CCalclabhub

Math · 75 calculations

Geometry

How To Calculate The Area Of A Circle Sector

A circle sector is the slice cut out by two radii and the arc that joins their ends. Because it is simply a fraction of a complete circle, its area follows from one proportion: the central angle divided by 360 degrees. This page sets out that degrees convention explicitly, shows how the same fraction gives the arc length, and works through the numbers with a radius of 10 and an angle of 60 degrees.

Last updated

Quick Answer

Sector area A = (θ / 360) × πr²; arc length L = (θ / 360) × 2πr

θ
Central angle between the two radii, measured in degrees
r
Radius of the circle, measured in ordinary length units
A
Area of the sector, in square units
L
Arc length along the curved boundary of the sector

A sector occupies the same share of a circle's area as its central angle occupies of a full 360 degree turn. Multiply the full circle area πr² by θ/360 to get the sector area, and multiply the circumference 2πr by the same fraction to get the arc length. With radius 10 and a 60 degree angle, the full circle area is 314.1592653589793, the fraction is 0.16666666666666666, the sector area is 52.35987755982988 and the arc length is 10.471975511965978.

What Is The Area Of A Circle Sector?

A circle sector is the region bounded by two radii and the arc that joins their endpoints, rather like a single slice cut from a round cake. The two radii meet at the centre of the circle, and the angle between them is called the central angle. Because the sector is carved out of the whole circle, its area is simply the full circle's area multiplied by the fraction of a complete turn that the central angle represents. That fraction is the central angle in degrees divided by 360. Everything else about the slice, including its arc length and its perimeter, follows from the very same fraction.

The area of a complete circle is πr², where r is the radius. A full turn measures 360 degrees, so a central angle of θ degrees captures exactly θ/360 of that turn. Multiplying the two ideas together gives the sector area as (θ/360) × πr². With a radius of 10 and an angle of 60 degrees, the full circle area is 314.1592653589793 and the fraction is 0.16666666666666666, so the slice covers 52.35987755982988 square units. Notice that the fraction is applied to the whole circle's area rather than added to it, which is why the answer is smaller than the circle.

The same θ/360 fraction also gives the arc length, which is the portion of the circumference lying on the boundary of the sector. The circumference of a full circle is 2πr, so the arc length is (θ/360) × 2πr. For the radius-10, 60-degree example the circumference is 62.83185307179586 and the arc measures 10.471975511965978 units. Area and arc length therefore rise together: double the angle while holding the radius fixed and both quantities double. They differ only in what is being fractioned, namely square units of area on one hand and ordinary units of length on the other.

Degrees are the convention used throughout this page, and the divisor 360 belongs specifically to that convention. In radians a full turn is 2π, so the fraction becomes θ/(2π) and the sector area simplifies neatly to θr²/2. The two forms agree perfectly: 60 degrees is π/3 radians, and (π/3) × 10² / 2 returns the same 52.35987755982988. Mixing the two systems is a common source of error, so always check whether an angle is quoted in degrees or radians before choosing the divisor. The calculator on this page expects degrees and states that assumption plainly above the inputs.

Two radii cut a circle into two pieces, the smaller minor sector and the larger major sector. The central angle θ selects the minor sector, while the major sector is defined by the reflex angle 360 minus θ. With a 60-degree minor slice, the complementary major sector spans 300 degrees and covers five sixths of the circle. Its area works out at 261.79938779914943, which is exactly the full circle area minus 52.35987755982988. The two pieces add back to 314.1592653589793, giving a simple way to confirm that a calculation has gone correctly.

Sector area grows in direct proportion to the central angle when the radius is held fixed, and in proportion to the square of the radius when the angle is held fixed. Raising the angle from 60 to 120 degrees doubles the area from 52.35987755982988 to 104.71975511965977. Doubling the radius instead multiplies the area by four, because the radius appears squared inside πr². This quadratic dependence on radius explains why a modest change in the size of a circular plot produces a much larger change in its area. Keeping the two effects separate makes it far easier to predict how a sector responds when either input changes.

The boundary of a sector consists of the arc plus the two straight radii, so its perimeter is the arc length plus 2r. For the example slice that is 10.471975511965978 plus 20, giving 30.47197551196598 units in total. This is worth distinguishing from the arc length alone, which measures only the curved portion. A frequent textbook question asks for the perimeter of a sector, and forgetting to add the two radii is the usual mistake. Area has no such additive term at all, being purely the selected fraction of the full circle.

