Mechanics
How To Calculate Kinetic Friction
Kinetic friction is the force that resists an object already sliding across a surface. This calculation turns the coefficient of friction and the normal force into that force, then extends it to the resulting deceleration and stopping time.
Last updated
Quick Answer
F = mu x N, with N = m x g on flat ground
- F
- Kinetic friction force
- mu
- Coefficient of kinetic friction
- N
- Normal force
- m
- Mass of the sliding object
- g
- Acceleration due to gravity, about 9.81
Multiply the coefficient of kinetic friction by the normal force. On level ground the normal force equals mass times gravitational acceleration, so for a 50 kilogram mass and a coefficient of 0.3 the friction force is 147.15 newtons. Doubling the mass doubles it to 294.3 newtons, the associated deceleration is 2.943 metres per second squared, and a body starting at 10 metres per second stops in 3.397893306150187 seconds.
What Is Kinetic Friction?
Kinetic friction is the contact force that opposes an object which is already sliding over a surface. It is distinct from static friction, the force that prevents a stationary object from starting to move. The kinetic force is modelled as the coefficient of kinetic friction multiplied by the normal force pressing the two surfaces together. For a mass of 50 kilograms sliding on level ground with a coefficient of 0.3, that force comes to 147.15 newtons. It is a resistive force: it always points opposite to the direction of motion and never helps the slide along.
The coefficient of kinetic friction, usually written as the Greek letter mu, is a dimensionless number that encodes how the two materials interact. Rubber on dry concrete gives a high value near one, while steel on ice gives a very low one. A value of 0.3 is typical of wood sliding on wood or smooth metal on metal. It is an empirical quantity measured by experiment rather than derived from first principles, and it depends on surface finish, temperature and even sliding speed, so tabulated values should be treated as guides rather than exact constants.
The normal force is the perpendicular push a surface exerts on an object resting on it. On a flat horizontal surface with no other vertical forces, it exactly balances the weight, so it equals mass times gravitational acceleration. This is why the normal force for a 50 kilogram object is 50 times 9.81, or 490.5 newtons. On a slope the normal force is only the component of weight perpendicular to the surface, and on a banked or accelerating surface it can differ further, so the shortcut of using mass times gravity is valid only for level ground.
Friction scales with both of its inputs, which is the central practical message of this calculation. Increase the coefficient and the force rises in direct proportion; increase the mass and the normal force rises with it, so the friction rises too. Doubling the mass in the worked example raises the friction from 147.15 to 294.3 newtons. One counterintuitive consequence is that the contact area does not appear in the formula: a wide block and a narrow block of the same mass sliding on the same surface experience the same friction, because the pressure per unit area adjusts to compensate.
The deceleration caused by friction follows from Newton's second law. Dividing the friction force by the mass gives mu times mass times gravity over mass, and the mass cancels, leaving a deceleration of mu times gravity. With a coefficient of 0.3 that is 2.943 metres per second squared, entirely independent of how heavy the object is. This explains why a heavy crate and a light crate sliding at the same speed on the same floor come to rest over the same distance, provided the coefficient is genuinely the same for both.
Stopping time follows directly from that deceleration. If a body starts at a speed v and slows uniformly at a rate a, the time to reach rest is v divided by a. Substituting the friction deceleration gives a stopping time of v over mu times g. From a starting speed of 10 metres per second with a coefficient of 0.3, the result is 3.397893306150187 seconds. The matching stopping distance is about 16.99 metres, obtained from speed squared over twice the deceleration, and both figures assume the kinetic coefficient stays constant throughout the slide.
The number 9.81 used here is an approximate value of gravitational acceleration near the Earth's surface. It varies slightly with latitude, altitude and local geology, and it is very different on another world, so the friction force on Mars would not be the same even for identical materials. Air resistance is another omission: for fast or lightweight objects, drag can dominate over surface friction. The kinetic friction model is a useful linear approximation, not a complete description of tribology, and real measurements often show more complicated behaviour. Surface wear, lubrication and microscopic roughness all change the coefficient over time, so a value that was accurate when the surfaces were new may no longer apply.
