CCalclabhub

Fluid Mechanics

Reynolds number

The defining relation. Multiply density, speed and characteristic length, then divide by dynamic viscosity. All four quantities use consistent SI units so the result is dimensionless.

Last updated

The Formula

Re = rho v L / mu

The defining relation. Multiply density, speed and characteristic length, then divide by dynamic viscosity. All four quantities use consistent SI units so the result is dimensionless.

SymbolMeaning
rhoFluid density
vFlow speed
LCharacteristic length
muDynamic viscosity

What Each Symbol Means

rhokg/m^3

Fluid density

Mass per unit volume, in kilograms per cubic metre.

vm/s

Flow speed

Mean speed of the fluid relative to the body.

Lm

Characteristic length

A representative dimension such as pipe diameter.

muPa·s

Dynamic viscosity

The fluid's resistance to shearing, in pascal-seconds.

See It Worked With Real Numbers

A formula on its own does not tell you which number goes where. The how to calculate the reynolds number page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.

Where This Formula Appears

This equation is the working core of How To Calculate The Reynolds Number, filed under Science. Every number the guide produces comes from substituting into this one line.

Common Questions

What is the formula for Reynolds number?

The formula for Reynolds number is Re = rho v L / mu. The defining relation. Multiply density, speed and characteristic length, then divide by dynamic viscosity. All four quantities use consistent SI units so the result is dimensionless.

What does each symbol in Reynolds number stand for?

rho is fluid density; v is flow speed; L is characteristic length; mu is dynamic viscosity.

What units should I use with Reynolds number?

Substitute rho in kg/m^3, v in m/s, L in metres, mu in Pa·s. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.

What is a common mistake when using Reynolds number?

Using inconsistent units. The expression assumes SI units throughout: kilograms per cubic metre, metres per second, metres and pascal-seconds. Entering the length in millimetres while leaving the other terms in SI units produces an answer a thousand times too large, and the dimensionless result will silently look plausible.