Sectors appear whenever a circle is divided into shares. Pie charts assign each category a central angle proportional to its share of the total, and the area of each slice encodes exactly the same proportion. Circular garden beds, pizza portions and the swept area of a windscreen wiper are all sectors in practice. Engineers apply the identical fraction when they calculate an annular sector, which is the difference between two sectors drawn with different radii. Even the ground covered by a rotating radar beam over a fixed angular range is a sector area in disguise.

A few boundary cases help to anchor the formula in something concrete. At an angle of 360 degrees the sector is the entire circle and its area equals πr², while at zero degrees it collapses to a line and the area is zero. At 180 degrees it is a semicircle holding half the circle's area, and at 90 degrees it is a quarter circle. The formula assumes a positive radius and an angle between 0 and 360 degrees for the minor sector, since negative or out-of-range values carry no meaning here. Units matter too: a radius measured in metres yields an area in square metres, whereas the arc length stays in metres.

Formula

A = (θ / 360) × πr²

Formula page →

Take the area of the full circle and multiply by the fraction of a complete turn represented by the central angle. The divisor 360 applies only when the angle is measured in degrees.

SymbolMeaning
θCentral angle in degrees
rRadius of the circle
AArea of the sector

L = (θ / 360) × 2πr

Formula page →

The curved edge of the sector is the same fraction of the full circumference that the angle is of a full turn. This gives a length, not an area.

SymbolMeaning
θCentral angle in degrees
rRadius of the circle
LArc length

A(full) = πr²; f = θ / 360; A = f × A(full)

Formula page →

Compute the circle's total area and the fraction of a turn as two separate quantities, then multiply them. The same fraction f also converts the circumference into the arc length.

SymbolMeaning
θCentral angle in degrees
fSector fraction
A(full)Area of the complete circle

How To Calculate The Area Of A Circle Sector

  1. 1

    Read off the radius and the central angle

    Identify the radius r and the central angle θ, and confirm that the angle is quoted in degrees before doing anything else. This page and its calculator both use the degrees convention, so an angle of 60 means 60/360 of a full turn. If a question gives the answer in radians, convert it first by multiplying by 180/π. Write the two inputs down explicitly, since nearly every later error can be traced back to misreading one of them.

  2. 2

    Compute the full circle area

    Square the radius and multiply by π to obtain the area of the entire circle, which acts as the anchor for the calculation. With r = 10 the calculation is π × 10 × 10 = 314.1592653589793 square units. Keep this value at full precision rather than rounding it to 314, because the fraction in the next step will scale it. If the radius is in centimetres, the result is in square centimetres.

  3. 3

    Find the sector fraction

    Divide the central angle by 360 to find what share of the circle the slice occupies. For θ = 60 degrees the fraction is 60/360 = 0.16666666666666666, which is one sixth. A useful sanity check is that the fraction must lie between zero and one for a minor sector, and that common angles give familiar shares: 90 degrees is one quarter and 180 degrees is one half.

  4. 4

    Multiply to get the sector area

    Multiply the full circle area by the sector fraction to get the area of the slice. For the example that is 314.1592653589793 × 0.16666666666666666 = 52.35987755982988 square units. Equivalently, evaluate (60/360) × π × 10² in one line. The answer must be smaller than 314.1592653589793 and larger than zero; if it is not, the fraction was applied in the wrong direction.

  5. 5

    Find the arc length and check the result

    Apply the same fraction to the circumference to get the arc length: 2π × 10 × 0.16666666666666666 = 10.471975511965978 units. Then check the whole calculation for consistency. The sector area should be less than the circle area, the arc should be less than the full circumference of 62.83185307179586, and the area must be reported in square units while the arc stays in ordinary length units. If a perimeter is requested, remember to add the two radii to the arc.

Examples

Example 1: Radius 10, angle 60 degrees — the area of the slice

radius
10
angleDegrees
60
StepCalculationResult
Full circle areapiValue × radius × radius = 3.141592653589793 × 10 × 10314.1592653589793
Sector fractionangleDegrees / 360 = 60 / 3600.16666666666666666
Sector areafullCircleAreaRaw × angleDegrees / 36052.35987755982988

Result: For a radius of 10 and a central angle of 60 degrees, the sector area is 52.35987755982988 square units, exactly one sixth of the whole circle.

Example 2: Radius 10, angle 60 degrees — the length of the arc

radius
10
angleDegrees
60
StepCalculationResult
Full circumference2 × piValue × radius = 2 × 3.141592653589793 × 1062.83185307179586
Sector fractionangleDegrees / 360 = 60 / 3600.16666666666666666
Arc length2 × piValue × radius × angleDegrees / 36010.471975511965978

Result: For the same radius of 10 and 60 degree angle, the arc length along the curved edge is 10.471975511965978 units.

