Math · 75 calculators
Surface Area Of A Rectangular Prism Calculator
The surface area of a rectangular prism tells you how much material covers all six of its rectangular faces. It is the sum of the areas of three pairs of identical faces, written compactly as 2(lw + lh + wh). This page shows where that formula comes from, how it differs from lateral area and volume, and how to apply it without mixing up your units.
Last updated
Total surface area
94
- Volume
- 60
- Lateral surface area
- 70
- Base area
- 12
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
The formula this calculator uses
SA = 2(lw + lh + wh)
- l
- Length of the prism
- w
- Width of the prism
- h
- Height of the prism
- SA
- Total surface area, in square units
How to check the result by hand
- 1
Fix the three dimensions and their units
Write down the length, width and height, and make sure every one is expressed in the same unit before you begin. If the length is in metres and the width in centimetres, convert first, because the formula multiplies the numbers together and mixed units produce a meaningless area. Decide which face you are calling the base; conventionally it is the length by width rectangle.
- 2
Find the area of each distinct face pair
Compute the three products lw, lh and wh. With length 4, width 3 and height 5 these are 12, 20 and 15 square units. Each product is the area of one face, and because opposite faces match, each actually represents two identical faces of the solid.
- 3
Add the three areas and double
Add the three face areas to get one of each pair, then multiply the sum by two. In the worked case the sum is 12 plus 20 plus 15, which is 47, and doubling gives a total surface area of 94 square units. Skipping the doubling is the single most frequent error, and it reports the area of only half the faces.
- 4
Derive the lateral area and base area if required
For the four side faces only, add two times lh and two times wh, which gives 70 square units for the default prism. The base area is simply lw, or 12 square units. Total surface area always exceeds lateral area by exactly twice the base area, so 94 minus 70 equals 24, which is two times 12 — a handy way to check your arithmetic.
- 5
Check units and sanity-check the result
Label the answer in square units and, if needed, compute the volume separately as l times w times h, here 60 cubic units, to confirm you have not mixed the two ideas. A quick reasonableness check is to compare with a cube of similar size: a shape around four or five units across should have a surface area in the tens or low hundreds, not in the thousands. If your figure is wildly out, look for a unit slip or a missing second face.
Common Questions
How does the Surface Area Of A Rectangular Prism Calculator work?
Find the area of each of the three distinct face types — length times width, length times height and width times height — add them together, then double the total. For a prism measuring 4 by 3 by 5 units the three face areas are 12, 20 and 15, their sum is 47, and the total surface area is 94 square units. The lateral area, which leaves off the top and bottom, is 70 square units and the enclosed volume is 60 cubic units.
What do I need to enter in the Surface Area Of A Rectangular Prism Calculator?
It takes 3 inputs: Length, Width, Height. Fields that expect a unit say so next to the label.
Where does Total surface area come from?
It comes from SA = 2(lw + lh + wh) — add the areas of the three distinct face pairs — length times width, length times height and width times height — and double the sum. The base area lw is one of those three terms.
What is the most common mistake with the Surface Area Of A Rectangular Prism Calculator?
Forgetting to double the sum. Adding lw + lh + wh gives the area of only one face from each pair. The full surface area is twice that sum. For the default prism the three terms total 47, but the correct answer is 94; the forgotten factor of two is the most common error on this topic.
For worked examples, common mistakes and the limits of this formula, read the full How To Calculate The Surface Area Of A Rectangular Prism page.
