Electricity
Force on a charge in the field
The field is force per unit charge, so multiplying by the charge gives the force. The direction depends on the sign of the charge.
Last updated
The Formula
F = q x E
The field is force per unit charge, so multiplying by the charge gives the force. The direction depends on the sign of the charge.
| Symbol | Meaning | Unit | Notes |
|---|---|---|---|
| F | Force on the charge | N | Magnitude of the electrostatic force on the test charge. |
| q | Charge magnitude | C | Size of the charge placed in the field. |
| E | Electric field strength | V/m | Field found from the voltage and plate separation. |
What Each Symbol Means
FN
Force on the charge
Magnitude of the electrostatic force on the test charge.
qC
Charge magnitude
Size of the charge placed in the field.
EV/m
Electric field strength
Field found from the voltage and plate separation.
See It Worked With Real Numbers
A formula on its own does not tell you which number goes where. The how to calculate electric field strength page applies this equation to a concrete case, shows every intermediate step, and names the mistakes that produce a wrong answer even when the algebra is right.
Where This Formula Appears
This equation is the working core of How To Calculate Electric Field Strength, filed under Science. Every number the guide produces comes from substituting into this one line.
Common Questions
What is the formula for Force on a charge in the field?
The formula for Force on a charge in the field is F = q x E. The field is force per unit charge, so multiplying by the charge gives the force. The direction depends on the sign of the charge.
What does each symbol in Force on a charge in the field stand for?
F is force on the charge; q is charge magnitude; E is electric field strength.
What units should I use with Force on a charge in the field?
Substitute F in N, q in C, E in V/m. Convert every input to those units before you start, because the equation only returns the right answer when the units on both sides agree.
What is a common mistake when using Force on a charge in the field?
Leaving the separation in centimetres. The formula requires metres. A gap of 2 cm must be entered as 0.02 m; typing 2 returns a field a hundred times too small. Convert every length to metres before dividing, and sanity-check the result: a modest voltage across a small gap should give a field in the hundreds of volts per metre.