Geometry
How To Calculate The Surface Area Of A Rectangular Prism
The surface area of a rectangular prism tells you how much material covers all six of its rectangular faces. It is the sum of the areas of three pairs of identical faces, written compactly as 2(lw + lh + wh). This page shows where that formula comes from, how it differs from lateral area and volume, and how to apply it without mixing up your units.
Last updated
Quick Answer
SA = 2(lw + lh + wh)
- l
- Length of the prism
- w
- Width of the prism
- h
- Height of the prism
- SA
- Total surface area, in square units
Find the area of each of the three distinct face types — length times width, length times height and width times height — add them together, then double the total. For a prism measuring 4 by 3 by 5 units the three face areas are 12, 20 and 15, their sum is 47, and the total surface area is 94 square units. The lateral area, which leaves off the top and bottom, is 70 square units and the enclosed volume is 60 cubic units.
What Is The Surface Area Of A Rectangular Prism?
A rectangular prism, also called a cuboid or a rectangular box, is a solid bounded by six flat rectangular faces. Opposite faces are equal and parallel, and the shape has eight corners and twelve edges. Because the three edge lengths may all differ, the six faces come in three identical pairs rather than in one uniform set as they do for a cube. Recognising those three pairs is the whole idea behind the surface area formula.
The total surface area is simply the combined area of all six faces. A rectangle has area equal to its two side lengths multiplied together, so the face at the top and bottom has area length times width, the front and back have area length times height, and the two ends have area width times height. Adding the three distinct face areas gives the area of one of each pair; doubling that sum accounts for both members of every pair. The result is the compact expression two times the quantity lw plus lh plus wh.
That shortcut is worth understanding rather than memorising blindly. If you unfold the prism into a flat net, you see six rectangles laid out in a cross: two of size lw, two of size lh and two of size wh. The formula merely groups like rectangles before adding, which is faster and less prone to missing a face than measuring each of the six separately. A net is still a useful sanity check when you are unsure whether a particular face belongs to the total.
Lateral surface area is a different quantity that appears whenever the top and bottom do not need covering. It is the sum of the four faces that stand around the sides, which works out to two times lh plus two times wh, or equivalently two times h times the quantity l plus w. Imagine painting the walls of a room but not the ceiling or floor: you are calculating lateral area. For the default prism of 4 by 3 by 5, that comes to 70 square units, noticeably less than the full 94.
The base area is the area of one end face, length times width, which is 12 square units in the worked case. It appears inside the total surface area formula as one of the three terms, and it is the figure you multiply by height when you want the volume. Confusing base area with total surface area is common, because both describe the same footprint; the distinction is that the base covers one face while the surface covers all six.
Surface area and volume answer different questions and carry different units. Surface area is measured in square units because it counts the coating on the outside, while volume is measured in cubic units because it counts the space enclosed. For the default prism the volume is 60 cubic units alongside a surface area of 94 square units. No amount of arithmetic can turn one into the other, and writing the answer in the wrong units is an error even when the number happens to be right.
A useful relationship to keep in mind is what happens when a single dimension changes. Doubling one dimension does not double the whole surface area: it adds the areas of the two pairs of faces that involve that dimension, while the opposite pair stays exactly the same. Stretch the length of the 4 by 3 by 5 prism from 4 to 8 and the surface area rises from 94 to 158, an increase of 64, rather than to 188. The reason is that only four of the six faces grow.
The same idea explains why surface-area ratios behave as they do in scaling. Enlarging every dimension by a factor of k multiplies all face areas by k squared and the volume by k cubed, so surface area grows more slowly than capacity. This is why large boxes use proportionally less cardboard per litre of contents than small ones, and why small warm objects lose heat faster relative to their size. The principle is the same one that governs cubes and spheres.
In practice the formula turns up in packaging, painting, tiling, shipping and any job where you must cover or wrap a box. A real project usually needs a little extra for seams, overlap and waste, so the mathematical surface area is a lower bound rather than an exact shopping list. The number also assumes a perfect rectangular box: a lid, a lip or a folded flap adds faces of its own. Treat the result as the clean geometric starting point, then add a practical allowance on top.
