Geometry
Lateral surface area of a rectangular prism
Add only the four upright faces, excluding the top and bottom. Equivalently, multiply the height by the perimeter of the base.
Last updated
The Formula
LSA = 2lh + 2wh = 2h(l + w)
Add only the four upright faces, excluding the top and bottom. Equivalently, multiply the height by the perimeter of the base.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| l | Length | length units | One edge of the rectangular base. |
| w | Width | length units | The other edge of the rectangular base. |
| h | Height | length units | The distance between the two excluded bases. |
What Each Symbol Means
llength units
Length
One edge of the rectangular base.
wlength units
Width
The other edge of the rectangular base.
hlength units
Height
The distance between the two excluded bases.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate the surface area of a rectangular prism page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate The Surface Area Of A Rectangular Prism, filed under Math. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Lateral surface area of a rectangular prism?
The formula for Lateral surface area of a rectangular prism is LSA = 2lh + 2wh = 2h(l + w). Add only the four upright faces, excluding the top and bottom. Equivalently, multiply the height by the perimeter of the base.
What units should I use with Lateral surface area of a rectangular prism?
Substitute l in length units, w in length units, h in length units. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Lateral surface area of a rectangular prism?
Confusing total with lateral surface area. Lateral area excludes the top and bottom and equals 2lh + 2wh, which is 70 for the default prism rather than 94. Read the question carefully: a problem about wrapping a whole box wants the total, while one about painting four walls wants the lateral figure.