CCalclabhub

Science · 63 calculators

Kinetic Friction Calculator

Kinetic friction is the force that resists an object already sliding across a surface. This calculation turns the coefficient of friction and the normal force into that force, then extends it to the resulting deceleration and stopping time.

Last updated

Kinetic friction force

147.15

Friction at double the mass
294.3
Deceleration from friction
2.943
Stopping time from 10 m/s
3.3979

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

The formula this calculator uses

F = mu x N, with N = m x g on flat ground

F
Kinetic friction force
mu
Coefficient of kinetic friction
N
Normal force
m
Mass of the sliding object
g
Acceleration due to gravity, about 9.81

How to check the result by hand

  1. 1

    Find the normal force

    On level ground with no other vertical forces, multiply the mass by gravitational acceleration. A 50 kilogram mass gives 50 times 9.81, or 490.5 newtons. If the surface is inclined or an extra upward or downward force is present, this simple product no longer applies.

  2. 2

    Identify the coefficient of kinetic friction

    Choose the coefficient for the two surfaces that are actually sliding, not the larger static coefficient for surfaces at rest. The worked value is 0.3, a dimensionless number, so it carries no units and must not be expressed as a percentage here.

  3. 3

    Multiply coefficient by normal force

    Compute mu times N to obtain the friction force. With a coefficient of 0.3 and a normal force of 490.5 newtons, the force resisting the slide is 147.15 newtons, directed opposite to the motion.

  4. 4

    Work out the deceleration

    Divide the friction force by the mass, or use the equivalent shortcut mu times g. With a coefficient of 0.3 this gives 2.943 metres per second squared. Notice that the mass cancels, so the same deceleration applies to any mass on the same surface.

  5. 5

    Find the stopping time

    Divide the starting speed by the deceleration. Ten metres per second divided by 2.943 gives 3.397893306150187 seconds. Doubling the mass leaves the stopping time unchanged, though the friction force itself doubles to 294.3 newtons.

Common Questions

How does the Kinetic Friction Calculator work?

Multiply the coefficient of kinetic friction by the normal force. On level ground the normal force equals mass times gravitational acceleration, so for a 50 kilogram mass and a coefficient of 0.3 the friction force is 147.15 newtons. Doubling the mass doubles it to 294.3 newtons, the associated deceleration is 2.943 metres per second squared, and a body starting at 10 metres per second stops in 3.397893306150187 seconds.

What do I need to enter in the Kinetic Friction Calculator?

It takes 2 inputs: Mass of the object, Coefficient of kinetic friction. Fields that expect a unit say so next to the label.

Where does Kinetic friction force come from?

It comes from F = mu x N — the friction force during sliding equals the coefficient of kinetic friction multiplied by the normal force. Both factors scale it linearly, and the force acts opposite to the motion.

What is the most common mistake with the Kinetic Friction Calculator?

Using the static coefficient instead of the kinetic one. The static coefficient applies only before sliding begins and is usually larger. Once the object is moving, the kinetic coefficient governs the force, so using the static value overstates the friction and the resulting deceleration.

For worked examples, common mistakes and the limits of this formula, read the full How To Calculate Kinetic Friction page.