Science · 63 calculators
Electric Field Strength Calculator
The electric field strength between two charged parallel plates tells you how much push a charge will feel in the space between them. It is simply the voltage across the plates divided by the distance separating them. This page walks through the formula, the force and energy it produces, and the unit conversions that catch most people out.
Last updated
Electric field strength
600
- Force on charge
- 0.6
- Field at double the distance
- 300
- Energy gained by charge
- 0.012
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
E = V / d
- E
- Electric field strength, in volts per metre (V/m)
- V
- Potential difference between the plates, in volts
- d
- Perpendicular separation of the plates, in metres
- q
- Magnitude of the test charge, in coulombs
How to check the result by hand
- 1
Read the voltage across the plates
Find the potential difference V between the two plates, in volts. This is the supply voltage if the plates are connected to a battery or power source. In the worked case it is 12 V. Make sure you use the voltage across the gap, not the rating of some other part of the circuit, and keep the sign out of it because field strength is a magnitude.
- 2
Measure the separation in metres
Measure the perpendicular distance d from one plate to the other and convert it to metres. Two centimetres becomes 0.02 m; one millimetre becomes 0.001 m. This conversion is where most errors creep in, because calculators will happily accept a centimetre value and return a number that looks reasonable but is wrong by a factor of a hundred.
- 3
Divide voltage by separation
Compute E = V / d. With 12 V and 0.02 m the field is 12 divided by 0.02, which is 600.0 V/m. The units follow from the division: volts divided by metres gives volts per metre. Check the direction of the change: a larger voltage or a smaller gap must give a larger field, so if your answer moves the other way the fraction is upside down.
- 4
Find the force and the field at a wider gap
Multiply the field by the test charge to get F = qE, so 0.001 C in 600.0 V/m feels 0.6 N. For a wider gap, divide the same voltage by the new distance: at 0.04 m the field is 300.0 V/m, exactly half the original. Notice that the charge plays no part in the field itself; it only affects the force that the field produces.
- 5
Work out the energy transferred
Multiply the voltage by the charge to get W = qV, which is 12 multiplied by 0.001, or 0.012 J. As a cross-check, multiply the force by the distance: 0.6 N times 0.02 m also gives 0.012 J. Agreement between the two routes confirms that the field, force and distance are all consistent with one another.
Common Questions
How does the Electric Field Strength Calculator work?
Divide the potential difference between the plates by their separation to get the electric field strength in volts per metre. Multiply by a test charge to find the force on it, and multiply the voltage by the charge to find the energy transferred. With 12 V across plates 0.02 m apart, the field is 600.0 V/m.
What do I need to enter in the Electric Field Strength Calculator?
It takes 3 inputs: Potential difference (V), Plate separation (m), Test charge (C). Fields that expect a unit say so next to the label.
Where does Electric field strength come from?
It comes from E = V / d — the potential difference divided by the perpendicular plate separation. Doubling V doubles the field; doubling d halves it.
What is the most common mistake with the Electric Field Strength Calculator?
Confusing field strength with force. Field strength is force per unit charge, measured in V/m or N/C, while force is measured in newtons. Asking for the field and answering in newtons mixes two different quantities. Multiply by a charge only when the question asks for the force on that specific charge.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Electric Field Strength page.
