CCalclabhub

Science · 63 calculators

Electric Potential Energy Calculator

Electric potential energy is the energy stored by a charge because of where it sits in an electric potential. It is found by multiplying the charge in coulombs by the potential in volts, which gives a result in joules. This page shows how to work it out, why the relation is linear in both quantities, and how to avoid the usual unit and sign errors.

Last updated

Electric potential energy

24

Energy at double the charge
48
Energy at half the potential
12
Charge needed for 24 joules
2

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

U = q x V

U
Electric potential energy, in joules
q
Electric charge, in coulombs
V
Electric potential at the position of the charge, in volts

How to check the result by hand

  1. 1

    Write down the charge in coulombs

    Take the charge q in coulombs and keep its sign. If the value is given in microcoulombs or millicoulombs, convert it first by multiplying by one millionth or one thousandth respectively. The sign matters because a negative charge at a positive potential stores negative energy, and discarding it reverses the direction of any energy transfer you go on to predict.

  2. 2

    Write down the potential in volts

    Take the electric potential V at the position of the charge, measured relative to a stated reference such as the ground terminal of a circuit. One volt is one joule per coulomb, so this number is the energy available to each coulomb of charge at that point. Potential differences are what can be measured directly, so make sure the quoted value refers to the same zero as any other value you compare it with.

  3. 3

    Multiply charge by potential

    Multiply q by V to obtain the electric potential energy in joules. With the default charge of two coulombs and potential of twelve volts, the product is twenty-four joules. There is no squaring and no conversion constant in this step: coulombs times volts is already joules. Check the size of the answer against the one-joule-per-coulomb-per-volt definition as a quick guard against a stray factor of a thousand.

  4. 4

    Check the scaling cases

    Because the relation is linear in both inputs, the related results follow without new arithmetic. Doubling the charge to four coulombs at twelve volts gives forty-eight joules, and halving the potential to six volts with the original charge gives twelve joules. If either of these does not come out as exactly double or half the main answer, an input has been entered incorrectly or an extra factor has crept into the calculation.

  5. 5

    Solve the inverse question

    To find the charge needed for a chosen energy, divide that energy by the potential. For a target of twenty-four joules at twelve volts, twenty-four divided by twelve gives two coulombs, which matches the original input and confirms the arithmetic. This rearrangement is the same relation read backwards, so it inherits the same units and the same dependence on the sign convention used for the potential.

Common Questions

How does the Electric Potential Energy Calculator work?

Multiply the charge by the electric potential at its location. A charge of two coulombs at a potential of twelve volts stores twenty-four joules. Doubling the charge doubles the energy to forty-eight joules, halving the potential gives twelve joules, and a charge of two coulombs is needed to store twenty-four joules at twelve volts.

What do I need to enter in the Electric Potential Energy Calculator?

It takes 2 inputs: Charge, Electric potential. Fields that expect a unit say so next to the label.

Where does Electric potential energy come from?

It comes from U = q x V — the primary relation. Multiply the charge by the electric potential at its location. Coulombs times volts gives joules directly, with no conversion factor.

What is the most common mistake with the Electric Potential Energy Calculator?

Confusing potential with potential energy. Potential is energy per unit charge and is measured in volts, while potential energy is the total energy of a particular charge and is measured in joules. Multiplying them is the step that converts one to the other, so treating a voltage directly as an energy leaves out the charge entirely.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Electric Potential Energy page.