Mechanics
Deceleration and stopping time
Friction produces a deceleration of mu times g, independent of mass. Dividing a starting speed by that deceleration gives the time needed to come to rest under sliding friction.
Last updated
The Formula
t = v / (mu x g)
Friction produces a deceleration of mu times g, independent of mass. Dividing a starting speed by that deceleration gives the time needed to come to rest under sliding friction.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| t | Stopping time | s | 3.397893306150187 seconds from a speed of 10 metres per second. |
| v | Starting speed | m/s | 10 metres per second in the worked example. |
| mu | Coefficient of kinetic friction | dimensionless | 0.3 gives a deceleration of 2.943 metres per second squared. |
What Each Symbol Means
ts
Stopping time
3.397893306150187 seconds from a speed of 10 metres per second.
vm/s
Starting speed
10 metres per second in the worked example.
mudimensionless
Coefficient of kinetic friction
0.3 gives a deceleration of 2.943 metres per second squared.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate kinetic friction page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Kinetic Friction, filed under Science. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Deceleration and stopping time?
The formula for Deceleration and stopping time is t = v / (mu x g). Friction produces a deceleration of mu times g, independent of mass. Dividing a starting speed by that deceleration gives the time needed to come to rest under sliding friction.
What does each symbol in Deceleration and stopping time stand for?
t is stopping time; v is starting speed; mu is coefficient of kinetic friction.
What units should I use with Deceleration and stopping time?
Substitute t in s, v in m/s, mu in dimensionless. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Deceleration and stopping time?
Assuming contact area changes the friction. The linear friction model has no area term. A block resting on its broad face and on its narrow edge experiences the same friction, because a smaller contact area means a proportionally larger pressure. Resist the intuition that more surface means more grip.