Formula
SA = 2(lw + lh + wh)
Formula page →Add the areas of the three distinct face pairs — length times width, length times height and width times height — and double the sum. The base area lw is one of those three terms.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| l | Length | length units | The longest horizontal edge of the prism. |
| w | Width | length units | The shorter horizontal edge, forming the base with the length. |
| h | Height | length units | The vertical edge joining the two bases. |
LSA = 2lh + 2wh = 2h(l + w)
Formula page →Add only the four upright faces, excluding the top and bottom. Equivalently, multiply the height by the perimeter of the base.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| l | Length | length units | One edge of the rectangular base. |
| w | Width | length units | The other edge of the rectangular base. |
| h | Height | length units | The distance between the two excluded bases. |
V = lwh
Formula page →Multiply the base area lw by the height to get the enclosed space, measured in cubic units rather than square units.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| l | Length | length units | One dimension of the base. |
| w | Width | length units | The other dimension of the base. |
| h | Height | length units | The depth of the prism above its base. |
How To Calculate The Surface Area Of A Rectangular Prism
- 1
Fix the three dimensions and their units
Write down the length, width and height, and make sure every one is expressed in the same unit before you begin. If the length is in metres and the width in centimetres, convert first, because the formula multiplies the numbers together and mixed units produce a meaningless area. Decide which face you are calling the base; conventionally it is the length by width rectangle.
- 2
Find the area of each distinct face pair
Compute the three products lw, lh and wh. With length 4, width 3 and height 5 these are 12, 20 and 15 square units. Each product is the area of one face, and because opposite faces match, each actually represents two identical faces of the solid.
- 3
Add the three areas and double
Add the three face areas to get one of each pair, then multiply the sum by two. In the worked case the sum is 12 plus 20 plus 15, which is 47, and doubling gives a total surface area of 94 square units. Skipping the doubling is the single most frequent error, and it reports the area of only half the faces.
- 4
Derive the lateral area and base area if required
For the four side faces only, add two times lh and two times wh, which gives 70 square units for the default prism. The base area is simply lw, or 12 square units. Total surface area always exceeds lateral area by exactly twice the base area, so 94 minus 70 equals 24, which is two times 12 — a handy way to check your arithmetic.
- 5
Check units and sanity-check the result
Label the answer in square units and, if needed, compute the volume separately as l times w times h, here 60 cubic units, to confirm you have not mixed the two ideas. A quick reasonableness check is to compare with a cube of similar size: a shape around four or five units across should have a surface area in the tens or low hundreds, not in the thousands. If your figure is wildly out, look for a unit slip or a missing second face.
Examples
Example 1: The default prism: 4 by 3 by 5
- length
- 4
- width
- 3
- height
- 5
| Step | Calculation | Result |
|---|---|---|
| Area of the top and bottom faces | length x width = 4 x 3 | 12.0 |
| Area of the front and back faces | length x height = 4 x 5 | 20.0 |
| Area of the two end faces | width x height = 3 x 5 | 15.0 |
| Sum of the three distinct face areas | 12 + 20 + 15 | 47.0 |
| Total surface area | 2 x 47 | 94.0 |
Result: A prism of length 4, width 3 and height 5 has a total surface area of 94.0 square units. Its lateral area is 70.0 square units, its base area is 12.0 square units and its volume is 60.0 cubic units.
Example 2: A larger carton: 10 by 6 by 4
- length
- 10
- width
- 6
- height
- 4
| Step | Calculation | Result |
|---|---|---|
| Area of the top and bottom faces | length x width = 10 x 6 | 60.0 |
| Area of the front and back faces | length x height = 10 x 4 | 40.0 |
| Area of the two end faces | width x height = 6 x 4 | 24.0 |
| Sum of the three distinct face areas | 60 + 40 + 24 | 124.0 |
| Total surface area | 2 x 124 | 248.0 |
Result: The carton needs 248.0 square units of material for all six faces. Its volume is 240.0 cubic units, its lateral area is 128.0 square units and each base covers 60.0 square units.