Example 3: Radius 10, angle 60 degrees — the fraction and the anchor circle

radius
10
angleDegrees
60
StepCalculationResult
Central angleangleDegrees60
Sector fractionangleDegrees / 360 = 60 / 3600.16666666666666666
Full circle areapiValue × radius × radius314.1592653589793

Result: A 60 degree slice is a fraction of 0.16666666666666666 of a full circle, and that full circle has an area of 314.1592653589793 square units.

Calculator

Sector area

52.3599

Arc length
10.472
Full circle area
314.1593
Sector fraction
0.1667

Values update as you type. This calculator covers the single scenario its formula assumes — see Common Mistakes for what it leaves out.

Prefer a full-width tool? Open the The Area Of A Circle Sector calculator page.

Common Mistakes

  • Forgetting to divide by 360

    Using θπr² instead of (θ/360)πr² multiplies the answer by 360 and produces a slice larger than the entire circle. The divisor is the whole point of the calculation. A quick check is that any minor sector must have an area smaller than πr², so a result above that anchor flags the missing division immediately.

  • Mixing degrees with radians

    The factor 360 belongs to degrees; in radians the divisor is 2π and the area simplifies to θr²/2. Feeding a radian measure such as π/3 into the degrees formula gives a tiny and plainly wrong slice. Check the units attached to the angle and convert before substituting, and remember that 60 degrees and π/3 radians describe exactly the same opening.

  • Squaring the diameter instead of the radius

    The circle area uses r², not d², so a diameter of 20 must first be halved to a radius of 10. Squaring the diameter makes the anchor area four times too large and carries that error straight into the sector area. If a problem states the diameter, write r = d/2 at the top of your working.

  • Confusing sector area with arc length

    Area is a fraction of πr² and is measured in square units, whereas arc length is a fraction of 2πr and is measured in ordinary length units. The two share the same fraction but not the same formula. For the example slice they are 52.35987755982988 and 10.471975511965978 respectively, and swapping them would be dimensionally impossible.

  • Choosing the reflex angle for a minor sector

    Two radii define both a minor and a major sector, with angles θ and 360 minus θ. Most questions mean the smaller one, so using 300 degrees where 60 was intended gives five sixths of the circle instead of one sixth. Read the wording carefully, and if a major sector is required, compute it as the full circle minus the minor slice.

  • Rounding π before the final step

    Substituting 3.14 for π turns the anchor 314.1592653589793 into 314 and the sector area into roughly 52.333, which loses accuracy for no benefit. Keep the full value of π through the working and round only the number you finally display. Stored reference values such as 52.35987755982988 should never be shortened mid-calculation.

FAQ

What exactly is a circle sector?

A sector is the region enclosed by two radii of a circle and the arc between their endpoints. The angle between the radii, measured at the centre, is called the central angle. A small central angle gives a thin slice, while an angle of 180 degrees gives a semicircle. The sector is always a fixed share of the full circle determined by that angle.

Why do we divide the central angle by 360?

A complete turn is 360 degrees, so an angle of θ degrees represents the fraction θ/360 of that turn. Since the sector is the same share of the circle's area, multiplying πr² by θ/360 gives its area. The divisor changes to 2π only if the angle is measured in radians instead.

What is the area of a sector with radius 10 and angle 60 degrees?

The full circle has area 314.1592653589793, and 60 degrees is one sixth of a turn, with fraction 0.16666666666666666. Multiplying gives a sector area of 52.35987755982988 square units. The arc length of the same slice is 10.471975511965978 units.

How is arc length related to the sector area?

Both use the same central-angle fraction. Area is that fraction of πr², while arc length is the same fraction of the circumference 2πr. Consequently, doubling the central angle doubles both quantities. They are different kinds of measurement, one in square units and the other in length units.

How do I find the area of the major sector?

Find the minor sector first using θ/360, then subtract that area from the full circle area πr². Equivalently, use the reflex angle 360 minus θ directly in the same formula. With a 60 degree minor slice of 52.35987755982988, the major sector covers 300 degrees and has area 261.79938779914943.

Does the formula work if the radius is measured in centimetres?

Yes, the arithmetic is unchanged as long as the units are consistent. A radius in centimetres gives a sector area in square centimetres and an arc length in centimetres. Convert all lengths to the same unit before substituting, and label the final answer clearly so the scale is not mistaken.

References