Static friction deserves a clear contrast because it is frequently confused with the kinetic kind. Before an object moves, static friction adjusts to match whatever horizontal force is applied, up to a maximum of the static coefficient times the normal force. Only once that threshold is exceeded does sliding begin and the smaller kinetic coefficient take over. This is why it takes more effort to start pushing a heavy box than to keep it moving, and why the calculated 147.15 newtons describes the motion after the box has already broken free.
The calculation appears throughout mechanics and engineering. It sets braking distances, determines whether a load will stay put on a moving lorry, governs the motion of a block sliding down a ramp, and underpins simple models of skiing or skidding. Because the deceleration is independent of mass, designers often reason in terms of the coefficient alone when estimating how quickly something will stop. Combined with the related ideas of work and energy, kinetic friction is one of the first places where an abstract force law meets a tangible, measurable outcome. Because sliding friction converts motion into heat, the same calculation also estimates the energy dissipated as a block comes to rest.
Formula
F = mu x N
Formula page →The friction force during sliding equals the coefficient of kinetic friction multiplied by the normal force. Both factors scale it linearly, and the force acts opposite to the motion.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| F | Kinetic friction force | N | 147.15 newtons in the main worked example. |
| mu | Coefficient of kinetic friction | dimensionless | Dimensionless material property, 0.3 here. |
| N | Normal force | N | 490.5 newtons for a 50 kilogram mass on level ground. |
N = m x g
Formula page →For a horizontal surface with no other vertical forces, the normal force balances the weight. This is the value that feeds directly into the friction force formula on this page.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| N | Normal force | N | The perpendicular contact force from the surface. |
| m | Mass | kg | 50 kilograms in the worked example. |
| g | Gravitational acceleration | m/s^2 | Approximately 9.81 metres per second squared near the Earth's surface. |
t = v / (mu x g)
Formula page →Friction produces a deceleration of mu times g, independent of mass. Dividing a starting speed by that deceleration gives the time needed to come to rest under sliding friction.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| t | Stopping time | s | 3.397893306150187 seconds from a speed of 10 metres per second. |
| v | Starting speed | m/s | 10 metres per second in the worked example. |
| mu | Coefficient of kinetic friction | dimensionless | 0.3 gives a deceleration of 2.943 metres per second squared. |
How To Calculate Kinetic Friction
- 1
Find the normal force
On level ground with no other vertical forces, multiply the mass by gravitational acceleration. A 50 kilogram mass gives 50 times 9.81, or 490.5 newtons. If the surface is inclined or an extra upward or downward force is present, this simple product no longer applies.
- 2
Identify the coefficient of kinetic friction
Choose the coefficient for the two surfaces that are actually sliding, not the larger static coefficient for surfaces at rest. The worked value is 0.3, a dimensionless number, so it carries no units and must not be expressed as a percentage here.
- 3
Multiply coefficient by normal force
Compute mu times N to obtain the friction force. With a coefficient of 0.3 and a normal force of 490.5 newtons, the force resisting the slide is 147.15 newtons, directed opposite to the motion.
- 4
Work out the deceleration
Divide the friction force by the mass, or use the equivalent shortcut mu times g. With a coefficient of 0.3 this gives 2.943 metres per second squared. Notice that the mass cancels, so the same deceleration applies to any mass on the same surface.
- 5
Find the stopping time
Divide the starting speed by the deceleration. Ten metres per second divided by 2.943 gives 3.397893306150187 seconds. Doubling the mass leaves the stopping time unchanged, though the friction force itself doubles to 294.3 newtons.
Examples
Example 1: Friction on a sliding 50 kilogram crate
- mass
- 50 kg
- coefficient
- 0.3
| Step | Calculation | Result |
|---|---|---|
| Normal force | 50 x 9.81 | 490.5 N |
| Friction force | 0.3 x 490.5 | 147.15 N |
Result: 147.15 newtons of kinetic friction resisting the motion of the crate.