Example 3: A tall square-based column: 5 by 5 by 10
- length
- 5
- width
- 5
- height
- 10
| Step | Calculation | Result |
|---|---|---|
| Area of the top and bottom faces | length x width = 5 x 5 | 25.0 |
| Area of the front and back faces | length x height = 5 x 10 | 50.0 |
| Area of the two end faces | width x height = 5 x 10 | 50.0 |
| Sum of the three distinct face areas | 25 + 50 + 50 | 125.0 |
| Total surface area | 2 x 125 | 250.0 |
Result: The column has a total surface area of 250.0 square units. Its four upright faces contribute 200.0 square units of lateral area, the two square bases are 25.0 square units each, and the volume is 250.0 cubic units.
Calculator
Total surface area
94
- Volume
- 60
- Lateral surface area
- 70
- Base area
- 12
Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.
Prefer a full-width tool? Open the The Surface Area Of A Rectangular Prism calculator page.
Common Mistakes
Forgetting to double the sum
Adding lw + lh + wh gives the area of only one face from each pair. The full surface area is twice that sum. For the default prism the three terms total 47, but the correct answer is 94; the forgotten factor of two is the most common error on this topic.
Confusing total with lateral surface area
Lateral area excludes the top and bottom and equals 2lh + 2wh, which is 70 for the default prism rather than 94. Read the question carefully: a problem about wrapping a whole box wants the total, while one about painting four walls wants the lateral figure.
Mixing length units before multiplying
If the length is measured in metres and the width in centimetres, multiplying them directly produces a nonsense area. Convert every dimension to a single unit first, and remember that converting the final area from square centimetres to square metres divides by 10,000, not by 100.
Confusing surface area with volume
Surface area uses square units and counts the outside covering; volume uses cubic units and counts the space inside. The two are 94 and 60 respectively in the worked example. Writing cubic units on an area answer is a dimensional mistake even if the number is right.
Double-counting faces when using a net
A net already shows all six rectangles, so if you add the net's rectangles and then also multiply by two you will double the answer. Use either the three-term formula with its factor of two, or sum the six rectangles in the net — never both.
Assuming doubling one edge doubles the surface area
Stretching a single dimension changes only the four faces that contain it; the opposite pair is unchanged. Going from a length of 4 to 8 raises the area from 94 to 158, not to 188. Only scaling all three dimensions by the same factor squares that factor in the area.
FAQ
What is the formula for the surface area of a rectangular prism?
It is 2(lw + lh + wh), where l, w and h are the length, width and height. You find the area of each of the three distinct face types, add them and double the total to account for the opposite faces.
How many faces does a rectangular prism have?
Six, arranged in three pairs of equal rectangles: top and bottom, front and back, and the two ends. That is why the surface formula has three terms inside the brackets and a factor of two outside.
What is the difference between total and lateral surface area?
Total surface area covers all six faces, while lateral area covers only the four side faces and leaves out the top and bottom. The total always exceeds the lateral figure by twice the base area.
Does the same formula work for a cube?
Yes. Setting l = w = h = s turns 2(lw + lh + wh) into 2(s squared + s squared + s squared), which simplifies to 6s squared. The cube is simply the special case where all three dimensions match.
What units should I use for the answer?
Square units of whatever length unit you measured in: square centimetres for centimetres, square metres for metres. Volume, by contrast, is in cubic units. Converting an area needs the square of the linear conversion factor.
Why do we multiply by two in the surface area formula?
Because every face has an identical opposite partner. The three products inside the brackets give one face of each type, and doubling counts its partner as well. Without the two you would have covered only half the box.
References
- [1], Cuboid — https://en.wikipedia.org/wiki/Cuboid
- [2], Surface area — https://en.wikipedia.org/wiki/Surface_area
- [3], Volume — https://en.wikipedia.org/wiki/Volume
