

  • Mixing up speed units

    Using kilometres per hour with a radius in metres gives a meaningless result, because the speed is squared and the unit error is magnified. Convert to metres per second by dividing by three point six before starting.

  • Assuming the acceleration vector is fixed

    For uniform circular motion the magnitude is constant but the direction rotates continuously, always pointing towards the centre. Treating it as a constant vector leads to errors when combining it with other forces or accelerations.

  • Confusing centripetal and centrifugal force

    Centripetal is the real inward net force; centrifugal is a fictitious outward effect seen only from a rotating viewpoint. Adding a centrifugal force to a free-body diagram in an inertial frame double-counts the interaction and gives the wrong answer.

  • Putting mass into the acceleration formula

    Centripetal acceleration does not depend on mass. Mass matters only when you convert the acceleration into a required force using F = m x a. Including mass in the acceleration step is a category error that changes the units and the result.

FAQ

What is centripetal acceleration?

It is the acceleration directed towards the centre that an object undergoing circular motion experiences. It changes the direction of the velocity rather than its size, and its magnitude is the speed squared divided by the radius of the path.

Why is the speed squared in the formula?

A faster object covers more arc in a given time and also turns its velocity through a larger angle in that time. These two effects multiply, so the change in velocity per second grows with the square of the speed rather than linearly.

What happens to the acceleration if I double the speed?

It becomes four times larger, because the speed is squared. Halving the radius instead doubles it. With the default values of 20 m/s and 10 m, the acceleration rises from 40 to 160 m/s^2 when the speed doubles.

Does the mass of the object affect centripetal acceleration?

No. The acceleration depends only on speed and radius. Mass affects the force required to produce that acceleration, through F = m x a, so a heavier object needs a proportionally larger inward force but has the same acceleration at the same speed.

What is the difference between centripetal and centrifugal force?

Centripetal is the real inward force that bends the path into a circle. Centrifugal is an apparent outward force that appears only if you describe the motion from a rotating frame of reference. In a stationary frame only the inward force is real.

What actually supplies the centripetal force in everyday situations?

For a cornering car it is friction between the tyres and the road; for a ball on a string it is the tension in the string; for a planet or satellite it is gravity. The word centripetal names the direction of the net force, not its physical origin.

References