Example 2: What doubling the mass does
- mass
- 100 kg
- coefficient
- 0.3
| Step | Calculation | Result |
|---|---|---|
| Friction at the original mass | 0.3 x 50 x 9.81 | 147.15 N |
| Normal force at double the mass | 100 x 9.81 | 981 N |
| Friction at double the mass | 0.3 x 981 | 294.3 N |
Result: 294.3 newtons, exactly twice the original 147.15 newtons, because friction is proportional to mass.
Example 3: Stopping from 10 metres per second
- mass
- 50 kg
- coefficient
- 0.3
| Step | Calculation | Result |
|---|---|---|
| Deceleration | 0.3 x 9.81 | 2.943 m/s^2 |
| Starting speed | given speed | 10 m/s |
| Stopping time | 10 / 2.943 | 3.397893306150187 s |
Result: 3.397893306150187 seconds to stop from 10 metres per second, regardless of the sliding mass.
Calculator
Kinetic friction force
147.15
- Friction at double the mass
- 294.3
- Deceleration from friction
- 2.943
- Stopping time from 10 m/s
- 3.3979
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
Prefer a full-width tool? Open the Kinetic Friction calculator page.
Common Mistakes
Using the static coefficient instead of the kinetic one
The static coefficient applies only before sliding begins and is usually larger. Once the object is moving, the kinetic coefficient governs the force, so using the static value overstates the friction and the resulting deceleration.
Treating mass as the normal force
Mass in kilograms is not a force. On level ground you must multiply by gravity to get 490.5 newtons for a 50 kilogram mass. On an incline the normal force is smaller still, being only the perpendicular component of the weight.
Assuming contact area changes the friction
The linear friction model has no area term. A block resting on its broad face and on its narrow edge experiences the same friction, because a smaller contact area means a proportionally larger pressure. Resist the intuition that more surface means more grip.
Treating the coefficient as a universal constant
Values depend on materials, roughness, temperature and speed. A tabulated coefficient of 0.3 is an approximation, and real surfaces may deviate enough to matter. Where safety is involved, measure or use a conservative value.
Forgetting that mass cancels from the deceleration
Because friction is proportional to mass, dividing by mass removes it. The deceleration is simply mu times g, 2.943 metres per second squared here. Carrying the mass through and failing to cancel leads to a stopping time that wrongly depends on weight.
Mixing speed units when finding stopping time
The coefficient and gravity are in SI units, so the starting speed must be in metres per second. Entering 10 kilometres per hour as though it were 10 metres per second would give a stopping time far too long. Convert first, then divide.
FAQ
What is the difference between static and kinetic friction?
Static friction acts on a surface that is not yet sliding and adjusts up to a maximum threshold. Kinetic friction acts once sliding has begun and is usually smaller, which is why it takes more force to start moving a box than to keep it moving.
Does a larger contact area produce more friction?
No, not in the standard model. Friction depends on the normal force and the coefficient, not on the apparent area of contact. Spreading the same weight over a larger area lowers the pressure at each point by just enough to offset the extra area.
Why does the mass disappear from the deceleration?
A heavier object has proportionally more friction but also proportionally more inertia. The two effects cancel exactly, leaving a deceleration of mu times g, or 2.943 metres per second squared for a coefficient of 0.3.
What is a typical value of the coefficient?
It ranges from near zero for very slippery surfaces such as ice to around one for rubber on dry concrete. A value of 0.3 is a reasonable middle figure for wood on wood or smooth metal, but tabulated numbers are only guides.
How long does it take to stop from 10 metres per second?
With a coefficient of 0.3 the deceleration is 2.943 metres per second squared, so the stopping time is 10 divided by that value, or 3.397893306150187 seconds. This assumes level ground and no air resistance.
Does the same formula work on a slope?
The friction law itself still holds, but the normal force changes. On an incline it is the mass times gravity times the cosine of the slope angle, and a component of weight now acts along the surface as well. Use that smaller normal force in the friction calculation.
References
- [1], Friction — https://en.wikipedia.org/wiki/Friction
- [2], Normal force — https://en.wikipedia.org/wiki/Normal_force
- [3], Newton's laws of motion — https://en.wikipedia.org/wiki/Newton%27s_laws_of_motion
